mami
2005-08-10, 16:08
Hej.
Har försökt göra en liten howto på min htpc.
Denna är inte helt komplett men kanske nån kan hjälpa till å få den slutförd.
Kan finnas fel i den ??
Å stavfel kan förekomma men ni behöver inte göra enhel tråd med dem, bara ni fattar vad som menas. :P
Howto install debian +vdr +plugins for Nexus-s card +remote.
----------------------------------------------------------------------------------------
Debian install + compile kernel + add some apps.
----------------------------------------------------------------------------------------
Install Debian on pc.
Download debian from www.debian.org
Update to debian unstable (sarge)
apt-setup (and change to sarge!)
or
joe /etc/apt/sources.list (change all stable to unstable)
and
apt-get update
apt-get dist-upgrade
add fellowing packets: (whit apt-get install <package>)
joe
ssh
wget
tar ?
bzip2 ?
...
Download newest 2.6 kernel from kernel.org to /usr/src (must be newer than 2.6.11)
cd /usr/src
wget <file name>
Install make + libncurses5-dev + hotplug + ??? (whit apt-get install <package>)
Compile kernel:
tar -jxvf linux-<version>.tar.bz2
ln -s linux-<version> linux
cd linux
make menuconfig
----------------------------------------------------------------------------------
< add what you need for you're pc > + the fellowing:
Prompt for development and/or incomplete code/drivers ¦ ¦
¦ ¦ Select only drivers expected to compile cleanly ¦ ¦
¦ ¦ [ ] Select only drivers that don't need compile-time external firmware
General Setup
Support for hot-pluggable devices
Loadable module support
Module unloading
Processor type
Pick you processor type
Bus options
PCI Support
PCI Device name database
Device drivers
Generic Driver Options
Hot plug firmware loading support
--- Mouse interface ¦ ¦
¦ ¦ Provide legacy /dev/psaux device ¦ ¦
¦ ¦ (1024) Horizontal screen resolution ¦ ¦
¦ ¦ (768) Vertical screen resolution ¦ ¦
¦ ¦ < > Joystick interface ¦ ¦
¦ ¦ < > Touchscreen interface ¦ ¦
¦ ¦ <*> Event interface ¦ ¦
¦ ¦ < > Event debugging
--- I2C support ¦ ¦
¦ ¦ <*> I2C device interface ¦ ¦
¦ ¦ I2C Algorithms ---> ¦ ¦
¦ ¦ I2C Hardware Bus support ---> ¦ ¦
¦ ¦ Hardware Sensors Chip support ---> ¦ ¦
¦ ¦ Other I2C Chip support ---> ¦ ¦
¦ ¦ [ ] I2C Core debugging messages ¦ ¦
¦ ¦ [ ] I2C Algorithm debugging messages ¦ ¦
¦ ¦ [ ] I2C Bus debugging messages ¦ ¦
¦ ¦ [ ] I2C Chip debugging messages
<*> I2C bit-banging interfaces ¦ ¦
¦ ¦ < > I2C PCF 8584 interfaces
DVB For Linux ¦ ¦
¦ ¦ <*> DVB Core Support ¦ ¦
¦ ¦ --- Misc. Frontend Modules ¦ ¦
¦ ¦ --- DVB-S (satellite) frontends ¦ ¦
¦ ¦ <*> ST STV0299 based ¦ ¦
¦ ¦ < > Connexant CX24110 based ¦ ¦
¦ ¦ < > Grundig 29504-491 based ¦ ¦
¦ ¦ < > Zarlink MT312 based ¦ ¦
¦ ¦ < > VLSI VES1893 or VES1993 based
--- Supported SAA7146 based PCI Adapters ¦ ¦
¦ ¦ <*> AV7110 cards ¦ ¦
¦ ¦ Compile AV7110 firmware into the driver ¦ ¦
¦ ¦ (/usr/lib/hotplug/firmware/dvb-ttpci-01.fw) Full pathname of av7110 firmware file ¦ ¦
¦ ¦ AV7110 OSD support ¦ ¦
¦ ¦ < > Budget cards ¦ ¦
¦ ¦ < > Budget cards with onboard CI connector ¦ ¦
¦ ¦ < > Budget cards with analog video inputs
/proc file system support ¦ ¦
¦ ¦ [ ] /dev file system support (OBSOLETE) ¦ ¦
¦ ¦ [ ] /dev/pts Extended Attributes
-----------------------------------------------------------------------------------
done?? = exit and save.... (maby something i miss??? then just add and recompile)
------------------------------------------------------------------------------------
make
make modules_install
cp arch/i386/boot/bzImage /boot/kernel-<version>
joe /etc/lilo.conf
--------------------------
default=Linux
image=/boot/kernel-<version>
label=Linux
read-only
image=/vmlinuz
label=Safe
read-only
# restricted
# alias=1
---------------------------
save...
---------------------------
lilo (no errors)
reboot
----------------------------------------------------------
Now u shall have a working new kernel!!!
Not? Boot to Safe and add the missing + recompile kernel.
----------------------------------------------------------
<login>
cd /usr/src
wget http://207.44.152.197/dvb-ttpci-01.fw.bz2 <-- patched for use whit vdr + sc later!!
tar -jxvf dvb-ttpci-01.fw.bz2
cp dvb-ttpci-01.fw /lib/firmware (creat map if not there! or missing some in kernel/hotplug!!)
modprobe dvb-ttpci (no errors i hope!)
lsmod
---------------------------------------------------
shall show something like this: (dvb-ttpci = card working now!)
Module Size Used by
ipv6 207552 10
lirc_dev 11748 0
parport_pc 21956 0
parport 19648 1 parport_pc
dvb_ttpci 91432 22
dvb_core 72232 1 dvb_ttpci
l64781 6788 1 dvb_ttpci
saa7146_vv 45440 2 dvb_ttpci
video_buf 16644 1 saa7146_vv
saa7146 14600 2 dvb_ttpci,saa7146_vv
v4l1_compat 13956 1 saa7146_vv
v4l2_common 4864 1 saa7146_vv
videodev 7040 2 saa7146_vv
ves1820 5380 1 dvb_ttpci
stv0299 10504 1 dvb_ttpci
tda8083 5636 1 dvb_ttpci
stv0297 8320 1 dvb_ttpci
sp8870 6924 1 dvb_ttpci
ves1x93 6276 1 dvb_ttpci
ttpci_eeprom 2432 1 dvb_ttpci
af_packet 12552 2
-------------------------------------------------
joe /etc/modules (add dvb-ttpci to a new line for working card when startup!)
reboot and lsmod to see if ok!!
SYSTEM = OK!
------------------------------------------------------------------------------------
VDR Install:
------------------------------------------------------------------------------------
cd /usr/src
Download dvb driver
wget ftp://ftp.cadsoft.de/vdr/linux-dvb.2003-11-08.tar.bz2
tar -jxvf linux-dvb.2003-11-08.tar.bz2
ln -s DVB
cd DVB
ln -s /usr/src/linux/include include
cd ..
Download vdr
wget ftp://ftp.cadsoft.de/vdr/Developer/vdr-<version>.tar.bz2 (1.3.x)
tar -jxvf vdr-<version>.tar.bz2
cd vdr-<version>
joe Makefile
edit too:
DVBDIR = ../DVB
LSIDIR = ./libsi
MANDIR = /usr/share/man
BINDIR = /usr/local/bin
LIBS = -ljpeg -lpthread -ldl
INCLUDES = /usr/include
apt-get install gcc
apt-get install libjpeg62-dev (i hope it was this one!)
make
make plugins <options>
mkdir /etc/vdr
mkdir /usr/lib/vdr
mkdir /video
cp vdr /usr/bin
cp *.conf /etc/vdr
cp PLUGINS/lib/* /usr/lib/vdr
Make channels.conf before start
cd /usr/src/DVB/apps/scan (if you dont have this search the net!!)
joe dvb-s/<Satelit you want to have or creat new>
add to this file: freq pol sr fec
ex: S 12054000 V 27500000 3/4
./scan -o vdr -e 3 dvb-s/<satelit> > channels.conf
cp channels.conf /etc/vdr/
Start VDR
vdr -c/etc/vdr -L/usr/lib/vdr -w900 -P<plugin name if some>
----------------------------------------------------------------------
Now is you're vdr working! If you have edited *.conf in /etc/vdr!!
----------------------------------------------------------------------
Want to see in pc monitor?
apt-get install fbtv
fbtv -q -t10 (error? some missing in kernel (framebuffer/event interface)
Start vdr whit:
vdr -c/etc/vdr -L/usr/lib/vdr -t/dev/tty10 -w900 -P<plugin name if some>
--------------------------
Add plugins:
--------------------------
For plugin errors try fellowing:
make clean
make plugins-clean
<start over>
Remote (for nexus remote)
cd /usr/src/vdr-<version>/PLUGINS/src
wget http://escape-edv.de/endriss/vdr/vdr-remote-<version>.tgz
tar -zxvf vdr-remote-<version>.tgz
ln -s vdr-remote-<version> remote
cd /usr/src/vdr-<version>
make clean
make
make plugins
cp PLUGINS/lib/libvdr-remote.so.<vdr-version> /usr/lib/vdr/
rm /etc/vdr/remote.conf
< start vdr and add -Premote to startup and hold down a button until vdr find the remote >
Kvar:
Göra ett startup script som startar vdr + fbtv när man sätter igång den å ett shutdown script till vdr power off.
Fattas hur man sätter in:
SC (softcam, cardsharing)
ttxtsubs (subtitles som används för viasat + cd)
Bra sida om vdr och hur man sätter in plugins + vart man hittar dem.
http://www.linuxtv.org/vdrwiki/
Är det nåt ni vet är fel i denna så säg till.
Jag vet inget nu men man kan inte se allt. :wink:
Tack för mig.
/Mami
Har försökt göra en liten howto på min htpc.
Denna är inte helt komplett men kanske nån kan hjälpa till å få den slutförd.
Kan finnas fel i den ??
Å stavfel kan förekomma men ni behöver inte göra enhel tråd med dem, bara ni fattar vad som menas. :P
Howto install debian +vdr +plugins for Nexus-s card +remote.
----------------------------------------------------------------------------------------
Debian install + compile kernel + add some apps.
----------------------------------------------------------------------------------------
Install Debian on pc.
Download debian from www.debian.org
Update to debian unstable (sarge)
apt-setup (and change to sarge!)
or
joe /etc/apt/sources.list (change all stable to unstable)
and
apt-get update
apt-get dist-upgrade
add fellowing packets: (whit apt-get install <package>)
joe
ssh
wget
tar ?
bzip2 ?
...
Download newest 2.6 kernel from kernel.org to /usr/src (must be newer than 2.6.11)
cd /usr/src
wget <file name>
Install make + libncurses5-dev + hotplug + ??? (whit apt-get install <package>)
Compile kernel:
tar -jxvf linux-<version>.tar.bz2
ln -s linux-<version> linux
cd linux
make menuconfig
----------------------------------------------------------------------------------
< add what you need for you're pc > + the fellowing:
Prompt for development and/or incomplete code/drivers ¦ ¦
¦ ¦ Select only drivers expected to compile cleanly ¦ ¦
¦ ¦ [ ] Select only drivers that don't need compile-time external firmware
General Setup
Support for hot-pluggable devices
Loadable module support
Module unloading
Processor type
Pick you processor type
Bus options
PCI Support
PCI Device name database
Device drivers
Generic Driver Options
Hot plug firmware loading support
--- Mouse interface ¦ ¦
¦ ¦ Provide legacy /dev/psaux device ¦ ¦
¦ ¦ (1024) Horizontal screen resolution ¦ ¦
¦ ¦ (768) Vertical screen resolution ¦ ¦
¦ ¦ < > Joystick interface ¦ ¦
¦ ¦ < > Touchscreen interface ¦ ¦
¦ ¦ <*> Event interface ¦ ¦
¦ ¦ < > Event debugging
--- I2C support ¦ ¦
¦ ¦ <*> I2C device interface ¦ ¦
¦ ¦ I2C Algorithms ---> ¦ ¦
¦ ¦ I2C Hardware Bus support ---> ¦ ¦
¦ ¦ Hardware Sensors Chip support ---> ¦ ¦
¦ ¦ Other I2C Chip support ---> ¦ ¦
¦ ¦ [ ] I2C Core debugging messages ¦ ¦
¦ ¦ [ ] I2C Algorithm debugging messages ¦ ¦
¦ ¦ [ ] I2C Bus debugging messages ¦ ¦
¦ ¦ [ ] I2C Chip debugging messages
<*> I2C bit-banging interfaces ¦ ¦
¦ ¦ < > I2C PCF 8584 interfaces
DVB For Linux ¦ ¦
¦ ¦ <*> DVB Core Support ¦ ¦
¦ ¦ --- Misc. Frontend Modules ¦ ¦
¦ ¦ --- DVB-S (satellite) frontends ¦ ¦
¦ ¦ <*> ST STV0299 based ¦ ¦
¦ ¦ < > Connexant CX24110 based ¦ ¦
¦ ¦ < > Grundig 29504-491 based ¦ ¦
¦ ¦ < > Zarlink MT312 based ¦ ¦
¦ ¦ < > VLSI VES1893 or VES1993 based
--- Supported SAA7146 based PCI Adapters ¦ ¦
¦ ¦ <*> AV7110 cards ¦ ¦
¦ ¦ Compile AV7110 firmware into the driver ¦ ¦
¦ ¦ (/usr/lib/hotplug/firmware/dvb-ttpci-01.fw) Full pathname of av7110 firmware file ¦ ¦
¦ ¦ AV7110 OSD support ¦ ¦
¦ ¦ < > Budget cards ¦ ¦
¦ ¦ < > Budget cards with onboard CI connector ¦ ¦
¦ ¦ < > Budget cards with analog video inputs
/proc file system support ¦ ¦
¦ ¦ [ ] /dev file system support (OBSOLETE) ¦ ¦
¦ ¦ [ ] /dev/pts Extended Attributes
-----------------------------------------------------------------------------------
done?? = exit and save.... (maby something i miss??? then just add and recompile)
------------------------------------------------------------------------------------
make
make modules_install
cp arch/i386/boot/bzImage /boot/kernel-<version>
joe /etc/lilo.conf
--------------------------
default=Linux
image=/boot/kernel-<version>
label=Linux
read-only
image=/vmlinuz
label=Safe
read-only
# restricted
# alias=1
---------------------------
save...
---------------------------
lilo (no errors)
reboot
----------------------------------------------------------
Now u shall have a working new kernel!!!
Not? Boot to Safe and add the missing + recompile kernel.
----------------------------------------------------------
<login>
cd /usr/src
wget http://207.44.152.197/dvb-ttpci-01.fw.bz2 <-- patched for use whit vdr + sc later!!
tar -jxvf dvb-ttpci-01.fw.bz2
cp dvb-ttpci-01.fw /lib/firmware (creat map if not there! or missing some in kernel/hotplug!!)
modprobe dvb-ttpci (no errors i hope!)
lsmod
---------------------------------------------------
shall show something like this: (dvb-ttpci = card working now!)
Module Size Used by
ipv6 207552 10
lirc_dev 11748 0
parport_pc 21956 0
parport 19648 1 parport_pc
dvb_ttpci 91432 22
dvb_core 72232 1 dvb_ttpci
l64781 6788 1 dvb_ttpci
saa7146_vv 45440 2 dvb_ttpci
video_buf 16644 1 saa7146_vv
saa7146 14600 2 dvb_ttpci,saa7146_vv
v4l1_compat 13956 1 saa7146_vv
v4l2_common 4864 1 saa7146_vv
videodev 7040 2 saa7146_vv
ves1820 5380 1 dvb_ttpci
stv0299 10504 1 dvb_ttpci
tda8083 5636 1 dvb_ttpci
stv0297 8320 1 dvb_ttpci
sp8870 6924 1 dvb_ttpci
ves1x93 6276 1 dvb_ttpci
ttpci_eeprom 2432 1 dvb_ttpci
af_packet 12552 2
-------------------------------------------------
joe /etc/modules (add dvb-ttpci to a new line for working card when startup!)
reboot and lsmod to see if ok!!
SYSTEM = OK!
------------------------------------------------------------------------------------
VDR Install:
------------------------------------------------------------------------------------
cd /usr/src
Download dvb driver
wget ftp://ftp.cadsoft.de/vdr/linux-dvb.2003-11-08.tar.bz2
tar -jxvf linux-dvb.2003-11-08.tar.bz2
ln -s DVB
cd DVB
ln -s /usr/src/linux/include include
cd ..
Download vdr
wget ftp://ftp.cadsoft.de/vdr/Developer/vdr-<version>.tar.bz2 (1.3.x)
tar -jxvf vdr-<version>.tar.bz2
cd vdr-<version>
joe Makefile
edit too:
DVBDIR = ../DVB
LSIDIR = ./libsi
MANDIR = /usr/share/man
BINDIR = /usr/local/bin
LIBS = -ljpeg -lpthread -ldl
INCLUDES = /usr/include
apt-get install gcc
apt-get install libjpeg62-dev (i hope it was this one!)
make
make plugins <options>
mkdir /etc/vdr
mkdir /usr/lib/vdr
mkdir /video
cp vdr /usr/bin
cp *.conf /etc/vdr
cp PLUGINS/lib/* /usr/lib/vdr
Make channels.conf before start
cd /usr/src/DVB/apps/scan (if you dont have this search the net!!)
joe dvb-s/<Satelit you want to have or creat new>
add to this file: freq pol sr fec
ex: S 12054000 V 27500000 3/4
./scan -o vdr -e 3 dvb-s/<satelit> > channels.conf
cp channels.conf /etc/vdr/
Start VDR
vdr -c/etc/vdr -L/usr/lib/vdr -w900 -P<plugin name if some>
----------------------------------------------------------------------
Now is you're vdr working! If you have edited *.conf in /etc/vdr!!
----------------------------------------------------------------------
Want to see in pc monitor?
apt-get install fbtv
fbtv -q -t10 (error? some missing in kernel (framebuffer/event interface)
Start vdr whit:
vdr -c/etc/vdr -L/usr/lib/vdr -t/dev/tty10 -w900 -P<plugin name if some>
--------------------------
Add plugins:
--------------------------
For plugin errors try fellowing:
make clean
make plugins-clean
<start over>
Remote (for nexus remote)
cd /usr/src/vdr-<version>/PLUGINS/src
wget http://escape-edv.de/endriss/vdr/vdr-remote-<version>.tgz
tar -zxvf vdr-remote-<version>.tgz
ln -s vdr-remote-<version> remote
cd /usr/src/vdr-<version>
make clean
make
make plugins
cp PLUGINS/lib/libvdr-remote.so.<vdr-version> /usr/lib/vdr/
rm /etc/vdr/remote.conf
< start vdr and add -Premote to startup and hold down a button until vdr find the remote >
Kvar:
Göra ett startup script som startar vdr + fbtv när man sätter igång den å ett shutdown script till vdr power off.
Fattas hur man sätter in:
SC (softcam, cardsharing)
ttxtsubs (subtitles som används för viasat + cd)
Bra sida om vdr och hur man sätter in plugins + vart man hittar dem.
http://www.linuxtv.org/vdrwiki/
Är det nåt ni vet är fel i denna så säg till.
Jag vet inget nu men man kan inte se allt. :wink:
Tack för mig.
/Mami