Får inte igång NewCS1.67 på Dreambox

[Mohseno]

Hej

Jag försöker att få igång newcs på min Dreambox.
Började med att installera newcs 1.67 samt Mgcamd 1.35a men får det inte att lira.
Har testat med massa olika konfigurationer efter att läst en del nya och gamla inlägg här utan resultat.

Min newcs.xml

<newCSconfig>
	<globals>
		
		<listening-ip>127.0.0.1</listening-ip>
	</globals>
	<readers name="Standard Phoenix on PC">
		<device>
			
			<name>Phoenix</name>
			<type>sci</type>
			<node>/dev/sci0</node>
			<parity>odd</parity>
			<reset>inverse</reset>
			<export>Yes</export>
			<enabled>Yes</enabled>
			<blocksa>No</blocksa>
			<blockua>No</blockua>
			<blockga>No</blockga>
			<crypto-special>No</crypto-special>
			<PTShandshake>No</PTShandshake>
			<carddetect>yes</carddetect>
			<newcamd_port>16050</newcamd_port>
			<autosid>Yes</autosid>
			<Seca-PPV>no</Seca-PPV>
			<priority>round</priority>
			<sid>
				<allow>
					<id></id>
				</allow>
				<deny>
					<id></id>
				</deny>
			</sid>
		</device>
	</readers>
	<radegastserver>
			<enabled>No</enabled>
			<port>10001</port>
			<allow>
				<hostname>localhost</hostname>
			</allow>
	</radegastserver>
	<cache>
			<emm>20</emm>
			<ecm>-1</ecm>
	</cache>
	<httpd>
		<server> 
			<port>8080</port>
			<enabled>yes</enabled>
		</server>
		<user>
			<name>newcs</name>
			<password>newcs</password>
			<accesslevel>admin</accesslevel>
		</user>
	</httpd>
	<debug>
			<password>NewCSpwd</password>
			<mode>simple</mode>
			<level>internal</level>
			<type>all</type>
			<output>file</output>
			<logfile>/tmp/newcs-log.txt</logfile>
	</debug>
	<newcamdserver>
		<enabled>Yes</enabled>
		<name>newcs</name>
		<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
			
		<user>
			<name>dummy</name>
			<password>dummy</password>
			<au>on</au>
			<spider>no</spider>
			<readers>
				<allow>Phoenix</allow>
			</readers>
		</user>		
	</newcamdserver>
</newCSconfig>

Min newcamd.list

CWS_KEEPALIVE = 300
CWS = localhost 16050 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Jag har även lagt in CWS-raden i newcamd.conf

Newcs loggen:

[ 01:44:47 ] [ Box detect ] Box type 7 (Dream Multimedia (MIPS) HD Box)
[ 01:44:47 ] [ Config ] Option <blockc0> for device 0 (Phoenix) not present, defaulting to NO
[ 01:44:47 ] [ Config ] Option <mhz> for device 0 (Phoenix) not present, defaulting to 357
[ 01:44:47 ] [ Config ] Option <protectedsid> for device 0 (Phoenix) not present, no PIN Code will be sent
[ 01:44:47 ] [ Config ] /dev/sci0 ECM priority: round
[ 01:44:47 ] [ Newcamd ] Server name : newcs
[ 01:44:47 ] [ Newcamd ] Des key     : 0102030405060708091011121314
[ 01:44:47 ] [ Config ] Option <hostname> or <port> not present for User: dummy, DISABLING reverse login
[ 01:44:47 ] [ Config ] Option <sidoverride> not present for User: dummy, defaulting to OFF
[ 01:44:47 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 0
[ 01:44:47 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 01:44:47 ] [ EMM Cache ] Initialising dynamic Cache
[ 01:44:47 ] [ ECM Cache ] Initialising dynamic Cache
[ 01:44:47 ] Calibrating delay loops
[ 01:44:47 ] usleep(5) takes: 0 s 25 us
[ 01:44:47 ] usleep(10) takes: 0 s 16 us
[ 01:44:47 ] usleep(100) takes: 0 s 107 us
[ 01:44:47 ] usleep(500) takes: 0 s 541 us
[ 01:44:47 ] Allocation memory for 200 regular users
[ 01:44:47 ] [ Loader ] Starting Telnet on port 0
[ 01:44:47 ] [ SockSrv ] Server thread started
[ 01:44:47 ] [ Loader ] Started HTTP-server on port: 8080
[ 01:44:47 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 01:44:47 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 01:44:47 ] [ CardMan ] Reseting reader parameters
[ 01:44:47 ] [ Sci ] Opening device /dev/sci0
[ 01:44:47 ] [ Sci ] Detected DM800 SCI
[ 01:44:47 ] [ Sci ] resetting card now
[ 01:44:47 ] [ Sci ] Reset 
[ 01:44:50 ] [ Sci ] NO ATR Received 
[ 01:44:50 ] [ Sci ] Card reset
[ 01:44:50 ] [ Sci ] Timeout is 3743808us
[ 01:44:54 ] [ Sci ] Read Timeout (0 of 1)
[ 01:44:54 ] Sci_read: 

[ 01:44:54 ] [ Sci ] No ATR received. resetting again
[ 01:44:54 ] [ Sci ] Reset 
[ 01:44:57 ] [ Sci ] NO ATR Received 
[ 01:44:57 ] [ Sci ] Timeout is 3743808us
[ 01:45:02 ] [ Sci ] Read Timeout (0 of 1)
[ 01:45:02 ] Sci_read: 

[ 01:45:02 ] [ Sci ] NO Card ATR data detected
[ 01:45:02 ] [ Loader ] Reset failed ...
[ 01:45:02 ] [ Loader ] Starting Newcamd Server on port 16050
[ 01:45:02 ] [ NewCS ] Ready to GO! :)
[ 01:45:02 ] [ Card queue /dev/sci0 ] Starting...
[ 01:45:02 ] [ Newcamd ] Newcamd thread Server started on port 16050
[ 01:45:02 ] [ Newcamd ] new connection from 127.0.0.1 on socket 9
[ 01:45:02 ] [ Newcamd:16050 ] Connection from 127.0.0.1
[ 01:45:02 ] [ Newcamd:16050 ] User dummy logged in, client: Mgcamd
[ 01:45:02 ] [ Newcamd:16050 ] Command E3 from dummy len 3
[ 01:45:02 ] [ Newcamd:16050 ] Sending Card Information to dummy:
[ 01:45:02 ] [ Newcamd:16050 ] Command D6 from dummy len 3
[ 01:45:02 ] [ Newcamd:16050 ] get version from dummy

Kan nån vara snäll och hjälpa mig lite på traven.
Jag är rätt Noob på det här.

Tack på förhand!!

[Mohseno]

Fan vilken N00b jag e.
Jag hade kortet felvänd.
Nu får jag iaf in SVT 1, SVT 2, TV 3 men resten av kanalerna funkar inte.

Nån som vet vad jag har missat?

[matkoh]

Hmmmm

Och vad får du för resultat när du startar newcs från prompt i boxen ?? Vilken operatör ? Har du Viasat så måste du ha oscam.

[Mohseno]

Sorry att jag gav för lite info.
Jag kör Comhem.

Canal+kanalerna visas utan problem.
Men inte Viasat eller basutbudet (Kanal 5, tv4 plus etc.)

Vad menar du med att starta newcs från prompten i boxen?
Jag startar den genom blue panel.
Sorry om jag ställer dumma frågor.

[Mohseno]

Nu har jag fått igång den.

[sleddog]

Nu har jag fått igång den.

Kan ju underlätta för andra om du talar om vad du gjorde så att andra kan lära sig?