Ingen Loading Samsung DSR9000

Kan någon säga vad som är fel ?



ODE_ON_SDRAM NOT fitted]

--- DEVELOP driver configuration ---
[UARTIO fitted]
[UNHOSTED fitted]
[STREPORT fitted]
[B_ON_THE_FLY fitted]
[ENABLE_AVSYNC fitted]
[DONT_BLOW_UP_HALF_SIZE_PICTURES NOT fitted]
[BUILT_FOR_16MBIT fitted]
[DECODE_ELEMENTARY_STREAM NOT fitted]
[SIF_UPSAMPLING_WORKAROUND NOT fitted]

Initialising PLL for version C or D chips - Fvco=216MHz
SDRAM interface has been correctly initia
i2c_init ok!
iic_init ok!
OnChip Size = 204
OnChip = 80000938
Flash init ..flash_init()

PTI driver library v3.0
Link I/F cut 2.x initialised for DVB
Setting up the link i/f interrupt
Clock recovery/PWM init
[PWM_REBASING FITTED]
[PWM_CONTROL_LARGER_VALUE_FASTER_CLOCK FITTED]
[PWM_INITIAL_VALUE: 0x79]
PCR init
EEPROM: initializing...
IRDSave_Init 1
----------------------------------------------------
NVRAM_LOADER_PAR 84, 54
NVRAM_CONFIG_PAR 64, 40
NVRAM_SPARE_BLOCK_SIZE 14734, 398e
----------------------------------------------------
NVRAM_CONFIG_PAR
You finished ir_init function without any problems
Initialized FRONT & IR handler!
front_ir_init()

IRD Configuration Init

MPEG SDRAM configuration :
Video Bit Buffer : Size= 500 Kbytes From 0xc0000000 to 0xc007cfff
Audio Bit Buffer : Size= 64 Kbytes From 0xc007d000 to 0xc008cfff
OSD Buffer : Size= 268 Kbytes From 0xc008d000 to 0xc00cffff
Frame Buffer A : Size= 608 Kbytes From 0xc00d0000 to 0xc0167fff
Frame Buffer B : Size= 608 Kbytes From 0xc0168000 to 0xc01fffff

First free address = 0xc0200000
Total SDRAM used = 2048 Kbytes
SDRAM not used by MPEG = 0 Kbytes

STi5500 Encoder configured in PAL BGDHI
Mpeg audio/video synchro process started
Mpeg live reset process started
Setting up the mpeg video interrupt
5500 initialised to parse PES streams
Setting up the mpeg audio interrupt
mpeg_init()
PIO exit Stand-by
PIO TV standard mode
PIO TV CVBS mode

Set TV 4:3 Composite mode
RF => PAL
Local_buffer[0] is 8A
Local_buffer[1] is 4C
Local_buffer[2] is 25
Local_buffer[3] is F4
Global Front I2C Reset
Tuner Init Start
Lsi 64724 sync byte ok!
LSI64724 init ok.
tuner mbox created.
tuner_init()
LSI Tuner Process Created
pol HOR
Change TR 0 = 950000 [KHz]
micro code download start...
micro code download complete!!
Enter Standby Status
PIO go Stand-by
PIO TV standard mode
PIO TV CVBS mode
TV standby
pol VER
lnb OFF
Init flash home channel
IRDSave_UpdateFLASH 40219518 100 7fe51f14
IRDSave_UpdateFLASH 40219618 270
Error-Main task-
IRDCfg_SetCurChannel empty fav 0
Error-Main task-
IRDCfg_SetCurChannel Invalid 0 1 1
IRDSave_Init 2
FLASH_SAT_PAR
FLASH_CHINFO_PAR
FLASH_FAV_PAR
713 audiopes.c> Initialising AUDIO PES Manager ...
823 audiopes.c> AUDIO PES Manager is created successfuly ...
AudioPesManagerInit()
gprim_init()
Background PAT process...
BGPAT FOUND SUITABLE BUFFER, tried 1 times
background_pat_init()
Background CAT process...
BGCAT FOUND SUITABLE BUFFER, tried 1 times
background_cat_init()
Background PMT process...
BGPMT FOUND SUITABLE BUFFER, tried 1 times
background_pmt_init()
smart card driver handler installation succeed
Smart detect handler installation succeed
smart card driver handler installation succeed
Smart detect handler installation succeed

Initialising Viaccess ...
Ok to create smart card process
TABLE VERSION PROCESS CREATE OK
rted...
table version monitor started !!!
table version monitor started !!!
table version monitor started !!!
table version monitor started !!!
sc status : 0 0

Viaccess version 100.v412 compiled on Aug 11 1999:18:04:31
VIACCESS init OK !!!
STEP1. CI_DATA: B7
STEP2. CI_DATA: A7
STEP3. CI_DATA: A7
ci_start()

Teletext driver library v1.0 - Version of Oct 05 2001 at 17:45:07
TELETEXT 1 FOUND SUITABLE BUFFER, tried 2 times
TELETEXT 2 FOUND SUITABLE BUFFER, tried 2 times
Creating 'Teletext VBI task' (priority=8)
The 'teletext_data_transfer' task is running
Creating 'Teletext STB Page Filter' task (priority=8)
The 'ttx_stb_page_filter' task is running
Creating 'Teletext Handler' task (priority=8)
'teletext_handler' task is running
IRDSave_Init 3
NVRAM_LOADER_PAR
FLASH_TIMER_PAR
FLASH_ADDTR_PAR
Extr start TDT...
DVB EIT structure size 584
max event is 2692
Extr start EIT...
Extr start EIT process...
TASK_init()
usif process created successfully
usif_init()
My_ch_change process: Started
OSD: Flag EITUpdateSetTDT FOUND SUITABLE BUFFER, tried 1 times
received EIT PID = 12 : 12 : 401c5db4
No errors during initialisation
EIT FOUND SUITABLE BUFFER, tried 1 times