VIASAT fungerar inte...

Utskriftsvy

2008-07-22, 14:51
Lasse_67

VIASAT fungerar inte...

Jag har installerat min dreambox med en image från Gemini och kanalerna från Thor fungerar bra, Canal Digital osv. Det jag inte får att fungera är Viasat kanalerna ex, TV1000. Jag får in texten men inget ljud och ingen bild, SGR 92%, AGC 78% och BER 0

Nedan har jag klippt in lite info från boxen (via Telnet)...
Jag skiftade mellan Canal Digital och TV1000, så man ser ju när det fungerar (Canal Digital) och när det inte fungerar (Viasat) ...

Hoppas att någon kan hjälpa mig med problemet!

**************************
* *
* The Gemini Project *
* *
**************************

OpenDreambox 4.4.0 dm600pvr

dm600pvr login: root
root@dm600pvr:~> ps -ef
PID Uid VmSize Stat Command
1 root 620 S init [2]
2 root SWN [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kthread]
13 root SW< [kblockd/0]
42 root SW [pdflush]
43 root SW [pdflush]
45 root SW< [aio/0]
44 root SW [kswapd0]
46 root SW [cifsoplockd]
47 root SW [cifsdnotifyd]
117 root SW [kseriod]
143 root SW [mtdblockd]
154 root SWN [jffs2_gcd_mtd3]
192 root SW< [fe_thread]
230 root 744 S udhcpc -b -p /var/run/udhcpc.eth0.pid
330 root 732 S /usr/sbin/dropbear -r /etc/dropbear/d
339 root 676 S /usr/sbin/inetd
477 root 1220 S /usr/bin/gSUB
529 root 2004 S /var/bin/2SUB
4149 root 2004 S /var/bin/2SUB
1026 root 680 S /bin/sh /usr/bin/enigma.sh
1129 root 944 S /usr/bin/gdaemon
1138 root 1220 S /usr/bin/gSUB
1141 root 12748 S /usr/bin/enigma
1142 root 12748 S N /usr/bin/enigma
1152 root 12748 S /usr/bin/enigma
1153 root 12748 S N /usr/bin/enigma
1162 root 12748 S /usr/bin/enigma
2354 root 12748 S N /usr/bin/enigma
1204 root 2000 S /var/bin/2SUB
4148 root 2000 S /var/bin/2SUB
4140 root 1476 S /var/bin/mgcamd_1.30
4141 root 1476 S /var/bin/mgcamd_1.30
4142 root 1476 S /var/bin/mgcamd_1.30
4145 root 1476 S /var/bin/mgcamd_1.30
4772 root 552 S telnetd
4773 nobody 1400 S vsftpd
4774 root 912 S -sh
4780 root 1520 S vsftpd
4781 nobody 1400 S vsftpd
4783 root 1472 S vsftpd
4910 root 552 S telnetd
4911 root 912 S -sh
4936 root 652 R sh -c wget -q http://www.dreamboxx.nu/e107_themes/...mages/link.png
4937 root 772 R wget -q http://www.dreamboxx.nu/e107_themes/...mages/link.png localhos
4938 root 804 R ps -ef
root@dm600pvr:~> killall -9 mgcamd_1.30
killall: Could not kill pid '4141': No such process
killall: Could not kill pid '4142': No such process
killall: Could not kill pid '4145': No such process
root@dm600pvr:~> cd /var/bin
root@dm600pvr:/usr/bin> mgcamd_1.30
tuxbox mgcamd v1.30c by mixvt (compiled Jun 10 2008 14:56:05)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:1 Dir:0 Osd:no:80:0
2.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dreambox
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = NAMN:XXXX.XXXX.org:13005 ser
[config] newcamd route = NAMN:XXXX.XXXX.org:13006 ser
newcamd keep alive: 300, incoming port: 21000
root@dm600pvr:/usr/bin> [mgcam] emm thread started
[mgcamd] tps update started.
[newcamd] Connecting to XXXX.XXXX.org:13005...
[newcamd] Connecting to XXXX.XXXX.org:13006...
[newcamd] Login to XXXX.XXXX.org:13005 as NAMN accept
[newcamd] Login to XXXX.XXXX.org:13006 as NAMN accept
[newcamd] Card data from XXXX.XXXX.org:13005 (82ms):
Userid 6 caid 0 providers 1
Idents: 000000

[newcamd] Card data from XXXX.XXXX.org:13006 (83ms):
Userid 6 caid B00 providers 1
Idents: 000000

got 8 cmd 9F
got 144 cmd 9F
[mg0] namespace 300000 t-id 5 on-id 56
[mg0] descramble on 1, source 1
[mg0] service C3A index 0 pmt pid C3A (2)
ECM: CaID: 0x090F -> CaPID: 0x0C42 ProvID: 000000
ECM: CaID: 0x093E -> CaPID: 0x0065 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0C42 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0065 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x090F -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
got 8 cmd 9F
[mg0] stoping camd..
got 72 cmd 9F
[mg0] namespace FFF80000 t-id 3 on-id 46
[mg0] descramble on 1, source 1
[mg0] service 12E index 0 pmt pid 101 (4)
ECM: CaID: 0x0B00 -> CaPID: 0x0021 ProvID: 000000
[mg0] No conax key(s) found for id 0 keynr 28
[mg0] -> ECM to newcamd XXXX.XXXX.org:13006
[mg0] <- CW from newcamd XXXX.XXXX.org:13006 (282ms)
[mg0] 282 msec -- Tue Jul 22 14:26:09 2008
===== Conax ECM on CaID 0x0B00, pid 0x0021 ======
prov: 000000
cw0:0 FB A0 62 FD 99 69 3F 41
cw1:0 BF F9 B5 6D 2F 1D DE 2A
[mgcamd] emm started
EMM: CaID: 0x0B00 -> CaPID: 0x0030 ProvID: 000000
[mgcamd] emm stopped
[mg0] -> ECM to newcamd XXXX.XXXX.org:13006
[mg0] <- CW from newcamd XXXX.XXXX.org:13006 (270ms)
[mg0] 270 msec -- Tue Jul 22 14:26:10 2008
===== Conax ECM on CaID 0x0B00, pid 0x0021 ======
prov: 000000
cw0:0 5B 6A 84 49 7C 4E 47 11
cw1:0 BF F9 B5 6D 2F 1D DE 2A
[mg0] -> ECM to newcamd XXXX.XXXX.org:13006
[mg0] <- CW from newcamd XXXX.XXXX.org:13006 (280ms)
[mg0] 280 msec -- Tue Jul 22 14:26:20 2008
===== Conax ECM on CaID 0x0B00, pid 0x0021 ======
prov: 000000
cw0:0 5B 6A 84 49 7C 4E 47 11
cw1:0 0F AC E1 9C C0 9A 4E A8
[mg0] -> ECM to newcamd XXXX.XXXX.org:13006
[mg0] <- CW from newcamd XXXX.XXXX.org:13006 (294ms)
[mg0] 294 msec -- Tue Jul 22 14:26:30 2008
===== Conax ECM on CaID 0x0B00, pid 0x0021 ======
prov: 000000
cw0:0 F6 E2 F7 CF 13 00 19 2C
cw1:0 0F AC E1 9C C0 9A 4E A8
[mg0] -> ECM to newcamd XXXX.XXXX.org:13006
[mg0] <- CW from newcamd XXXX.XXXX.org:13006 (439ms)
[mg0] 439 msec -- Tue Jul 22 14:26:40 2008
===== Conax ECM on CaID 0x0B00, pid 0x0021 ======
prov: 000000
cw0:0 F6 E2 F7 CF 13 00 19 2C
cw1:0 1A 53 35 A2 22 2A CB 17
[mg0] -> ECM to newcamd XXXX.XXXX.org:13006
[mg0] <- CW from newcamd XXXX.XXXX.org:13006 (274ms)
[mg0] 274 msec -- Tue Jul 22 14:26:51 2008
===== Conax ECM on CaID 0x0B00, pid 0x0021 ======
prov: 000000
cw0:0 81 77 3C 34 FF D6 2F 04
cw1:0 1A 53 35 A2 22 2A CB 17
[mg0] -> ECM to newcamd XXXX.XXXX.org:13006
[mg0] <- CW from newcamd XXXX.XXXX.org:13006 (272ms)
[mg0] 272 msec -- Tue Jul 22 14:27:01 2008
===== Conax ECM on CaID 0x0B00, pid 0x0021 ======
prov: 000000
cw0:0 81 77 3C 34 FF D6 2F 04
cw1:0 A6 BF D9 3E 90 6A 07 01
got 8 cmd 9F
[mg0] stoping camd..
got 126 cmd 9F
[mg0] namespace 300000 t-id 5 on-id 56
[mg0] descramble on 1, source 1
[mg0] service C26 index 0 pmt pid C26 (6)
ECM: CaID: 0x090F -> CaPID: 0x0C2E ProvID: 000000
ECM: CaID: 0x093E -> CaPID: 0x0066 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0C2E failed to decode.
[mg0] network can't decode
[mg0] pid 0x0066 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x090F -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
[newcamd] Ping to XXXX.XXXX.org:13005...
[newcamd] Pong from XXXX.XXXX.org:13005 (15ms)

__________________________________________________ ____

DM600PVR, Image Gemini-440, MgCamd 1.30, MGCamd-Config 1.30, gsub
2008-07-24, 09:51
deas

Fungerar viasat på den servern du ansluter till? Jag vet att vissa DM600 har lite problem när man växlar mellan providers... Ibland får man låta den stå där i upp till 30 sekunder innan bilden kommer... Vet inte om det är tunern som är problemet... Men kan du bekräfta att viasat fungerar för någonannan så man kan utesluta det?

Om du kan posta din newcamd.list och mg_cfg (ta bort alla anv/pass/ip)... Så kan vi kolla på dom så inget är fel där...
2008-07-24, 11:11
Lasse_67

Viasat fungerar på min kompis box, men det är en 500 och jag har en 600 men det borde ju inte vara någon skillnad...

Under /usr/keys ligger mg_cfg och newcamd.list, listar dom nedan

mg_cfg

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 02 }

__________________________________________________ ______________________________

newcamd.list

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS_MULTIPLE = XXXX.XXXX.org 13005:13006 XXXX XXXXXXXXXX f4 1d fa 10 3f 06 ad 34 f1 2d 4a 14 ef d0 wan XXXXXXXXXX
2008-07-24, 11:29
deas

Testa följande istället:

newcamd.list
CWS = XXXX.XXXX.org 13005 XXXX XXXXXXXXXX f4 1d fa 10 3f 06 ad 34 f1 2d 4a 14 ef d0 wan XXXXXXXXXX
CWS = XXXX.XXXX.org 13006 XXXX XXXXXXXXXX f4 1d fa 10 3f 06 ad 34 f1 2d 4a 14 ef d0 wan XXXXXXXXXX
CWS_KEEPALIVE = yes

mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show any ECMs
# 01 show only valid ECMs (default)
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# AU
# 00 disable
# 01 enable
# 02 Auto
# 03 network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 replace (not add) http-aes keys, only first key replaced !
U: { 02 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 03 }

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 60 }

# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 Off
# 01 Network
# 02 console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: { http://some.host.com/keys.php }
2008-07-24, 12:29
Lasse_67

Okey, ska testa det... men det blir om några dagar för jag ska åka bort!

Tack för hjälpen så länge!