inte i karlskrona heller
Utskriftsvy
inte i karlskrona heller
Hej macci !! Jag har skickat nu till dej.
Funkar nu i helsingborg vet i fan vad det har varit
behövde du uppdatera till (T-birds nya) koder eller?... (fick telefon, så jag har inte hunnit testa än)...
vad har ni gjort för ändring på kortet. har ni ett remote kort eller aukort?
när ni har fått det att fungera
Har inte gjort något alls.........
Då är den borttagen eftersom det inte funka
Jag har ett remote kort med slipstreams filer
Det var en gammal nyckelCitat:
Ursprungligen postat av T-bird
@gneter
Om du kör men slipstream kan du kolla vilken kod som gäller med OSD = On Screen Display
Har inte loggat med WB men läst på Slipstream-kortet och hos mig i Ö-götland kör de (enl. slipstream) på 0C: 2B AF ........ (Funkar kanon)
Kan det vara nåt försök att slå ut Guldkort. Har nämligen hört från en annan med GK att han har problem.
/gurra
Jag kör Guldkort och mitt funkar nu
Annan 0C utlagd
testa och rapportera
hej. har någon några koder som funkar! /abethebabe :D
Jag har en annan OC som jag körCitat:
Ursprungligen postat av T-bird
senaste 0c funkar inte i KARLSKRONA
T-BIRD.. koden du la ut fungerar.. /TACK
olika koder för olika sändare(orter)
Mkt intressant
Har fortfarande inga fungerande koder :-(
T-bird, tackar!
Koden funkar.
Hmm, tar tillbaks lite...
Koden funkar men mottagaren har fått fnatt, hoppar själv mellan kanaler
låser sig då och då m.m.
..tar in malmö sändaren
Vad har du för kort har snackat med en polare som har Funcard med slipstream och hans funkar inte heller och han och jag tar signalen från samma mast .................. mycket konstigtCitat:
Ursprungligen postat av ezac222
funkar.
Thx T-bird.
Vad håller dom på med?
Om det inte fungerar med 0C så räck upp en hand så kan ni få testa en 0A och 0E också
Funkar nu. Jag kör fun 1.20 på ett funcard 5Citat:
Ursprungligen postat av Payne
ja vill testa en 0A och 0E också
tillhör sundsvall sändaren
Jag bor vid Nackamasten i Sthlm. min, kör på den koden som T-bird rapporterade. Samma på Canal+ som övriga.
Fråga - går det via OSD se att den ligger på 0C? (slipstream)
Tack Till T-bird
nu funkar det för mej i umeå
Tackar T-bird. Äntligen ngn som har koll på grejorna :-) Nu funkar det fint i Gbg.
T-bird.. de funkar inte för mej.. =(( bor lite utanför Helsingborg... fattar inte.. =(
Någon som använder Emmaboda sändaren och fått det att funka???
Prova den gammla nycklen från StopStops sida den funkar för mej bor också utanför HelsingborgCitat:
Ursprungligen postat av pepsi_badder
:lol:Kod:Ett mycket bra fungerande forum klockren info tack så mycket det funka
Jepp, ett klipp från readme filenCitat:
Ursprungligen postat av frejac
Att tänka på är att en del boxar inte har 0-15 utan 3-18 då fär man plussa på lite 0=3 1=4 osv..Citat:
OSD modes
To set a OSD mode, enter PT/MR equal to the desired mode number. Below is a list defining what the label field of the active provider will display for each OSD mode. Default mode after reset is 2.
Mode 0: Label mode. The label of the providers as edited in the eeprom file is displayed for all providers.
Mode 1: Version Mode. Slipstream version string is displayed, e.g. "Slipstream 1.00"
Mode 2: Key in use mode. Displays the hexadecimal key representation of the used key on the last active provider. Hence, if active channel on the STB is coded and decrypted the key in use will be shown. If the channel is coded but not decrypted the string "Key 0x unknown" will be displayed, where x is the hexadecimal representation of the key index (8,9,A,..,F).
Mode 3: Entities in use mode. Displays the identity of the active issuer and provider entities, e.g. "FFF400-010C30".
Mode 8-15: Specific key mode. Displays the specific key stored in eeprom selected by the mode number. The key is displayed regardless of if it's a correct key or not. Please note that all numbers are decimal. Dec relates to hex as: 8=8,9=9,10=A,11=B,12=C,13=D,14=E and 15=F.
For all OSD modes except for mode 0, the Subscription Information menu will present key history and information about how opkeys have been updated. When the card is taken in use it is advised to first perform a formatting of the eeprom section containing the information about the opkeys, the metadata section. This is described in Commands below.
The Subscription Information screen for the selected provider will contain a list of 8 rows that will look something like in this example:
START DATE
STOP DATE CLASS THEME LEVEL
01/01/1980 01/01/1980 - 77 08
01/01/1980 01/01/1980 - 77 09
09/02/2003 10/02/2003 - 115 110
01/01/1980 01/01/1980 - 77 11
10/02/2003 01/01/1980 - 115 12
01/01/1980 01/01/1980 - 77 13
21/01/2003 24/01/2003 - 200 14
01/01/1980 01/01/1980 - 77 15
START DATE => The date at which the opkey was first updated.
STOP DATE => The date when the opkey was last used. If START DATE > STOP DATE this means the updated key is a "next" key.
CLASS => not used.
THEME => Information about how the opkey was updated. Look at THEME as a three digit number "xyz":
Digit Information Description/encoding
x : Update method 0 => AU using SA addressing, 1 => AU using UA addressing, 2 => Remote update
y : Issuer/provider 0 => AU over provider, 1 => AU over issuer. Only relevant for AU updates.
z : mkey Key index of used mkey. Only relevant for AU updates.
LEVEL => Index of the opkey about which the row gives information. Also, if the opkey is in use by the active channel, either 100 or 200 is added to the key index. 100 + index mean that key is in use and the key is correct. 200 + index mean that key is in use but the key stored in card is not correct.
So, looking back at the example screen above with the 8 rows of key information data we can tell that:
The key in use by the active channel is opkey 10, and it is successfully used for the decryption of the picture. As opkey 10 is in use now the STOP DATE tells us today's date is the 10:th of February.
Opkey 10 was AU updated the 9:th of February using UA updates over issuer with mkey 5.
Opkey 12 was AU updated the 10:th of February (today) using same method as for opkey 10. Since START DATE > STOP DATE for opkey 12, this means it's a "next key" not taken in use yet.
Opkey 14 was updated by remote control.
Some STBs sort the rows on basis of dates. This means that the order in which the rows is presented may differ from this example and when the dates changes. Remember to check the LEVEL value to be certain for which opkey each row applies to.
bor i uppsala.
har provat alla,men icke
har någon något förslag på hex?
thx C
Åfasiken, tack för förklaringen. Uppskattat.
Igår hade jag tydligen 0B aktiv...fast å andra sidan är startdatumet för 0B satt till 0/0-1980. Hmm vad kan det betyda?
"enter PT/MR"
Hmm vad innebär det? Ingen aning om hur man byter mode..
Edit: Kollade docen och såg vad det var :)
Tyvärr så kan jag inte göra något under "Modify adult lock" som det heter på min Force. Jag får bara se samma sak som syns under rätt ident under Service Information. Dvs vilken nyckel som används och så.
:D Tack för koderna T-Bird, dom funkar alldeles utmärkt även i Nässjö.
Tackar T-Bird, koderna fungerar via karlshamn och hörby sändarna!
Det är gott med AU. :wink:
tack T-Bird, koderna funkar i falkenberg
Boxcerkoder