Hej, jag behöver lite hjälp med att få igång news cs 1.67 på senaste unbutu och ad tekniks gula mp 3.6 läsare. Det går ej sätta den i phoenix mode, vad gör jag för galet?? Tacksam om någon kan hjälpa mig! Kan kasnke någon posta en config som fungerar med denna läsare:
http://www.adteknik.se/swedish/mp36usb.htm
Ibland står det med att firmware version is unkown när den ska sätta den i phoenix läge!
Min new cs.xml fil:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<listening-ip>192.168.1.2</listening-ip>
<certificate>/var/tuxbox/config/newcs.pem</certificate>
</globals>
<readers name="Standard Phoenix on PC">
<device>
<name>Phoenix on Com1</name>
<type>mp35</type>
<mhz>368</mhz>
<node>/dev/ttyUSB2</node>
<infinity_number>0</infinity_number>
<slot>0</slot>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camke-ydata>00000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000</ipk>
<ucpk>000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15050</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<id>0000</id><id>0001</id><id>0002</id>
</allow>
<deny>
<id>0000</id><id>0001</id><id>0002</id>
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>Yes</enabled>
<port>10001</port>
<allow>00
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>krimson</name>
<password>krimson</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>spam</level>
<type>init</type>
<output>console,tcp,file</output>
<console_options>normal,init</console_options>
<logfile>/etc/newcs.log</logfile>
<file_options>spam,all</file_options>
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options>normal,init</udp_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
</newCSconfig>
så här ser det ut när jag startar:
anders@anders-D2804-A1:~$ newcs.i686 -c/etc/newcs/newcs.xml
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:12:45
Reading Config file from /etc/newcs.xml
NewCS is trying to bind to IP: 192.168.1.2
TCP-log password is enabled, set to: NewCSpwd
level: spam
type: init
output: console,tcp,file
logger config: level 3 type 3 output 13
Console log options: level 1 type 3
log file: /etc/newcs.log
logger: cant open file /etc/newcs.log, file log disabled
TCP log options: level 1 type 3
[ 09:27:23 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 09:27:23 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 09:27:23 ] [ Config ] Value in <ipk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 09:27:23 ] [ Config ] Value in <ucpk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 09:27:23 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 09:27:23 ] [ Config ] /dev/ttyUSB2 ECM priority: round
[ 09:27:23 ] [ httpd ] httpd-user: krimson, password: krimson, accesslevel: admin
[ 09:27:23 ] [ EMM Cache ] Initialising dynamic Cache
[ 09:27:23 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 14556
[ 09:27:23 ] [ Loader ] Starting Telnet on port 1001
Can't create server: Address already in use
[ 09:27:23 ] bind: error! 13: Permission denied
[ 09:27:23 ] [ Loader ] Reader type 3 on node /dev/ttyUSB2
[ 09:27:23 ] [ Phoenix ] Opening device /dev/ttyUSB2
[ 09:27:23 ] [ MP35 ] Trying to set Mp3.5 to Phoenix mode on node /dev/ttyUSB2
[ 09:27:30 ] [ MP35 ] Looks like something went wrong, no answer or wrong answer from the mp3.5 - reseting..
[ 09:27:31 ] [ Loader ] Reset failed ...
[ 09:27:31 ] [ Loader ] Starting Newcamd Server on port 15050
[ 09:27:31 ] [ Loader ] Starting Radegast Server on port 10001
[ 09:27:31 ] [ NewCS ] Ready to GO!
[ 09:27:31 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 09:27:31 ] bind: error! 99: Cannot assign requested address
[ 09:27:31 ] bind: error! 98: Address already in use
mvh ad
Svara med citat
Ursprungligen postat av 2look4me
