Oscam - Via 093e ... Card system not supported.... help ???

Försöker få igång Via 093e på en DM500HD med Pli Enigma2.

Laddat ned o installerat senaste stabila version av Oscam.
Dom 3 konfig filerna ligger i tuxbox/config

Oscam.Conf

Kod:

---

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1


[webif]
HttpPort = 3001
HttpUser = root
HttpPWD = dreambox
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 1


[dvbapi]
Enabled = 1
Boxtype = coolstream
User = DVBApi
AU = 2

---

Oscam.server

Kod:

---

[reader]
Label = Viasat
Protocol = internal
Device = 0
Mhz = 337
Detect = CD
Group = 1
CAID = 093E
EMMCache = 1,3,2

---

Oscam.user

Kod:

---

[account]
User = DVBApi
AU = 1
Group = 1


[account]
User = User1
Pwd = Pass1
AU = 1
Group = 1

---

Logg (oscam.log)

Kod:

---



-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Feb 13 20:37:53 2012
-------------------------------------------------------------------------------
2012/02/13 20:37:53 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/13 20:37:53 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/13 20:37:53 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/13 20:37:53 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/13 20:37:53 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/13 20:37:53 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/13 20:37:53 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/13 20:37:53 2AAC7480 s signal handling initialized (type=sysv)
2012/02/13 20:37:53 2AAC7480 s 164 service-id's loaded in 4ms
2012/02/13 20:37:53 2AAC7480 s oscam.tiers loading failed
2012/02/13 20:37:53 2AAC7480 s 14 provid's loaded
2012/02/13 20:37:53 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/13 20:37:53 2AAC7480 s monitor: disabled
2012/02/13 20:37:53 2AAC7480 s camd33: disabled
2012/02/13 20:37:53 2AAC7480 s camd35: disabled
2012/02/13 20:37:53 2AAC7480 s cs378x: disabled
2012/02/13 20:37:53 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/13 20:37:53 2AAC7480 s CAID: 093E
2012/02/13 20:37:53 2AAC7480 s provid #0: 000000
2012/02/13 20:37:53 2AAC7480 s radegast: disabled
2012/02/13 20:37:53 2AAC7480 s http thread started
2012/02/13 20:37:53 2AAC7480 s creating thread for device /dev/sci0
2012/02/13 20:37:53 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/13 20:37:53 2AAC7480 s waiting for local card init
2012/02/13 20:37:53 2AF794B0 h HTTP Server listening on port 3001
2012/02/13 20:37:53 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/13 20:37:54 2AFF94B0 r viasat card detected
2012/02/13 20:37:55 2AFF94B0 r ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03
2012/02/13 20:37:56 2AFF94B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.37 Mhz
2012/02/13 20:38:01 2AFF94B0 r card system not supported
2012/02/13 20:38:01 2AFF94B0 r Normal mode failed, reverting to Deprecated Mode
2012/02/13 20:38:02 2AFF94B0 r ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03
2012/02/13 20:38:03 2AFF94B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.37 Mhz
2012/02/13 20:38:08 2AFF94B0 r card system not supported
2012/02/13 20:38:08 2AFF94B0 r card initializing error
2012/02/13 20:38:09 2AAC7480 s init for all local cards done
2012/02/13 20:38:09 2AAC7480 s anti cascading disabled

---

Ser inte vart jag gör fel eller vart det ligger.
Vad jag vet var att man behövde BoxId på äldre Oscam, men detta var borta i senaste versionen så man kan köra utan BoxId eller är jag ute o cyklar ???

Mycket tacksam för lite assistans.. börjar få abstinens på detta :/

När det gäller Viasat 093E så måste du ha med "boxid" parametern i oscam.server, typ:
boxid = XXXXXXXX

Det finns en wiki om hur man tar fram sin boxid:
http://www.comhit.net/showwiki.php?title=Boxid+Boxkey

Ska BoxId = HEX

stå på nån särskild rad eller kan jag lägga den på raden under CAID =

?

Slängde in BoxID.. o lite längre gick det nu.
Ändrade samtidigt till 500Mhz i conf filen då den säger att kortet ska köras i 5mhz o inte 3,37.

Felmedelande nu:

Kod:

---

--------------
>> OSCam <<  cardserver started at Mon Feb 13 21:52:26 2012
-------------------------------------------------------------------------------
2012/02/13 21:52:26 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/13 21:52:26 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/13 21:52:26 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/13 21:52:26 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/13 21:52:26 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/13 21:52:26 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/13 21:52:26 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/13 21:52:26 2AAC7480 s signal handling initialized (type=sysv)
2012/02/13 21:52:26 2AAC7480 s 164 service-id's loaded in 2ms
2012/02/13 21:52:26 2AAC7480 s oscam.tiers loading failed
2012/02/13 21:52:26 2AAC7480 s 14 provid's loaded
2012/02/13 21:52:26 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/13 21:52:26 2AAC7480 s monitor: disabled
2012/02/13 21:52:26 2AAC7480 s camd33: disabled
2012/02/13 21:52:26 2AAC7480 s camd35: disabled
2012/02/13 21:52:26 2AAC7480 s cs378x: disabled
2012/02/13 21:52:26 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/13 21:52:26 2AAC7480 s CAID: 093E
2012/02/13 21:52:26 2AAC7480 s provid #0: 000000
2012/02/13 21:52:26 2AAC7480 s radegast: disabled
2012/02/13 21:52:26 2AAC7480 s http thread started
2012/02/13 21:52:26 2AAC7480 s creating thread for device /dev/sci0
2012/02/13 21:52:26 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/13 21:52:26 2AAC7480 s waiting for local card init
2012/02/13 21:52:26 2AF794B0 h HTTP Server listening on port 3001
2012/02/13 21:52:26 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/13 21:52:27 2AFF94B0 r viasat card detected
2012/02/13 21:52:28 2AFF94B0 r ERROR: 0 characters found in ATR

---

Vet inte riktigt vad den menar med:
0 characters found in ATR

Det klagas också på:
2012/02/13 21:52:25 2AAC7480 s oscam.tiers loading failed
men räknar med att detta är skitsamma.

Hej

oscam.tiers behöver du inte bry dig om i detta fallet. Har du testat med

ident =

eller

ident = 093E

Detta ska isåfall finnas med i både oscam.server och oscam.user

Testa med ident = först då den antar default, annars kan du använda det andra exemplet för att tvinga kortet att identifiera kort och krypteringsguard.

Ska jag skippa CAID o köra ident eller ska båda va med ?

O vart i user filen bör jag lägga ident = xxx ?

båda ska vara med. lägg nedanför caid i båda filerna (oscam.server och oscam.user)

Det ska alltså se ut:

caid = 093E
ident =

eller

caid = 093E
ident = 093E

Kolla hur konfigurationsfilerna ser ut i punkt 2.6 i denna guiden och försök att göra likadant:
http://www.comhit.net/content.php/19...Cam-CardServer

Du behöver bara ta med de delarna som handlar om Viasat och 093E.

Skärpning, sluta snacka boxid när läsaren inte snackar med kortet! Ta bort MHz. Och sedan när blev en dm500hd en coolstream?

Sent from my Galaxy Nexus using Tapatalk

Nytt försök, samma bekymmer.

Server

Kod:

---

[reader]Label = Viasat
enable = 1
Protocol = internal
Device = 0
# Mhz = 500
# cardmhz = 500
Detect = CD
Group = 1
CAID = 093E
ident = 093E
BoxID = xxxxxx
EMMCache = 1,3,2

---

Conf

Kod:

---


[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1


[webif]
HttpPort = 8080
HttpUser = user
HttpPWD = pass
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 0
[dvbapi]
Enabled = 1
User = DVBApi
AU = 2

---

User

Kod:

---

[account]User = DVBApi
AU = 1
Group = 1


ident        = 093E:000000
caid        = 093E


[account]
User = User1
Pwd = Pass1
AU = 1
Group = 1


ident        = 093E:000000
caid        = 093E

---

Log

Kod:

---

------------------------------------------------------------------------------->> OSCam <<  cardserver started at Tue Feb 14 18:32:36 2012
-------------------------------------------------------------------------------
2012/02/14 18:32:36 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/14 18:32:36 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/14 18:32:36 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/14 18:32:36 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/14 18:32:36 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/14 18:32:36 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/14 18:32:36 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/14 18:32:36 2AAC7480 s signal handling initialized (type=sysv)
2012/02/14 18:32:36 2AAC7480 s 164 service-id's loaded in 2ms
2012/02/14 18:32:36 2AAC7480 s oscam.tiers loading failed
2012/02/14 18:32:36 2AAC7480 s 14 provid's loaded
2012/02/14 18:32:36 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/14 18:32:36 2AAC7480 s monitor: disabled
2012/02/14 18:32:36 2AAC7480 s camd33: disabled
2012/02/14 18:32:36 2AAC7480 s camd35: disabled
2012/02/14 18:32:36 2AAC7480 s cs378x: disabled
2012/02/14 18:32:36 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/14 18:32:36 2AAC7480 s CAID: 093E
2012/02/14 18:32:36 2AAC7480 s provid #0: 000000
2012/02/14 18:32:36 2AAC7480 s radegast: disabled
2012/02/14 18:32:36 2AAC7480 s http thread started
2012/02/14 18:32:36 2AAC7480 s creating thread for device /dev/sci0
2012/02/14 18:32:36 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/14 18:32:36 2AAC7480 s waiting for local card init
2012/02/14 18:32:36 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/14 18:32:36 2AF794B0 h HTTP Server listening on port 3001
2012/02/14 18:32:37 2AFF94B0 r viasat card detected
2012/02/14 18:32:38 2AFF94B0 r ERROR: 0 characters found in ATR


-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Tue Feb 14 18:32:38 2012
-------------------------------------------------------------------------------
2012/02/14 18:32:38 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/14 18:32:38 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/14 18:32:38 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/14 18:32:38 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/14 18:32:38 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/14 18:32:38 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/14 18:32:38 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/14 18:32:38 2AAC7480 s signal handling initialized (type=sysv)
2012/02/14 18:32:38 2AAC7480 s 164 service-id's loaded in 3ms
2012/02/14 18:32:38 2AAC7480 s oscam.tiers loading failed
2012/02/14 18:32:38 2AAC7480 s 14 provid's loaded
2012/02/14 18:32:38 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/14 18:32:38 2AAC7480 s monitor: disabled
2012/02/14 18:32:38 2AAC7480 s camd33: disabled
2012/02/14 18:32:38 2AAC7480 s camd35: disabled
2012/02/14 18:32:38 2AAC7480 s cs378x: disabled
2012/02/14 18:32:38 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/14 18:32:38 2AAC7480 s CAID: 093E
2012/02/14 18:32:38 2AAC7480 s provid #0: 000000
2012/02/14 18:32:38 2AAC7480 s radegast: disabled
2012/02/14 18:32:38 2AAC7480 s http thread started
2012/02/14 18:32:38 2AAC7480 s creating thread for device /dev/sci0
2012/02/14 18:32:38 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/14 18:32:38 2AAC7480 s waiting for local card init
2012/02/14 18:32:38 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/14 18:32:38 2AF794B0 h HTTP Server listening on port 3001
2012/02/14 18:32:38 2AFF94B0 r viasat card detected
2012/02/14 18:32:40 2AAC7480 s thread 2AAC7480 exit with signal 15
2012/02/14 18:32:40 2AAC7480 s cardserver down

---

Notera att i första försöket (gjordes iofs många med samma resultat, enbart klippt ut 2 sista ur loggen) så är det samma fel som tidigare.
I andra försöket dock stänger den igen cardserver.

Så, snälla ge mig lite hjärnceller för mina är totalt kassa...