Problem med initiering av kortläsaren

[aliljenb]

När jag startar OScam med kortet i läsaren går det fel vi initieringen:

2016/01/19 20:28:34 0DF26C0B r   (reader) lower_card [internal] card detected              
2016/01/19 20:28:35 0DF26C0B r   (reader) lower_card [internal] ATR: 00 00                                                                          
2016/01/19 20:28:35 0DF26C0B r   (reader) lower_card [internal] ERROR: Could not read reader->convention                      
2016/01/19 20:28:35 0DF26C0B r   (reader) lower_card [internal] Error activating card.

Om jag istället startar om OScam och efter en stund sätter i kortet fungerar det som det skall:

2016/01/19 20:34:26 48F5EAEF r   (reader) lower_card [internal] card detected                                                                         
2016/01/19 20:34:27 48F5EAEF r   (reader) lower_card [internal] ATR: 3F 7F 11 25 03 33 B0 09 69 FF 4A 50 70 00 00 56 54 01 00 00   
2016/01/19 20:34:27 48F5EAEF r   (reader) lower_card [internal] Init card protocol T0, FI=1, F=372, D=1, N=3  
2016/01/19 20:34:27 48F5EAEF r   (reader) lower_card [internal] Calculated work ETU is 82.67 us reader mhz = 450
2016/01/19 20:34:30 48F5EAEF r   (reader) lower_card [internal] Buffers readed  0 bytes total time_us 3100786                                       
2016/01/19 20:34:31 48F5EAEF r   (reader) lower_card [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specif
2016/01/19 20:34:32 48F5EAEF r   (reader) lower_card [internal] Card type:   VTTV
...
Osv.

Så här ser oscam.server ut:

[reader]
label                         = MyCard
enable                        = 1
protocol                      = internal
device                        = /dev/sci1
detect                        = cd
caid = 090F
mhz                           = 357
cardmhz                       = 357
group                         = 1
audisabled                    = 0
emmcache                      = 1,3,15,0
ratelimitecm                  = 4
ratelimitseconds              = 9
ecmunique                     = 0
srvidholdseconds              = 2
cooldown                      = 30,600
readtiers = 2

Något som ser skumt ut är texten "ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specif" i loggen...
Borde det inte stå 3.57 MHz??

Någon som har samma problem?