Utskriftsvy
Sorry, jag kan inte hjälpa dig med Smartreader, har aldrig grejat med en sån.
Men ditt problem är helt klart att newcs och Smartreader inte kommer överens, antagligen p.g.a. inställningar.
Som du ser i loggen så får du "Reset failed..." när newcs försöker initiera kortläsaren. :(
tack för hjälpen :)
Såg det var några andra i detta forum som verkar haft problem av detta slag (lite av det)
Vad har du för kortläsare?
Just nu kör jag med PC/SC läsare. Tidigare har jag använt både gamla serieportsanslutna phoenix-interface och AD-Tekniks USB-phoenix.
Hej,
Verkar fn som kortet var felvänt, men ändå inte funkar under version 1.65.
jag har backat tillbaka till version 1.30 och kollar vidare där..hmm :)
YES ! :)
Det funkar, tusen tack för hjälpen..
Hur fungerar det med autouppdateringar typ detta.?
http://www.comhit.net/showwiki.php?t...utouppdatering
Det funkar bra om du gör inställningarna som det står i wiki:n.
D.v.s. A: { 01 } i mg_cfg och <au>on</au> på usern i newcs.xml.
Hej,
Om man skulle vilja göra detta i Ubuntu (som jag nyss installerade).
En helt ny värld har visat sig :)
Hur går man tillväga då, vad heter filerna jag behöver samt hur installerar men det.
Kanske finns någon Wiki som du kan tipsa om eller ?
Det finns en guide här:
http://www.comhit.net/content.php/19...wCS-Cardserver
Hej,
Provar detta på Ubuntu 11.10
hur galet är detta?
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:12:45
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 22:48:34 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 22:48:34 ] [ Config ] Option <blockc0> for device 0 (Phoenix linux) not present, defaulting to NO
[ 22:48:34 ] [ Config ] Option <crypto-special> for device 0 (Phoenix linux) not present, defaulting to NO
[ 22:48:34 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix linux) not present, defaulting to NO
[ 22:48:34 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix linux) not present, defaulting to NO
[ 22:48:34 ] [ Config ] Pincode for device 0 (Phoenix linux): 0000
[ 22:48:34 ] [ Config ] Option <sid> for device 0 (Phoenix linux) not present, no static sids added to filter
[ 22:48:34 ] [ Config ] Option <protectedsid> for device 0 (Phoenix linux) not present, no PIN Code will be sent
[ 22:48:34 ] [ Config ] /dev/ttyUSB3 ECM priority: round
[ 22:48:34 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myShares) on port 1234 - 0x810db88 [ op ptr 0x810eb18 ]
[ 22:48:34 ] [ DNS ] Resolved Hostname localhost to: 127.0.0.1
[ 22:48:34 ] [ Newcamd ] Server name : newcs
[ 22:48:34 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 22:48:34 ] [ Config ] Option <hostname> or <port> not present for User: lars, DISABLING reverse login
[ 22:48:34 ] [ Config ] Option <readers> not present for User: lars, NO reader control enabled
[ 22:48:34 ] [ Newcamd ] User 2: lars, Pass: lars, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 1
[ 22:48:34 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 22:48:34 ] [ EMM Cache ] Initialising dynamic Cache
[ 22:48:34 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2424
[ 22:48:34 ] Calibrating delay loops
[ 22:48:34 ] usleep(5) takes: 0 s 10 us
[ 22:48:34 ] usleep(10) takes: 0 s 14 us
[ 22:48:34 ] usleep(100) takes: 0 s 104 us
[ 22:48:34 ] usleep(500) takes: 0 s 504 us
[ 22:48:34 ] Allocation memory for 200 regular users
[ 22:48:34 ] [ Loader ] Starting Telnet on port 1001
[ 22:48:34 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 22:48:34 ] [ Loader ] Reader type 2 on node /dev/ttyUSB3
[ 22:48:34 ] [ CardMan ] Reseting reader parameters
[ 22:48:34 ] [ Phoenix ] Opening device /dev/ttyUSB3
[ 22:48:34 ] [ Phoenix ] Could not get device /dev/ttyUSB3
[ 22:48:34 ] [ Loader ] Reset failed ...
[ 22:48:34 ] [ Loader ] Starting Newcamd Server on port 10003
[ 22:48:34 ] [ Loader ] Starting Radegast Server on port 10001
[ 22:48:34 ] [ SockSrv ] Server thread started
[ 22:48:34 ] [ NewCS ] Ready to GO! :)
root@ubuntu:/# [ 22:48:34 ] [ Card queue /dev/ttyUSB3 ] Starting...
[ 22:48:34 ] bind: error! 98: Address already in use
[ 22:48:34 ] [ SockSrv ] Could not Bind to port 1001 EXITING!
[ 22:48:34 ] [ SockSrv ] Stopping port 1001
[ 22:48:34 ] bind: error! 98: Address already in use
[ 22:48:34 ] [ SockSrv ] Could not Bind to port 10001 EXITING!
[ 22:48:34 ] [ SockSrv ] Stopping port 10001
[ 22:48:34 ] [ Newcamd ] Newcamd thread Server started on port 10003
[ 22:48:34 ] bind: error! 98: Address already in use
[ 22:48:34 ] [ Newcamd ] Stopping port 10003