DK Boxer & alexcs

[trikker]

hello guys

I have been fighting with this new alexcs2 and my boxer card on internal network.
SETUP:
DB500 with newcamd and Boxer card.
TV with Boxer CAM (MPEG4) and alexcs

cardserv.conf file :
DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER_NAME = cardserver
DEBUG_PORT = 14000
ENTITLEMENT_PORT = 14001
ADMIN_PORT = 14002
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
USER = local local lan 127.0.0.1 12000 au
USER = spider spider lan 127.0.0.1 15003
DEBUG_INIT = no
DEBUG_NET = no
DEBUG_ECM = no
DEBUG_EMM = no
SERIAL_PORT = 0
TCP_PORT = 10000
SERIAL_PORT = 1
TCP_PORT = 10001
BOXID = 0000000000

In alex webpage status says connected. It is set to Viaccess.
On tv it says "You don't have right to decode HE-AAC audio" and there is no picture.

Boxer CAM works with boxer card in.
I have trie to change BOXID to the 6 digit number on CAM, but it is the same.

What am I missing?
Maybe ATR...?

[mikaelk]

First add a user for the Alex client (should always be set to au).
USER = alex1 alex_pw au

Also add the following line to allow for longer login time:
CLIENT_CONNECT_TIMEOUT = 50

Assuming you have the Boxer card in serial port 0 you will have Alex connecting to port 10000. BOXID is not needed.

So in Alex you set the server IP and port (10000), use "alex1" as Login and "alex_pw" as Password.
Also check the Extend SC Timeout checkbox.
No change of ATR needed.

Restart Alex and TV.

If still not working post logs from server.

[trikker]

Thank you for your help, but it did no change for me. Its the same text on the TV.
Where can I look for the logs on the dreambox? What directory, I cant find any thing...

[mikaelk]

Also check that the interface card is competely inserted in the card slot. In some cases you might have to cut the corners of the board a little bit.

[trikker]

Hmm... If i take it out, the tv says "no access". And if i insert the interface again, the tv says again "you dont have right to decode audio".
So i do think it is insertet correct.
Also through the TV's CI-menu i can access the menu on the alex2 interface.
I tried to telnet into the debug port 14000 but nothing happens....

Any other ideas?