Stinger kortläsare

[ramblan]

Hej!
I oscam.server skall jag ange device med 00x:00x där jag anger bus och device. I linux får jag detta med lsbus. Hur gör jag i Windows? Har använt smargo-list. Men den ger inte rätt värde.

[ramblan]

Jag vet inte om jag kommit närmare lösningen så här, men nu har jag iallafall fått kontakt med läsaren. Jag ersatte Protocol=smartreader med protocl=mouse, dessutom bytte jag firmware i läsaren till FW_PhoenixMode125.


Jag fastnar på Initiering av kortet.


Jag använder:
-Stinger smartcard läsare
-Windows 8 (64bit) och OSCam r9665.
-cygwin (32-bit version **Versionsuppgift saknas**).

Programmet är hämtat härifrån.
http://tekreaders.com/blog/oscam/oscam-windows/

Här är loggen från när jag startar Oscam
[2014-10-26 11:25:45] - Next restart at 2014-10-27 06:00:00
[2014-10-26 11:25:45] - 2 [main] oscam 5784 find_fast_cwd: WARNING: Couldn't compute FAST_CWD pointer. Please report this problem to
[2014-10-26 11:25:45] - the public mailing list cygwin@cygwin.com
[2014-10-26 11:25:45] - 11:25:45 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9665 (i686-pc-cygwin)
[2014-10-26 11:25:45] - cygwin warning:
[2014-10-26 11:25:45] - MS-DOS style path detected: c:/oscam/var/run/oscam.pid
[2014-10-26 11:25:45] - Preferred POSIX equivalent is: /oscam/var/run/oscam.pid
[2014-10-26 11:25:45] - CYGWIN environment variable option "nodosfilewarning" turns off this warning.
[2014-10-26 11:25:45] - Consult the user's guide for more details about POSIX paths:
[2014-10-26 11:25:45] - http://cygwin.com/cygwin-ug-net/usin...sing-pathnames
[2014-10-26 11:25:45] - 11:25:45 0 s couldn't open statistics file: c:/oscam/var/log/oscam/oscamuser.log
[2014-10-26 11:25:45] - 11:25:45 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
[2014-10-26 11:25:45] - Warning: keyword 'ecmcache' in reader section not recognized
[2014-10-26 11:25:45] - 11:25:45 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
[2014-10-26 11:25:45] - 11:25:45 0 s signal handling initialized
[2014-10-26 11:25:45] - 11:25:45 0 s monitor: initialized (fd=3, port=988)
[2014-10-26 11:25:45] - 11:25:45 0 s newcamd: initialized (fd=4, port=13000)
[2014-10-26 11:25:45] - 11:25:45 0 s -> CAID: 093E PROVID: 000000
[2014-10-26 11:25:45] - 11:25:45 8006D0A8 h webif: decompressed 149835 bytes back into 363004 bytes
[2014-10-26 11:25:45] - 11:25:45 8006D0A8 h HTTP Server running. ip=0.0.0.0 port=1234
[2014-10-26 11:25:45] - 11:25:45 0 s via [mouse] creating thread for device /dev/ttyS7
[2014-10-26 11:25:45] - 11:25:45 0 s loadbalancer: can't read from file /Users/m21/AppData/Local/Temp/_oscam/stat
[2014-10-26 11:25:45] - 11:25:45 0 s waiting for local card init
[2014-10-26 11:25:45] - 11:25:45 80071850 r via [mouse] Reader initialized (device=/dev/ttyS7, detect=cd, mhz=357, cardmhz=357)
[2014-10-26 11:25:46] - 11:25:46 80071850 r via [mouse] card detected
[2014-10-26 11:25:47] - 11:25:47 80071850 r via [mouse] ATR: #############
[2014-10-26 11:25:47] - 11:25:47 80071850 r via [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
[2014-10-26 11:25:47] - 11:25:47 80071850 r via [mouse] Setting baudrate to 9600 bps
[2014-10-26 11:25:47] - 11:25:47 80071850 r via [mouse] Calculated work ETU is 104.20 us reader mhz = 357
[2014-10-26 11:25:48] - 11:25:48 80071850 r via [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
[2014-10-26 11:25:51] - 11:25:51 80071850 r via [mouse] card system not supported
[2014-10-26 11:25:51] - 11:25:51 80071850 r via [mouse] Normal mode failed, reverting to Deprecated Mode
[2014-10-26 11:25:52] - 11:25:52 80071850 r via [mouse] ATR: ##########
[2014-10-26 11:25:52] - 11:25:52 80071850 r via [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
[2014-10-26 11:25:52] - 11:25:52 80071850 r via [mouse] Calculated work ETU is 104.20 us reader mhz = 357
[2014-10-26 11:25:52] - 11:25:52 80071850 r via [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
[2014-10-26 11:25:55] - 11:25:55 80071850 r via [mouse] card system not supported
[2014-10-26 11:25:55] - 11:25:55 80071850 r via [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
[2014-10-26 11:25:55] - 11:25:55 80071850 r via [mouse] card initializing error
[2014-10-26 11:25:56] - 11:25:56 0 s init for all local cards done
[2014-10-26 11:25:56] - 11:25:56 0 s anti cascading disabled
[2014-10-26 11:26:00] - Stoping "oscam.exe"...
[2014-10-26 11:26:00] - Oscam is stopped!


Min Konfigurering
[oscam.server]
[reader]
label = via
enable = 1
protocol = mouse
detect = CD
Device = /dev/ttyS7
caid = 093E
cardmhz = 357
ident = 093E:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100
boxid = ########
services = services1


Jag börjar få slut på ideer. Är det någon som kan hjälpa mig framåt?