ok så du använde denna:

@ALTERNATIVE METHOD@

For this method, you need a FUN7 card
Using a suitable program, program the FLASH of the FUN7 card with
FUN7LDR.HEX,
and program the EEPROM with predator2XX.bin. Make sure the program you use
handle the large eeprom size of the fun7 card correctly!
END alternative method

Insert the programmed card into the Dragon module. Insert this into a
receiver
and turn on the receiver. make sure you are tuned to an FTA channel.

Go to the Common interface menu on the receiver, and select the "Dragon
Loader" module.
In the next menu, select "yes, Load module".
Now a menu appears indicating that loading is in progress. To see the actual
progress percentage,
select "refresh". There is no auto-refresh because some receivers had
problems with that....

When loading is complete, a menu appears saying "Loading successful". REMOVE
the loader
card from the module, and switch off and turn back on the receiver.



Kan jag använda Dragon loader card i denna metoden?