mdredfox8
2004-05-13, 12:33
ViaAllZ2 - English instruction
The Instruction.
" Reset card " is the button to connect to your card.
Before pressing this button you should choose COM-port which you are using.
You should use Phoenix/Smartmouse 3.57MHz programmator. If you are using USB-type programmator you may face problems.
Let's look for a result within NTV + card.
This software allows to work with old cards (Via1) and with new ones (Via2.)
We will not describe work with old cards, and let's talk about new one (Ident: 01 A4 00). ATR of this card is: 3F 77 18 25 00 80 14 00 66 68 90 00... New (!) cards with ident: 020700 cannot be modified!
It is a little about an infrastructure of a card. Cards for today look approximately so: ATR: 3F 77 18 25 00 80 14 00 66 68 90 00
CARD NUMER: 324667OOOO
UA NUMER: 00 C1 84 XX XX
CARD ID:
FF F5 00
01 A4 00
ID FFF500
NOT ACTIV
Uses KEYs: 02 03
Pr. NAME: HTB +
SA NUMER: C1 84 XX XX
GEO CODE: No info
Class Subscriptions
- No info -
ID 01A400
ACTIV
Uses KEYs: 00 01 04 08
Pr. NAME: HTB +
SA NUMER: C1 84 XX XX
GEO CODE: 4E 54 56 2B
Class Subscriptions
FROM 29 feb. 2004 TO 31 mar. 2004 CLASS 60
FROM 29 feb. 2004 TO 31 mar. 2004 CLASS 3
It is a little ABC-book:
The master keys (00 - 07) of an issuer used to add new ident and keys as to themselves and the provider.
The master keys (00 - 07) the provider enable used to add new provider keys, label, geocode, subscription (date, a class, a theme i.t.d).
Question: I want to modify my card with what do I have to do?
At the beginning we should receive the control over a card and to be more exactly control of an issuer.
For this purpose we should change MK07 (8 bytes) with a zero value, i.e. MK07 = 00 00 00 00 00 00 00 00.
Then, having MK07 of an issuer, we changing MK07 (or 06 as you want) for the provider.
The detailed description of steps:
Step 1 (changing MK07 of an issuer to zeros).
Card in programmator, mode Phoenix (3.57MHz)
Start ViaAllZ2, then choose COM-port.
Then press the button " Reset card " and wait till the card will be subtracted completely.
After extraction go to bookmark "C-66H."
In this bookmark " the basic functions " value of a key we do not touch (by default should be 00 00 00 00 00 00 00 00) and then we press the button "Change."
If the answer "ok" an issuer have changed MK07.
It is the most important stage.
If here there was a mistake next steps will not be completed!
It is necessary to understand have been made.
Step 2 (Change MK07 of the provider).
Now it is necessary to change MK07 to zeros of the provider, for an opportunity to modify a card.
We pass in a bookmark of "Meanings."
At the left in the list of an idents we choose the provider, in our example 01 A4 00.
The provider should be highlited by dark-blue strip.
In a field " Working key " in the dropping out list choose an issuer FF F5 00, then mark key (7) and enter value of the 7th key (by default should be 00 00 00 00 00 00 00 00).
In a bookmark " Subscription and keys " in a field "Key" choose "07"
Then choose length of a key S08).
Then enter value of a key which we want to register opposite S08 (by default should be 00 00 00 00 00 00 00 00).
Then press the button " Change key ". The program will throw out the prevention about danger before pressing "Yes", be convinced, what you did not made any mistakes.
Then press "Yes." If the answer is "ok", provider has changed MK07.
Similarly it is possible to change any keys in the provider (and issuer) as 8 and 16 bytes.
The order of next steps has no value.
Step 3 (Subscription.)
Now it is necessary change a subscription.
In the list of idents (at left) choose the provider, in our example 01 A4 00.
The provider will be highlighted with a dark-blue strip.
In a field " Working key " in the dropping list chose ident 01 A4 00, we mark the number of a key (7) and enter value of the 7th key (by default it should be 00 00 00 00 00 00 00 00).
In a bookmark " Subscription and keys " choose initial date (for example 01.05.2004) and the final date (for example 31.12.2004). Then choose all classes. " Quantity of a groups should be 8 classes " 32.
Then press the button " Add a subscription ". If the answer is "ok" subscription was added.
Step 4 (Pincode and presence of keys in the card).
Function " Extract keys " in a bookmark " Keys and pin " is interesting for old Via1 cards. For the Via2 cards
keys can be extracted only coded.
But in this function it is possible to see which keys are present in a card for that provider.
Function " Reset pin " speaks for itself and does not demand an explanation.
Step 5 (Changing OP-keys (16 bytes) in a card).
We pass in a bookmark of "Means."
Choose in the list idents (at left) the provider, in our example 01 A4 00.
The provider will be highlighted with a dark-blue strip.
For changing the keys it is possible to use MK of an issuer (MK07 for example) or the provider (MK07 for example).
In a field " Working key " in the dropping list choose an issuer FF F5 00 or the provider 01 A4 00, mark the number of a key (7) and enter value of a 7th key (by default it should be 00 00 00 00 00 00 00 00).
In a bookmark " Subscription and keys " in a field "Key" you can change necessary key.
Be cautious, do not change 08 key!
Choose the length of a key (S16.)
Enter value of a new key which you want to change.
Press the button " Change key ". The program will throw out the prevention. Before pressing "yes", be sure that yo a did not any mistakes.
Then press "Yes." If the answer is "Ok" your card has changed key.
This procedure is similar for each key you whan to chage.
Thanks to the author of this program (StasZ2) to the guy who had wrote this instruction (Kamen987) and for me of course (kol2000) who had translated this text
The Instruction.
" Reset card " is the button to connect to your card.
Before pressing this button you should choose COM-port which you are using.
You should use Phoenix/Smartmouse 3.57MHz programmator. If you are using USB-type programmator you may face problems.
Let's look for a result within NTV + card.
This software allows to work with old cards (Via1) and with new ones (Via2.)
We will not describe work with old cards, and let's talk about new one (Ident: 01 A4 00). ATR of this card is: 3F 77 18 25 00 80 14 00 66 68 90 00... New (!) cards with ident: 020700 cannot be modified!
It is a little about an infrastructure of a card. Cards for today look approximately so: ATR: 3F 77 18 25 00 80 14 00 66 68 90 00
CARD NUMER: 324667OOOO
UA NUMER: 00 C1 84 XX XX
CARD ID:
FF F5 00
01 A4 00
ID FFF500
NOT ACTIV
Uses KEYs: 02 03
Pr. NAME: HTB +
SA NUMER: C1 84 XX XX
GEO CODE: No info
Class Subscriptions
- No info -
ID 01A400
ACTIV
Uses KEYs: 00 01 04 08
Pr. NAME: HTB +
SA NUMER: C1 84 XX XX
GEO CODE: 4E 54 56 2B
Class Subscriptions
FROM 29 feb. 2004 TO 31 mar. 2004 CLASS 60
FROM 29 feb. 2004 TO 31 mar. 2004 CLASS 3
It is a little ABC-book:
The master keys (00 - 07) of an issuer used to add new ident and keys as to themselves and the provider.
The master keys (00 - 07) the provider enable used to add new provider keys, label, geocode, subscription (date, a class, a theme i.t.d).
Question: I want to modify my card with what do I have to do?
At the beginning we should receive the control over a card and to be more exactly control of an issuer.
For this purpose we should change MK07 (8 bytes) with a zero value, i.e. MK07 = 00 00 00 00 00 00 00 00.
Then, having MK07 of an issuer, we changing MK07 (or 06 as you want) for the provider.
The detailed description of steps:
Step 1 (changing MK07 of an issuer to zeros).
Card in programmator, mode Phoenix (3.57MHz)
Start ViaAllZ2, then choose COM-port.
Then press the button " Reset card " and wait till the card will be subtracted completely.
After extraction go to bookmark "C-66H."
In this bookmark " the basic functions " value of a key we do not touch (by default should be 00 00 00 00 00 00 00 00) and then we press the button "Change."
If the answer "ok" an issuer have changed MK07.
It is the most important stage.
If here there was a mistake next steps will not be completed!
It is necessary to understand have been made.
Step 2 (Change MK07 of the provider).
Now it is necessary to change MK07 to zeros of the provider, for an opportunity to modify a card.
We pass in a bookmark of "Meanings."
At the left in the list of an idents we choose the provider, in our example 01 A4 00.
The provider should be highlited by dark-blue strip.
In a field " Working key " in the dropping out list choose an issuer FF F5 00, then mark key (7) and enter value of the 7th key (by default should be 00 00 00 00 00 00 00 00).
In a bookmark " Subscription and keys " in a field "Key" choose "07"
Then choose length of a key S08).
Then enter value of a key which we want to register opposite S08 (by default should be 00 00 00 00 00 00 00 00).
Then press the button " Change key ". The program will throw out the prevention about danger before pressing "Yes", be convinced, what you did not made any mistakes.
Then press "Yes." If the answer is "ok", provider has changed MK07.
Similarly it is possible to change any keys in the provider (and issuer) as 8 and 16 bytes.
The order of next steps has no value.
Step 3 (Subscription.)
Now it is necessary change a subscription.
In the list of idents (at left) choose the provider, in our example 01 A4 00.
The provider will be highlighted with a dark-blue strip.
In a field " Working key " in the dropping list chose ident 01 A4 00, we mark the number of a key (7) and enter value of the 7th key (by default it should be 00 00 00 00 00 00 00 00).
In a bookmark " Subscription and keys " choose initial date (for example 01.05.2004) and the final date (for example 31.12.2004). Then choose all classes. " Quantity of a groups should be 8 classes " 32.
Then press the button " Add a subscription ". If the answer is "ok" subscription was added.
Step 4 (Pincode and presence of keys in the card).
Function " Extract keys " in a bookmark " Keys and pin " is interesting for old Via1 cards. For the Via2 cards
keys can be extracted only coded.
But in this function it is possible to see which keys are present in a card for that provider.
Function " Reset pin " speaks for itself and does not demand an explanation.
Step 5 (Changing OP-keys (16 bytes) in a card).
We pass in a bookmark of "Means."
Choose in the list idents (at left) the provider, in our example 01 A4 00.
The provider will be highlighted with a dark-blue strip.
For changing the keys it is possible to use MK of an issuer (MK07 for example) or the provider (MK07 for example).
In a field " Working key " in the dropping list choose an issuer FF F5 00 or the provider 01 A4 00, mark the number of a key (7) and enter value of a 7th key (by default it should be 00 00 00 00 00 00 00 00).
In a bookmark " Subscription and keys " in a field "Key" you can change necessary key.
Be cautious, do not change 08 key!
Choose the length of a key (S16.)
Enter value of a new key which you want to change.
Press the button " Change key ". The program will throw out the prevention. Before pressing "yes", be sure that yo a did not any mistakes.
Then press "Yes." If the answer is "Ok" your card has changed key.
This procedure is similar for each key you whan to chage.
Thanks to the author of this program (StasZ2) to the guy who had wrote this instruction (Kamen987) and for me of course (kol2000) who had translated this text