hur lägga till mgcamd client på oscam server [LÖST]
Hej!
jag har en dreambox dm 800se (clone) med A8P sim, jag kör openPLI 3.0 och OSCAM 1.20-unstable_svn build r0.
Jag får bild på server boxen och vill nu dela med min andra dm800se(clone) openPLI 3.0 via mgcamd (1.35a-r6) inom mitt lokala nätverk. Jag har suttit några dagar nu men får det inte att fungera:mad:.
så här ser det ut just nu:
oscam config
[global]
disablelog = 1
logfile = /dev/tty
nice = -1
waitforcards_extra_delay = 3000
preferlocalcards = 1
dropdups = 1
lb_mode = 1
lb_retrylimit = 1600
lb_reopen_mode = 1
[monitor]
port = 16500
nocrypt = 192.168.0.0-192.168.254.254
monlevel = 4
[newcamd]
port = 10001@0B00:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[dvbapi]
enabled = 1
au = 1
user = dvbapiau
boxtype = dreambox
[webif]
httpport = 8080
httpuser = admin
httppwd = admin
httphelplang = en
httprefresh = 15
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
oscam server
[reader]
label = canaldigital
protocol = internal
device = /dev/sci0
caid = 0B00
detect = cd
mhz = 357
cardmhz = 357
ident = 0B00:000000
group = 1
emmcache = 1,3,2
[reader]
label = viasat
protocol = internal
device = dev/sci1
caid = 093E
boxid = ********
detect = cd
mhz = 500
cardmhz = 357
ident = 093E:000000
group = 2
emmcache = 1,3,2
blockemm-s = 1
[/REFLIST]
oscam user
[account]
user = dvbapiau
pwd =
disabled = 0
group = 1
au = 1
[account]
user = box2
pwd = box2
group = 1,2
au = 1
cccmaxhops = 0
cccreshare = 0
newcamd.list (box2)
CWS= 192.168.1.105 10001 box2 box2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
tack på förhand!:)
