Hej
Jag försöker få igång min Dm500HD (enigma2) med ComHem. Jag kör NewCS 1.67 och mgcamd 1.35a men får inte nån bild för de kodade kanalerna från ComHem. Vad gör jag för fel? (newbie på dreambox)
NewCS verkar starta up ok (se nedan) och hittar comhem kortet. När jag kör igång mgcamd och väljer kodad kanal så får jag följande meddelande:
Kod:[ 22:21:32 ] [ Newcamd:16000 ] User dummy logged in, client: Mgcamd [ 22:21:33 ] [ Newcamd ] ECM -> dummy (OK) [CAID 0B00] [Prov 00000000] [SID 0410]newcs.xmlKod:This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team.. Compiled on Jul 14 2009 at 11:56:53 Reading Config file from /var/tuxbox/config/newcs.xml TCP-log password is enabled, set to: NewCSpwd TCP-log set to simple mode level: normal type: init output: console,tcp logger config: level 1 type 3 output 5 Console log options: level 1 type 3 TCP log options: level 1 type 3 [ 21:59:51 ] [ Box detect ] Box type 7 (Dream Multimedia (MIPS) HD Box) [ 21:59:51 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO [ 21:59:51 ] [ Config ] Value in <ipk> for device 0 (lower) is INVALID, skipping... [ 21:59:51 ] [ Config ] Value in <ucpk> for device 0 (lower) is INVALID, skipping... [ 21:59:51 ] [ Config ] Pincode for device 0 (lower): 0000 [ 21:59:51 ] [ Config ] /dev/sci0 ECM priority: round [ 21:59:51 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin [ 21:59:51 ] [ EMM Cache ] Initialising dynamic Cache [ 21:59:51 ] [ ECM Cache ] Initialising dynamic Cache [ NewCS ] Process ID is: 757 [ 21:59:51 ] [ Loader ] Starting Telnet on port 1001 [ 21:59:51 ] [ Loader ] Started HTTP-server on port: 8080 [ 21:59:51 ] [ Loader ] Reader type 5 on node /dev/sci0 [ 21:59:51 ] [ Sci ] Closing device /dev/sci0 [Handle=-1] [ 21:59:51 ] [ Sci ] Opening device /dev/sci0 SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS [ 21:59:51 ] [ Sci ] resetting card now [ 21:59:51 ] [ Sci ] Reset [ 21:59:52 ] [ Sci ] Card reset [ 21:59:54 ] [ ATR ] T=0 1etu=64.00us Guardtime:12etu WWT:76800etu [ 21:59:54 ] [ ATR ] Historical bytes: 0 B 0 0 [ 21:59:54 ] [ Loader ] Init Conax card [ 21:59:54 ] [ KeymaN ] Adding key 000000xxxxxxxx type 0 on Provider 000000 for caid 0B00 ID=0 [ 21:59:54 ] [ KeymaN ] Adding key 00000000xxxxxx type 1 on Provider 000000 for caid 0B00 ID=0 [ 21:59:54 ] [ Loader ] Card 0B00 on port /dev/sci0 ready [ 21:59:54 ] [ Loader ] Starting Newcamd Server on port 16000 [ 21:59:54 ] [ NewCS ] Ready to GO! :) [ 21:59:54 ] [ Newcamd ] Newcamd thread Server started on port 16000 newcamd: main loop [ 21:59:54 ] [ Newcamd ] recv: error! 146: Connection refused [ 21:59:54 ] [ Newcamd:16000 ] User dummy logout
Kod:<?xml version="1.0"?> <!-- For setup-issues, look in readme.txt! If there are other troubles, try different forums or irc channels around :o) The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf. ** This is the example file for Dreambox/TD etc. that use SCI interfaces. --> <newCSconfig> <readers name="Card Readers"> <device> <name>lower</name> <type>sci</type> <mhz>500</mhz> <node>/dev/sci0</node> <parity>odd</parity> <reset>normal</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <!-- <boxkey>0000000000</boxkey> --> <!-- <rsa>0000000000</rsa> --> <irdeto-camkey>0000000000000000</irdeto-camkey> <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> <crypto-special>No</crypto-special> <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>16000</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> </device> <!-- <device> --> <name>upper</name> <type>sci</type> <mhz>500</mhz> <node>/dev/sci1</node> <parity>odd</parity> <reset>normal</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <!-- <boxkey>0000000000</boxkey> --> <!-- <rsa>0000000000</rsa> --> <irdeto-camkey>0000000000000000</irdeto-camkey> <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> <crypto-special>No</crypto-special> <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>34001</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> <!-- </device> --> <device> <name>smargo</name> <type>phoenix</type> <mhz>600</mhz> <parity>none</parity> <node>/dev/usb/ttyUSB0</node> <export>Yes</export> <enabled>No</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>Yes</blockga> <blockc0>No</blockc0> <boxkey>00000000</boxkey> <crypto-special>No</crypto-special> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>34002</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> <sid> <allow> </allow> <deny> <id></id> </deny> </sid> </device> </readers> <radegastserver> <enabled>No</enabled> <port>16000</port> <allow> <hostname>localhost</hostname> </allow> </radegastserver> <cache> <emm>20</emm> <ecm>-1</ecm> </cache> <httpd> <server> <!-- Port to accept connections on --> <port>8080</port> <enabled>yes</enabled> </server> <user> <!-- valid value for userfile are: Any username you'd like - Used for browser to logon (its case sensitive). --> <name>newcs</name> <!-- valid value for password are: Any password you'd like - Used for browser to logon (its case sensitive). --> <password>newcs</password> <!-- valid value for accesslevel are: admin, stats - Define what rights the user has in the web-console --> <accesslevel>admin</accesslevel> </user> </httpd> <debug> <password>NewCSpwd</password> <level>normal</level> <type>init</type> <output>console,tcp</output> <console_options>normal,init</console_options> <tcp_port>1001</tcp_port> <tcp_options>normal,init</tcp_options> </debug> <newcamdserver> <enabled>Yes</enabled> <name>newcs</name> <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey> <user> <name>dummy</name> <password>dummy</password> <hostname>localhost</hostname> <port>16000</port> <au>on</au> <sidoverride>off</sidoverride> <spider>No</spider> <rate>2</rate> </user> <user> <name>mpcs</name> <password>dummy</password> <au>No</au> <spider>No</spider> <sidoverride>No</sidoverride> <readers> <allow>lower</allow> <allow>smargo</allow> </readers> <rate>0</rate> </user> </newcamdserver> </newCSconfig>
newcamd.list
Kod:CWS = localhost 16000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Svara med citat
