Vad Snäll Jag ett DM800 and ett DM500 Ville Cardshare till 500 Måsta man ha samma immage och cam and server ? Vad snäll Hjälpa mig ;)
Tack Tack ;)
\\S.
Utskriftsvy
Vad Snäll Jag ett DM800 and ett DM500 Ville Cardshare till 500 Måsta man ha samma immage och cam and server ? Vad snäll Hjälpa mig ;)
Tack Tack ;)
\\S.
Hmmmm.
Varför inte prova med SÖK !! Din fråga är besvarad minst 100 ggr bara i år.
matkoh att du lyckades att utläsa vad han ville är för mej under. Då jag läst det 10 ggr och fattar fortfarande inte vad han söker/vill.
Hmmm.
Håller med föregående talare, men jag läste mellan raderna. Vilket språk det är som personen använder är för mig en gåta, svenska är det knappast.
Sorry :( I did try with my Swedish :-| I have com hem card a DB800HD runnning OSCAM and Evocam Then a DB500 I would like to set as client runs newcs and newcamd.........Any chance I get this to work ;) PLEASE my Swedish is not the best so if you can point me in right FAQ I would be very gratefuk ;) Please ask if yiu need more info........
Image on both Pli .....Any questions please ask ;)
\\S.
All you have to do is:
1. On the 800: Add a user for the 500. You do this in the file oscam.user.
2. On the 500: Edit the file newcamd.list and add a CWS line pointing out the server on the 800.
Hi and Thanks ;) Did what you said log files look OK But How do I see channels on the 500 ?? ;) Not sure where look ;) ?
Thanks and sorry for my before Swenglish ....
\\S.
I'm not sure I understand your question?
You have to have the 500 connected to the Comhem antenna socket as well. And you search for channels in the menus just like on the 800.
When all is configured you could just press OK button on the remote to bring up the channel list.
Hmmm Both connected to comhem Output jack .......Hmmm and a TP cable ?....Was trying to skip cables ;) Wife Freaking ;) I try that then....Do I need set port ?
Thanks you a great Help ;)
\\S.
Yes, both connected to Comhem antenna jack and both connected to TP cable (data network).
Not sure what you mean by "setting port"?
There is some port configuration in newcamd.list which should correspond to your settings in oscam.conf on server.
Hi Again,
Here are my settings Maybe you can see if look OK Please :)
ON DM800 - Server :
/etc/tuxbox/config/oscam-experimental/oscam.user
[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
And on DM500 Client
/var/tuxbox/config/newcamd/newcamd.conf
CWS = 192.168.0.14 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
Dont seem to have newcamd.list .....
What do you think ?
Thanks in Advance ;)
\\S.
I don't know why you need all those groups, but anyway that should not be a problem:
In your CWS line you also need a port number:Citat:
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
CWS = 192.168.0.14 port user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
The port number and the DES key should correspond to the settings you have under the [newcamd] section in oscam.conf on the server.
Sorry To Be silly but What is DES Key ? Thanks ;)
\\S.
The DES key is the long series of numbers, in your case "01 02 03 04 05 06 07 08 09 10 11 12 13 14". This key is used to encrypt the traffic and should (must) be the same on the server and on the client.
Hi There I think I am getting close ;) But :-| Thanks For all the help .......
2012/08/06 16:19:55 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7196 (mipsel-oe-linux)
2012/08/06 16:19:55 0 version=1.20-unstable_svn, build #7196, system=mipsel-oe-linux, nice=-1
2012/08/06 16:19:55 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/08/06 16:19:55 0 max. logsize=10 Kb, loghistorysize=4096 bytes
2012/08/06 16:19:55 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/06 16:19:58 0 s init for all local cards done
2012/08/06 16:19:58 0 s anti cascading disabled
2012/08/06 16:19:58 59B840 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2012/08/06 16:19:58 59B840 c dvbapi: 0 entries read from oscam.dvbapi
2012/08/06 16:21:55 59DA00 c client connected to 35000 port
2012/08/06 16:21:55 59DA00 c plain newcamd-client 192.168.0.18 rejected (invalid access)
2012/08/06 16:21:55 59DA00 c anonymous disconnected from 192.168.0.18
2012/08/06 16:21:55 59DA00 c thread 2AF6D4B0 ended!
Seems Like 3 main files ? Oscam.conf
SERVER
[newcamd]
key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port = 35000,34003@0500:FFF400,042800,042810
keepalive = 1
allowed = 192.168.0.14,127.0.0.1,192.168.65.206
Then oscam.user
[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
Client
Newcamd.conf
CWS = 192.168.0.14 35000 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
IP Server = 192.168.0.14 and Client is 192.168.0.18
Thanks m8 I buy ya a beer ;)
\\S.
In your allowed you have 192.168.0.14 shouldn't you have the clients ip 192.168.0.18 there?
I don't know oscam so i am not sure.
Yep I see that and changed.....Seems Like a connection error ?
Hmmmm Can I send My files to Ya ;)
Please Check My Config ;) Must be a user error I think ;) ?
2 Beers ;)
HUGS
\\S.
Try this:
What provider are you using? 0500 is for Boxer, maybe you have Comhem or other?Kod:SERVER
[newcamd]
key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port = 35000@0500:000000
Then oscam.user
[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
caid = 0500
ident = 0500:000000
Hi Atomized ;)
Great with all the help much appreciated ;)
Yes I have Comhem Orig card in the DM800 ;)
Thanks again soon be 3 beers for you ;)
\\S.
Caid for Comhem is 0b00.
Change these values.
In section newcamd:
port = 35000@0B00:000000
key = 0102030405060708091011121314
In section account:
caid = 0B00
ident = 0B00:000000
micklarn is right. :)
And there should be no spaces in the DES key in the oscam configuration. I missed that in my example.
Looking good ;)
Have connection anyway ;)
2012/08/07 16:08:54 58C7E8 r lower [conax] ready for requests
2012/08/07 16:08:57 0 s init for all local cards done
2012/08/07 16:08:57 0 s anti cascading disabled
2012/08/07 16:08:57 59B5C8 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2012/08/07 16:08:57 59B5C8 c dvbapi: 0 entries read from oscam.dvbapi
2012/08/07 16:09:48 59D788 c client connected to 35000 port
2012/08/07 16:09:48 59D788 c encrypted newcamd:35000-client 192.168.0.18 granted (user2, au=auto (1 reader))
2012/08/07 16:09:48 59D788 c user user2 authenticated successfully (generic)
2012/08/07 16:09:48 59D788 c AU enabled for user user2 on reader lower
2012/08/07 16:09:54 58C7E8 r lower [conax] user2 emmtype=shared, len=130, idx=0, cnt=1: written (107 ms)
BUT :-|
2012/08/07 16:11:34 59D788 c user2 (051C&44DE79/0000/051C/4C:E622): rejected caid (1 ms) (0/0/0/0) (invalid caid 51c )
2012/08/07 16:11:45 59D788 c user2 (0455&FEE66C/0000/0455/4C:F3B1): rejected caid (1 ms) (0/0/0/0) (invalid caid 455 )
2012/08/07 16:11:53 59D788 c user2 (0451&4A5DFA/0000/0451/4C:05C8): rejected caid (1 ms) (0/0/0/0) (invalid caid 451
:(
?? Thanks you guys are Best One more hurdle I think ;)
Maybe I need to edit /etc/tuxbox/config/oscam-experimental/oscam.dvbapi ??
You guys upto 4 beers
\\S.
Why don't you present all your configfiles.
On serverbox as well on clientbox.
At least I, have no clue how your config looks like.
Here's a good site for you to read about oscam config.
http://streamboard.de.vu/svn/oscam/t...n/doc/example/
beson
In order to solve your problem I think you need to show us your complete configuration files. Please show us from server: oscam.conf, oscam.server and oscam.user. From client: newcamd.conf.
He, he...
One minute ahead of you atomized. :D
beson
Yeah, you were a little bit faster this time... :)Citat:
Ursprungligen postat av beson
He He Guys ;)
OK Here We go ;) I show the whole files ;)
SERVER 192.168.0.14
oscam.server :
moreroot@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...cam.server.txt
[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid =
ident =
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0
# uncomment and enable this lines below only if devices are present
#[reader]
#label = upper
#enable = 0
#protocol = internal
#device = /dev/sci1
#detect = cd
#mhz = 500
#cardmhz = 500
#caid =
#ident =
#services =
#group = 2
#emmcache = 1,3,15
#lb_weight = 100
#cccreshare = 3
#audisabled = 0
#[reader]
#label = smartreader
#enable = 0
#protocol = mouse
# dreambox kernel does not support smartreader protocol so use mouse and set speed with ttyS0 tool
# for devices boxes with libusb1.0.6 or greater and kernel above 2.6.30 use smartreader
#device = /dev/ttyUSB0
# for smartreader protocol use bus:device
# bus:device bus name and device name of the Smartreader+
# (get the names with lsusb 'Bus' and 'Device')
#detect = cd
#mhz = 600
# do not use with mouse do use with smartreader protocol
#cardmhz = 600
# do not use with mouse do use with smartreader protocol
#caid =
#ident =
#services =
#group = 3
#emmcache = 1,3,15
#lb_weight = 100
#cccreshare = 3
#audisabled = 0
# uncomment and adapt to your needs the readers below this line or ad extra ones.
#[reader]
#label = pcserverlocalnetwork
#enable = 1
#protocol = cccam
#device = 192.168.123.9,12000
#account = user
#password = pasword
#reconnecttimeout = 1
#group = 5
#emmcache = 1,2,15
#lb_weight = 100
#cccversion = 2.2.1
#cccmaxhops = 5
#ccckeepalive = 1
#cccreshare = 3
#audisabled = 0
# on cccam it would be a c line like:
#C: 192.168.123.9 12000 user pasword no { 0:0:5 }
#[reader]
#label = remoteccampeer
#enable = 1
#protocol = cccam
#device = cccam.example.cx,12925
#account = user
#password = password
#services = !service1,!service2
# (the ignored providers or channel see oscam.services)
#reconnecttimeout = 2
#group = 12
#lb_weight = 100
#cccmaxhops = 5
#cccreshare = 3
#ccckeepalive = 1
#audisabled = 1
# the best is for NOT sending emm's to remote cccam peers
#cccversion = 2.2.1
# on cccam it would have been a c line like :
# C: cccam.example.cx 12925 user password no { 0:0:5 }
oscam.conf :
root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.conf.txt
[global]
disablelog = 0
disableuserfile = 1
logfile = /oscam.log
# first create the needed directory's and see if there is usb stick, cf or hdd
#usrfile = /media/usb/oscam/user.log
# first create the needed directory's and see if there is usb stick ,cf or hdd
#cwlogdir = /media/usb/oscam
# first create the needed directory's and see if there is usb stick ,cf or hdd
#emmlogdir = /media/usb/
# first create the needed directory's and see if there is usb stick ,cf or hdd
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600
[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
[webif]
httpport = 16200
httpuser = user
httppwd = password
httprefresh = 20
httpallowed = 127.0.0.1,192.168.65.1,192.168.65.3,192.168.65.206 ,192.168.65.208,192.168.65.11
httphideidleclients = 0
httpreadonly = 0
[cccam]
port = 12000
version = 2.2.1
reshare = 3
reshare_mode = 4
ignorereshare = 0
minimizecards = 0
keepconnected = 1
nodeid = 0a0b0c0d0e0f1215
[dvbapi]
enabled = 1
au = 1
user = dvbapiau
boxtype = dreambox
[newcamd]
port = 35000@0B00:000000
key = 0102030405060708091011121314
keepalive = 1
allowed = 192.168.0.18,127.0.0.1,192.168.65.206
#[radegast]
#port = 30000
#user = radegastuser
#allowed = 127.0.0.1,192.168.0.0-192.168.255.255
#[camd33]
#port = 40000
#serverip = 192.168.123.1
#key = 01020304050607080910111213141516
#[cs378x]
#port = 50000@0300:600000
#[gbox]
#hostname = host.example.com
#port = 60000
#password = mypassword
oscam.user :
root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.user.txt
# is needed for au
[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
caid = 0B00
ident = 0B00:000000
[account]
user = dvbapiau
pwd =
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
# put all reader groups otherwise you not have ecm from the non included group.
uniq = 3
monlevel = 0
au = 1
# for using mpcsmon
[account]
user = usermonitor
pwd = pasword
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,19,20 ,21
uniq = 1
sleep = 0
monlevel = 4
#[account]
#user = user2
#pwd = pasword2
#disabled = 0
#group = 1,2,3,4,5,6,7,8,9,10,11,13,14,15,16
#uniq = 3
#sleep = 0
#monlevel = 0
#service = !service1,!service2
#services defind in oscam.services if empty all services are allowed.
#cccmaxhops = 5
#cccreshare = 2 # note the difference with { 0:0:3 } from f line cccam .
#cccignorereshare = 0
#keepalive = 1
#hostname = cccam.example.cx
# f line in cccam would be like :
# F: user pasword2 5 0 0 { 0:0:3 } { } { } cccam.example.cx
# this users c line here server line in oscam.server has group 12 to avoid loop back I did not put group 12 in his user
# account f line. Normally it's not needed... However some svn versions can have segfault errors and jumps out due to that loopback.
# By doing this you will avoid that kind of problems.That's also the reason that i asign a different group to each reader.
CLIENT 192.168.0.18
newcamd.conf :
root@dm500 ~ # more /var/tuxbox/config/newcamd/newcamd.conf
# /var/tuxbox/config/newcamd/newcamd.conf
#
# newcamd mandatory settings
#
# Use emulator?
EMU = yes
# if both control word server and emulator keys are available for the
# channel, which method should be tried first?
PREFER_EMU = yes
# Autoupdate for Emu and Control Word Servers
# AU is always yes if there are betad UDS control word server
# connected to newcamd
AU = yes
#
# OSD
#
# number of seconds to show the newcamd OSD, works on enigma only
# 0 seconds -> OSD off
# 1 second -> show "Can't decode" messages only
OSD_TIMEOUT = 0
# Recent Enigma versions come with a new option "Use http authentication"
# in the Expert Setup menu. If this option is enabled, the Enigma web server
# requires all clients to authorize themselves with username (root) and
# password (usually dbox2 or dreambox). The following option tells newcamd
# about the authentication username and password to use for the web server
# in order to be able to display its on screen information.
OSD_WEB_LOGIN = root:dreambox
#
# newcamd debug options
#
# dumps all ca systems used by a channel on the console
SHOW_ALL_CA_SYSTEMS = no
# print debug messages about ECM handling
DEBUG_ECM = yes
# print debug messages about EMM handling
DEBUG_EMM = no
# print debug messages about Control Word Server (CWS)
DEBUG_CWS = yes
# print debug messages about dbox2 CAM (cam-alpha.bin)
DEBUG_CAM = yes
# hex dump of entire PAT
SHOW_PAT = no
# hex dump of entire PMT
SHOW_PMT = no
# hex dump of entire ECM
SHOW_ECM = no
# hex dump of entire CAT
SHOW_CAT = no
# hex dump of entire EMM (AU)
SHOW_EMM = no
# show network ECM messages being sent and received from/to the cardservers
SHOW_CWS_ECM = no
# show network EMM messages being sent and received from/to the cardservers
SHOW_CWS_EMM = no
# hex dump of EMMs with wrong signature
EMM_REPORT_WRONG_SIG = no
#
# newcamd optional settings
#
# Delay between reception of new control word and writing them into
# the CSA registers
# this is a default, can be changed for each individual key in keylist
DEFAULT_CW_DELAY = 0
# reload config on every channel zap
RELOAD_CONFIG_ON_ZAP = yes
# reload keylist on every channel zap
RELOAD_KEYLIST_ON_ZAP = no
# write osd ca info to file
CA_INFO_FILE = /tmp/cainfo.txt
#
# newcamd mandatory settings for control word servers (cws)
#
# Cardserver list
#
# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name> [noecm]
#
# wan connections will be dropped and rebuild if newcamd is told so by camdcmd
# (see admin options)
#
# If the last word in the CWS line is noecm, newcamd will not attempt to send
# any ecms to that card, it will only send EMMs (AU) if userid is 1. Useful if
# you want to merge several cards of one provider into one port using
# cardspider.
#
# hostname = uds to use betad, port is the serial port in that case
#
# CWS = uds 1 dummy dummy
#
CWS = 192.168.0.14 35000 user2 pass2 0102030405060708091011121314
#
# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
CWS = uds 0 local local
CWS_MULTIPLE = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
#
# newcamd optional settings for using control word servers (cws)
#
# Timeout for cardserver login in 100ms
CWS_CONNECT_TIMEOUT = 20
# Port to listen for incoming cardserver connections (reverse login)
# and/or admin connections
CWS_INCOMING_PORT = 12000
# Port to get a list of all connected cardservers, just telnet to it
CWS_DEBUG_PORT = 12001
# send keep alive messages to servers to keep connections from dying by
# unreasonable router NAT timeouts, make sure all cardservers/spiders you
# conntect to are v5.25 or newer, otherwise you'll loose connection to them,
# if set to yes
# seems this feature is commonly misunderstood, it only keeps connections
# open even if no data packets are using it for while (NAT routers tend to
# forget about established tcp connections when they are inactive), it is
# NOT to automatically reconnect to servers, see also Q&A in readme.txt
CWS_KEEPALIVE = no
#
# newcamd admin control options
# (incoming port is the same as CWS_INCOMING_PORT)
#
# <password> <14 byte des key>
#
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
You Guys best !! Beers for both ......
I will check the link as well .... Sorry Was a Dead Link ......
Tonight is the Night
\\S.
Noticed and changed in oscam.server :
[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid = 0B00
ident = 0B00:000000
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0
Please Help :) Many Beers To Come ;)
Thanks Soooooooo.....
Nix Not work with the above change to oscam.server :(
Please check Config files .........
\\S.
\\S.
Hmmm.
Please remove all the line starting with "#", it is very hard to read the files.
Well, what a load of crap you have in your config files... :rolleyes:
Please, please do not use these stupid "config file generators"... Instead look at the excellent guide made by forum member 'minime' and try to write the config files yourself. That way you will have a better understanding of the different settings.
http://www.comhit.net/content.php/19...Cam-CardServer
I know your Swedish is not the best but just look att section 2.6 in the guide for examples of reasonable settings.
Sorry, but now I just don't have the time or motivation to go through all your weird configuration.
Puh, that was ouite a long config....
Try this config instead, and notice I'm not using newcamd protocol on clientbox, but oscam instead, and [cs378x] protocol.
So also install oscam on clientbox, and delete mgcamd.
Serverbox
oscam.conf
oscam.serverKod:[global]
logfile = /oscam.log
maxlogsize = 500
nice = -1
WaitForCards = 1
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser =
httppwd =
httpallowed = 127.0.0.1,192.168.1.10-192.168.1.255
[cs378x]
port = 12345@0B00:000000
[dvbapi]
enabled = 1
user = server
au = 1
oscam.userKod:[reader]
label = comhem
enable = 1
protocol = internal
detect = cd
device = /dev/sci0
cardmhz = 500
mhz = 500
au = 1
EMMCache = 1,1,2
group = 1
caid = 0B00
ClientboxKod:[account]
user = server
pwd = server
group = 1
au = 1
caid = 0B00
ident = 0B00:000000
[account]
user = client
pwd = client
group = 1
au = 1
caid = 0B00
ident = 0B00:000000
oscam.conf
oscam.serverKod:[global]
logfile = /oscam.log
maxlogsize = 500
nice = -1
WaitForCards = 1
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser =
httppwd =
httpallowed = 127.0.0.1,192.168.1.10-192.168.1.255
[cs378x]
port = 12345@0B00:000000
[dvbapi]
enabled = 1
user = client
au = 1
besonKod:[reader]
label = comhem
protocol = cs378x
device = 192.168.0.14,12345
user = client
password = client
caid = 0B00
group = 1
au = 1
I understand OK here ya go I check the link but still cant get to work :( Im sure the answer is in this error :
2012/08/08 00:02:49 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=40, cnt=1: written (108 ms)
2012/08/08 00:03:00 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=41, cnt=1: written (109 ms)
2012/08/08 00:03:04 59DF00 c user2 (051C&44DE79/0000/051C/4C:5EF5): rejected caid (1 ms) (0/0/0/0) (invalid caid 51c)
2012/08/08 00:03:07 59DF00 c user2 (0455&FEE66C/0000/0455/4C:62FF): rejected caid (1 ms) (0/0/0/0) (invalid caid 455)
2012/08/08 00:03:13 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=42, cnt=1: written (108 ms)
2012/08/08 00:03:15 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=37, cnt=2: written (110 ms)
The Invaild caid ......I googled but cant find answer :(
Here The files ...
root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.conf.txt
[global]
disablelog = 0
disableuserfile = 1
logfile = /oscam.log
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600
[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
---------------------------------------------------------------------
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.conf.txt
[global]
disablelog = 0
disableuserfile = 1
logfile = /oscam.log
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600
[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
--More-- (56% of 1432 bytes)
root@dm800:/# vi /etc/tuxbox/config/oscam-experimental/oscam.user
# is needed for au
[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
caid = 0B00
ident = 0B00:000000
[account]
user = dvbapiau
pwd =
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
# put all reader groups otherwise you not have ecm from the non included group.
uniq = 3
monlevel = 0
au = 1
# for using mpcsmon
[account]
user = usermonitor
pwd = pasword
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,19,20 ,21
uniq = 1
sleep = 0
monlevel = 4
--------------------------------------------------------------------------
root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...cam.server.txt
[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid = 0B00
ident = 0B00:000000
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0
--------------------------------------------------------------------------------
CLIENT
root@dm500 ~ # more /var/tuxbox/config/newcamd/newcamd.conf
EMU = yes
PREFER_EMU = yes
AU = yes
# OSD
OSD_TIMEOUT = 0
OSD_WEB_LOGIN = root:dreambox
SHOW_ALL_CA_SYSTEMS = no
DEBUG_ECM = yes
DEBUG_EMM = no
DEBUG_CWS = yes
DEBUG_CAM = yes
SHOW_PAT = no
SHOW_PMT = no
SHOW_ECM = no
SHOW_CAT = no
SHOW_EMM = no
SHOW_CWS_ECM = no
SHOW_CWS_EMM = no
EMM_REPORT_WRONG_SIG = no
DEFAULT_CW_DELAY = 0
RELOAD_CONFIG_ON_ZAP = yes
RELOAD_KEYLIST_ON_ZAP = no
CA_INFO_FILE = /tmp/cainfo.txt
#
CWS = 192.168.0.14 35000 user2 pass2 0102030405060708091011121314
#
CWS = uds 0 local local
CWS_MULTIPLE = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = no
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Thanks for the time and help .....
\\S.
Nice One Benson ;) Sorry I posted last before I read this I try now Finger crossed ;)
\\S.
Sorry :( Now have I did what ya said but now have probs to install OSCAM :( Cant find under blue button .....Manual install ? checked downloads cant seem to find it :(
\\S.
Step one is to make your server working properly.
Then you can start to config your clientbox.
beson
His server config IS correct, the client sends crap! The caid's received by the server is not event the same!
I don't know what img your'e using, but with OpenPli you can dl and install cams from plugins menu.Citat:
Ursprungligen postat av spacecake
I would suggest that you start from the beginning, and make proper installations of img (OpenPli), oscam and config files.
beson
I would not be so sure that the server config is correct, as he/she has specifyed 19 diffrent groups for some stupid reason...Citat:
Ursprungligen postat av Volvo3
and he/she only has one reader in his/her oscam.server config
And if looking att the oscam.conf file...there is alot of crap in that file that one can remove....
And why use newcamd.conf for his/her clients if he/she is using mgcamd...use newcamd.list instead and delete all newcamd.conf files....
unless he/she is using a very damn old version of mgcamd...if so upgrade mgcamd to mgcamd-1.35a
Thanks Volvo3 can you please explain "The caid's received by the server is not event the same"Citat:
Ursprungligen postat av Volvo3
Thanks
\\S.
Hi There,
Sorry I am not sure what or why so many groups ?
The images I use are for server :
OpenEmbedded Linux dm800
Openpli 2.1 dm800
And the client is :
PLi dm500 Jade 20090627 (based on 1.09)
welcome on your dreambox! - Kernel 2.6.9 (12:08:16).
Please feel free to let me know what images to use ?
Here is a PS of the server :
root@dm800:~# ps
PID USER VSZ STAT COMMAND
1 root 1740 S init [3]
2 root 0 SWN [ksoftirqd/0]
3 root 0 SW< [events/0]
4 root 0 SW< [khelper]
5 root 0 SW< [kthread]
6 root 0 SW< [kblockd/0]
7 root 0 SW< [khubd]
8 root 0 SW [pdflush]
9 root 0 SW [pdflush]
10 root 0 SW< [kswapd0]
11 root 0 SW< [aio/0]
12 root 0 SW< [ata/0]
13 root 0 SW< [ata_aux]
14 root 0 SW< [scsi_eh_0]
15 root 0 SW [mtdblockd]
16 root 0 SWN [jffs2_gcd_mtd3]
53 root 0 SW [kcdfsd]
56 root 0 SW< [cifsoplockd]
57 root 0 SW< [cifsdnotifyd]
75 root 0 SW [b_event]
76 root 0 SW [b_idle]
91 root 0 SW< [fp]
94 root 0 SW< [mpeg]
105 root 0 SW< [dmx0]
110 root 0 SW< [dmx1]
115 root 0 SW< [dmx2]
120 root 0 SW< [dmx3]
121 root 0 SW< [dmx_hw_sec]
194 root 1952 S /usr/bin/wdog tpmd
195 root 4484 S tpmd
314 root 3244 S udhcpc -R -b -H dm800 -p /var/run/udhcpc.eth0.pid -i
323 daemon 1724 S /sbin/portmap
327 root 4932 S /usr/bin/oscam-experimental -b -r 2 -c /etc/tuxbox/c
328 root 15444 S < /usr/bin/oscam-experimental -b -r 2 -c /etc/tuxbox/c
371 messageb 2724 S /usr/bin/dbus-daemon --system
382 root 2376 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_hos
385 root 3608 S /usr/sbin/inetd
388 root 13644 S /usr/sbin/smbd
390 root 13644 S /usr/sbin/smbd
391 root 6944 S /usr/sbin/nmbd
394 root 3308 S /sbin/syslogd -n -C64 -m 20
396 root 3244 S /sbin/klogd -n
406 avahi 3468 S avahi-daemon: running [dm800.local]
407 avahi 3468 S avahi-daemon: chroot helper
417 root 22708 S /usr/bin/evocamd
420 root 3244 S /bin/sh /usr/bin/enigma2.sh
425 root 74264 S /usr/bin/enigma2
438 root 0 SW< [kdvb-ad-0-fe-0]
Thanks in advance ........
\\S.
PS. I am a guy ;)