-
Provade MythTv istället. Importerade en channels.conf under input connections. Klickade i att den skall kolla om det går att dekryptera respektive kanal.
Då händer en del i oscam.log
Kod:
2012/08/21 16:43:36 2096C60 c TheUser (0B00&000000/1132/8D:5916): invalid (120 ms) (of 0 avail 0) - 0B00:1132 unknown (invalid SID)
2012/08/21 16:43:36 2096C60 c TheUser (0B00&000000/0BB9/8D:5916): invalid (120 ms) (of 0 avail 0) - SVT 2 (invalid SID)
2012/08/21 16:43:46 2096C60 c TheUser (0B00&000000/1132/8D:24FA): invalid (120 ms) (of 0 avail 0) - 0B00:1132 unknown (invalid SID)
2012/08/21 16:43:46 2096C60 c TheUser (0B00&000000/0BB9/8D:24FA): invalid (120 ms) (of 0 avail 0) - SVT 2 (invalid SID)
2012/08/21 16:43:56 2096C60 c TheUser (0B00&000000/1132/8D:98C3): invalid (120 ms) (of 0 avail 0) - 0B00:1132 unknown (invalid SID)
Har detta något med att göra med caid och mask i cardclient.conf?
Kod:
newcamd:localhost:15000:1/0B00/ffff:TheUser:ThePass:00010203040506070C090A0B0C0D
oscam.server
Kod:
# USB readers
[reader]
label = Canaldigital
enable = 1
protocol = mouse
detect = CD
device = /dev/ttyUSB0
services = cd nordic
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
caid = 0B00&FFFF
ident = 0B00:000000
ecmwhitelist = 0B00@000000:56,5B,68,4E
blockemm-g = 1
blockemm-unknown = 1
-
testa det här:
szap -a4 -c channels.conf "SVT1" -r
Om allt fungerar med sasc ska det se ut så här:
zapping to 317 'SVT1':sat 0, frequency = 11421 MHz H, symbolrate 24500000, vpid = 0x020c, apid = 0x02b0 sid = 0x0a8eusing '/dev/dvb/adapter4/frontend0' and '/dev/dvb/adapter4/demux0'status 1f
| signal f980 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
där FE_HAS_LOCK är det viktiga....Sedan är det bara att fixa så att det lirar med oscam med...
-
Jag är ingen expert på oscam tyvärr...men ditt kort verkar iaf fungerar med sasc...
-
" 0B00:1132 unknown (invalid SID)" kan det vara att kanalen inte finns till det kortet ?
-
Jag får svar.
Kod:
szap -a7 -c /etc/channels.conf "SVT1" -r
reading channels from file '/etc/channels.conf'
zapping to 146 'SVT1':
sat 0, frequency = 11421 MHz H, symbolrate 24500000, vpid = 0x020c, apid = 0x02b0 sid = 0x0a8e
using '/dev/dvb/adapter7/frontend0' and '/dev/dvb/adapter7/demux0'
status 1f | signal bf4a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf49 | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf4b | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
Måste fixa till detta så det fonkar :)
-
om du kör szap enligt ovan och sedan kör detta i ett annat fönster;
mplayer /dev/dvb/adapter7/dvr0
får du bild då ??
och sedan tail -f oscam.log
-
@Erik-NA
Om du lägger ut hela dina oscam config-filer är det lättare att se vad som kan vara fel.
Har du ident och caid rader i din oscam.user?
-
Vad betyder denna rad egentligen?
Kod:
(0B00&000000/0BB9/8D:ABB5): invalid (121 ms) (of 0 avail 0) - SVT 2 (invalid SID)
0B00&000000 är Caid och service? Vad betyder 0BB9/8D:ABB5?
-
Här kommer mina configs:
oscam.conf
Kod:
#
# main configuration
#
[global]
nice = -1
WaitForCards = 1
saveinithistory = 1
ClientTimeout = 5
CacheDelay = 120
PreferLocalCards = 1
# logging
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
maxlogsize = 200 # Logfile reaches to 200 KBytes
# monitor
[monitor]
port = 988
serverip = 0.0.0.0
nocrypt = 127.0.0.1
aulow = 120
monlevel = 1
appendchaninfo = 1
[anticasc]
enabled = 0
# web interface
[webif]
httpport = 8888
httpuser = admin
httppwd = pass
httprefresh = 10
httpallowed = 127.0.0.1,172.16.1.1-172.16.1.254
# protocols
[newcamd]
Key = 000102030405060708090A0B0C0D
port = 15000@0b00:000000
keepalive = 1
mgclient = 0
allowed = 127.0.0.1,172.16.1.1-172.16.1.254
oscam.server
Kod:
# USB readers
[reader]
label = Canaldigital
enable = 1
protocol = mouse
detect = CD
device = /dev/ttyUSB0
services = cd nordic
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
caid = 0B00
ident = 0B00:000000
ecmwhitelist = 0B00@000000:56,5B,68,4E
blockemm-g = 1
blockemm-unknown = 1
oscam.user
Kod:
#
# user configuration
#
# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled
[account]
user = TheUser
pwd = ThePass
uniq = 1
group = 1
au = Canaldigital
caid = 0B00&FFFF
disabled = 0
services = CanalDigital
ident = 0B00:000000
keepalive = 1
-
cardclient.conf
Kod:
#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is 1700 & FF00. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
#newcamd:hostname:port:emm/caid/mask:username:password:cfgKey
newcamd:localhost:15000:1/0B00/ffff:TheUser:ThePass:000102030405060708090A0B0C0D
