Resultat 1 till 5 av 5

Ämne: Boxer + TVHeadend + OSCam problemer

  1. #1

    Boxer + TVHeadend + OSCam problemer

    Hei,

    Jeg har i lang tid kæmpet med at få Boxer [DK] + TVHeadend + OSCam til at virke så jeg kan se de krypterede kanaler.

    Selve Boxer + TVHeadend setuppet virker som det skal, jeg kan bare ikke se de krypterede kanaler.

    OSCam loggen ser umiddelbart fin nok ud:

    Kod:
    2016/08/13 14:39:13 49E42XXX c      (ecm) anonymous (0500@040100/XXXX/XXXX/AA:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX): found (321 ms) by boxer
    TVHeadend loggen ser også fin ud:
    Kod:
    2016-08-13 16:42:32.246 mpegts: 738MHz in BoxerTV - tuning on SAT>IP DVB-T Tuner #1 (10.10.20.254)
    2016-08-13 16:42:32.246 capmt: Oscam : Starting CAPMT server for service "TV3" on adapter 0
    2016-08-13 16:42:32.246 subscription: 011B: "HTTP" subscribing on channel "TV3", weight: 100, adapter: "SAT>IP DVB-T Tuner #1 (10.10.20.254)", network: "BoxerTV", mux: "738MHz", provider: "Viasat", service: "TV3", profile="pass", hostname="10.10.0.106", username="tv", client="VLC/2.2.1 LibVLC/2.2.1"
    2016-08-13 16:42:33.610 mpegts: mux 738MHz in BoxerTV old params DVB-T freq 738000000 bw 8MHz cons QAM/64 hier NONE code_rate 3/4:2/3 guard 1/4 trans 8k plp_id -1 (00000020)
    2016-08-13 16:42:33.611 mpegts: mux 738MHz in BoxerTV new params DVB-T freq 738000000 bw 8MHz cons QAM/64 hier NONE code_rate 3/4:NONE guard 1/4 trans 8k plp_id -1 (00000020)
    Men jeg får hverken billede eller lyd på.

    Jeg bruger OctopusNet som tuner, jeg skulle gerne køre den nyeste OSCam der er tilgængelig og jeg kører TVHeadend 4.1-2141~g01c26fc som jeg selv har compilet.

    Hvor skal jeg starte med at fejlsøge?

    Jeg har prøvet at sætte CA i TVHeadend er sat op som både CAPMT og newcamd - begge giver samme resultat. Dog giver det følgende når den er sat op som newcamd:

    Kod:
    2016-08-13 16:49:55.224 descrambler: cannot decode packets for service "TV3"
    2016-08-13 16:50:02.727 TS: BoxerTV/738MHz/TV3: TELETEXT @ #3131 Continuity counter error (total 582)
    2016-08-13 16:50:02.727 TS: BoxerTV/738MHz/TV3: H264 @ #3111 Continuity counter error (total 587)
    2016-08-13 16:50:02.727 TS: BoxerTV/738MHz/TV3: AAC @ #3121 Continuity counter error (total 112)

  2. #2
    Ingen der har nogle guldkorn til hvor jeg skal kigge henne?

  3. #3
    Seniormedlem
    Reg.datum
    Jun 2011
    Inlägg
    154
    Tackad
    7 gånger
    Hej! Jag skulle nog försöka konfigurera ett newcamd protokollet mellan oscam och tvheadend, för mig brukar det fungera bättre. Avaktivera i så fall alla andra anslutningar och dra ur eventuell ca-modul ur tv-kortet.

    Skickat från min HTC One_M8 via Tapatalk

  4. #4
    Hej @bifurkation!

    Jeg har nu prøvet at sætte det op med newcamd i stedet desværre uden held.
    - Der er intet i oscam loggen og det eneste jeg får i tvheadend loggen er følgende:

    Kod:
    2016-09-24 21:00:59.561 TS: BoxerTV/738MHz/TV3 Sport 1: H264 @ #3161 Continuity counter error (total 12)
    2016-09-24 21:00:59.562 TS: BoxerTV/738MHz/TV3 Sport 1: AC3 @ #3171 Continuity counter error (total 12)
    Jeg kom lige i tanke om - kan det måske være kortlæseren den er gal med? Lige nu bruger jeg en Omnikey 3121 kortlæser og har derfor ikke noget CI+ modul imellem kortet og kortlæseren.. Nogle der kan anbefale en kortlæser der virker hvis det kan være årsgen?

  5. #5
    Nu har jeg prøvet at sætte det op på en 32bit maskine i stedet for en Raspberry Pi for at se om det var noget der der ødelagde det - men jeg får stadig ikke noget hul igennem.

    Debug log fra tvheadend:

    Kod:
    2016-10-12 23:43:34.505 [   INFO]:subscription: 001F: "10.10.0.99 [ tv | Kodi Media Center ]" unsubscribing from "DR K", hostname="10.10.0.99", username="tv", client="Kodi Media Center"
    2016-10-12 23:43:34.508 [  TRACE]:descrambler: mux 0x17e9940 open pid 0BE1 (3041) (flags 0x0100) for 0x16cd1d0
    2016-10-12 23:43:34.508 [  DEBUG]:cwc: BoxerTV/738MHz/TV 2 (Lorry) using CWC 10.10.0.139:4321
    2016-10-12 23:43:34.508 [   INFO]:subscription: 0020: "10.10.0.99 [ tv | Kodi Media Center ]" subscribing on channel "TV 2 (Lorry)", weight: 150, adapter: "SAT>IP DVB-T Tuner #3 (10.10.20.253)", network: "BoxerTV", mux: "738MHz", provider: "TV 2|DANMARK", service: "TV 2 (Lorry)", profile="htsp", hostname="10.10.0.99", username="tv", client="Kodi Media Center"
    2016-10-12 23:43:34.645 [  DEBUG]:cwc: ECM state INIT
    2016-10-12 23:43:34.645 [  DEBUG]:cwc: Insert new ECM (PID 3041) for service "TV 2 (Lorry)"
    2016-10-12 23:43:34.645 [  DEBUG]:cwc: Sending ECM (PID 3041) section=0/0, for service "TV 2 (Lorry)" (seqno: 65535)
    2016-10-12 23:43:34.645 [  TRACE]:descrambler: ECM message (section 128, len 388, pid 3041) for service "TV 2 (Lorry)"
    2016-10-12 23:43:35.147 [  TRACE]:descrambler: initial stream key set to odd for service "TV 2 (Lorry)"
    2016-10-12 23:43:36.000 [  TRACE]:cwc: sending message sid 0 len 26 enq 0
    2016-10-12 23:43:36.000 [  TRACE]:cwc: [......]
    2016-10-12 23:43:36.000 [  TRACE]:cwc: [......]      
    2016-10-12 23:43:36.561 [  ERROR]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:36.716 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:36.778 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:36.882 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:37.003 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:37.186 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:37.407 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:37.539 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:37.610 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:37.731 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:37.949 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:38.229 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:38.409 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:38.484 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:38.636 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:38.893 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:39.135 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:39.302 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:39.409 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:39.541 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:39.688 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:39.875 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:40.145 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:40.218 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:40.323 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:40.556 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:40.728 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:41.078 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:41.304 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:41.444 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:41.700 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:42.003 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:42.220 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:42.313 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:42.429 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:42.493 [  TRACE]:descrambler: stream key changed to even for service "TV 2 (Lorry)"
    2016-10-12 23:43:42.666 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:42.849 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:43.002 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:43.216 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:43.306 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    2016-10-12 23:43:43.529 [  TRACE]:descrambler: cannot decode packets for service "TV 2 (Lorry)"
    Jeg bruger newcamd mellem tvheadend og oscam, og jeg bruger en Omnikey 3121 kortlæser tilsluttet via USB og med PCSC protokollen

Liknande ämnen

  1. Svar: 14
    Senaste inlägg: 2015-10-17, 15:46
  2. Svar: 3
    Senaste inlägg: 2015-03-11, 23:36
  3. [LÖST] Tvheadend -> Oscam Emm uppdaeringar funkar inte
    Av ocra i forum Boxer
    Svar: 33
    Senaste inlägg: 2013-09-02, 10:47

Taggar för det här ämnet

Behörigheter för att posta

  • Du får inte posta nya ämnen
  • Du får inte posta svar
  • Du får inte posta bifogade filer
  • Du får inte redigera dina inlägg
  •  
stöd oss
ComHit.net är en ideell sidan som drivs helt utan reklamintäkter, detta för att du som användare ska slippa all störande reklam och diskutera de saker du är intresserad av.
Skulle man däremot känna att man vill donera en slant för att hjälpa ComHit.net att bli bättre är ni välkomna att donera via länken nedan.

https://www.paypal.me/comhit/
Följ oss