Nauleem
var köpte du boxen ?
Så att inte andra köper där,@ säggat du ska lägga ut att de säljer clon boxar.
Det fins återställning det är ju lite lättare om du tagit dump på boxen innan du uppdaterade.
http://www.mediafire.com/?oo2inr28qajbfai
How to flash the EROM using RS232 cable (when you mess up your box)
1. Connect the RS232 cable between Skybox F3 and your computer.
2. Plug the power cable of the Skybox F3, but don't need to turn on the switch at the back of the unit.
3. Start EromUpgrade.exe.
4. Select connection port, normally it should be COM1.
5. Choose "Upgrade" as Operate Mode.
6. Click the "Browse" button and select the Skybox F3 firmware.
7. Check the "Include Bootloader" box.
8. Click "Next".
9. When the screen show "Synchronizing STBS ...", turn on the switch at the back.
10. When the screen show "Done", press the power button (at the front) once.
11. Wait until the firmware uploading process finish, click "Next".
12. Wait until the firmware flashing process finish, click "Finish".