MGcamd1.35 + newcs

[ricki]

Hur kopierar jag enklast texten från putty?

[Minime]

Markera texten så är det kopierat...

[ricki]

vuduo login: root
Last login: Thu Apr 7 21:06:43 on pts/1
root@vuduo:~# ls -l /dev/sci*
crw-r--r-- 1 root root 242, 0 Sep 18 2009 /dev/sci0
crw-r--r-- 1 root root 243, 0 Sep 18 2009 /dev/sci1
root@vuduo:~# ls -l /dev/sci*
crw-r--r-- 1 root root 242, 0 Sep 18 2009 /dev/sci0
crw-r--r-- 1 root root 243, 0 Sep 18 2009 /dev/sci1
root@vuduo:~#

[Minime]

Ser korrekt ut det med? Humm skummt...
Kolla så att du inte redan har en newcs session igång.
skriv: killall -9 newcs
sedan försöker du starta newcs igen....

[ricki]

ID, skipping...
[ 21:36:59 ] [ Config ] Pincode for device 1 (Upper Cardreader): 0000
[ 21:36:59 ] [ Config ] /dev/sci1 ECM priority: round
[ 21:36:59 ] [ EMM Cache ] Initialising dynamic Cache
[ 21:36:59 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 785
[ 21:36:59 ] [ Loader ] Starting Telnet on port 1001
[ 21:36:59 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:36:59 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:36:59 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:36:59 ] [ Sci ] No card present in reader
[ 21:36:59 ] [ Loader ] Reset failed ...
[ 21:36:59 ] [ Loader ] Starting Newcamd Server on port 10000
[ 21:36:59 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 21:36:59 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 21:36:59 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:36:59 ] [ Sci ] resetting card now
[ 21:36:59 ] [ Sci ] Reset
[ 21:36:59 ] [ Newcamd ] Newcamd thread Server started on port 10000
newcamd: main loop
[ 21:37:00 ] [ Sci ] Card reset

[ricki]

[ 21:41:48 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:41:48 ] [ Sci ] No card present in reader
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:41:48 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci0
[ 21:41:48 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 21:41:48 ] [ Sci ] Closing device /dev/sci1 [Handle=3]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:41:48 ] [ Sci ] No card present in reader
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:41:48 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci0
[ 21:41:48 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 21:41:48 ] [ Sci ] Closing device /dev/sci1 [Handle=3]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:41:48 ] [ Sci ] No card present in reader
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:41:48 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci0
[ 21:41:48 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 21:41:48 ] [ Sci ] Closing device /dev/sci1 [Handle=3]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:41:48 ] [ Sci ] No card present in reader
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:41:48 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci0
[ 21:41:48 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:48 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 21:41:48 ] [ Sci ] Closing device /dev/sci1 [Handle=3]
[ 21:41:48 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:41:48 ] [ Sci ] No card present in reader
[ 21:41:48 ] [ Loader ] Reset failed ...
[ 21:41:49 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:41:49 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:41:49 ] [ Sci ] Opening device /dev/sci0
[ 21:41:49 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:41:49 ] [ Loader ] Reset failed ...
[ 21:41:49 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 21:41:49 ] [ Sci ] Closing device /dev/sci1 [Handle=3]
[ 21:41:49 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:41:49 ] [ Sci ] No card present in reader
[ 21:41:49 ] [ Loader ] Reset failed ...

[Minime]

Den känner inte av kortet i sci0 (Första kortläsaren)
[ 21:36:59 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:36:59 ] [ Sci ] No card present in reader
[ 21:36:59 ] [ Loader ] Reset failed ...

Kolla så du tryckt in kortet(en) ordentligt med chipet nedåt.

ser ut som den finner ett kort i sci1 (den högra läsaren tror jag)
och den resettar kortet OK vad jag kan se.
[ 21:36:59 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 21:36:59 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 21:36:59 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 21:36:59 ] [ Sci ] resetting card now
[ 21:36:59 ] [ Sci ] Reset

[ricki]

Det är jag som har testad olika läsare, men det blir ingen bild. Den enda camen jag har lyckats med är Camd3 och den måste jag installera man.
eftersom den inte finns i plis som e2 version.

[Minime]

Ahh men du, är det ett Viasat kort med med en grön "knapp" med texten "start" och en glå/grå aktig triangel "pil" på så fungerar inte den med NewCS.
du måste köra OSCam isåfalll....

[ricki]

MGcamd1.35 + newcs1.67 läser inte mitt Comhem kort med VU+, använder jag DM500 med Mgcamd och newcs fungerar det.
Någon som kan ge mig tips om vad jag ska göra?

Tror du har missat mitt första inlägg.