M2 går nu att omvandla..

[Garbo]

Annars går det lika bra med guld/fun/silver (nått som varje entusiast borde ha liggande), kostar annars ca 30-50:-

Visst har man iallafall lite guld liggande...
Vilket filnamn är det Comhit Crew syftar på när man vill försöka med guldkort?
Är det Bbaio-filer, eller Gold_Via12-filer. Tänker främst på nagra1-kodade kanaler på PolSat eller Hispasat... TPS hittar jag filer till.
Skulle någon vänlig själ vilja återkomma med ett exempel...?

Regards
/ Garbo 8)

[ibi]

Titanium!kort o TMB filen.

[massaro carlo]

Ni behöver

1.. Cas 3 interface http://www.duolabs.com/cas3-eng.htm , pris ca € 89
2.. Cas studio 6.5
3.. Bootloader filer för OPOS
4.. Script för att ta reda på transportnyckel till erat kort

Den som tycker att det är värt det så önskar jag bara lycka till.

Annars går det lika bra med guld/fun/silver (nått som varje entusiast borde ha liggande), kostar annars ca 30-50:-

Hej, jag vill så gärna men ?
jag har: Cas 3 interface ,Studio 6.5 och MII.
Kan du hjälpa mig med Bootloader och Script för att ta reda på transportnyckel kort.
Tack på för hand
Carlo

[T-bird]

Du har frågat samma sak hos danskarna :shock:

Varför tittar du inte i deras download :roll:

Har sett scriptet för transportnyckeln men kommer inte ihåg var det var, det kanske någon annan har koll på.

Här är ivf en cut & past beskrivning på hur det går till

OBS! Detta är inget jag testat själv så allt sker på egen risk

file is for cas2,3 and dynamite The new funcion Smartcard -> c*rd Generator!

It will be now possible to erase the exisiting OS on your M2/Platinum c*rd and load a new different OS (like OPOS 1.03 or Titanium2). We are actually working to implement the erasing of other OS c*rd.
Once the c*rd is erased you are ready to load the new OS and you need to know the Transport Code. Cas Studio will set a Transport Code as default which is the most used one but this doens't mean your OS c*rd has that Transport Code.All you do you do it at your own risk!

If you don't know what you are doing simply don't do it! You could permanently damage your c*rd! You have been told! Don't upload files you don't know what they are anyway!

How to use the c*rd Generator?

Do you have a virgin AT90SC6464C?

It will be enought that you insert the Smartcard into the c*rd reader of the Cas Interface 3.
On the c*rd Info you will see the following information:

Status-memory State: 90 00 = Blank c*rd
BootLoader Version: XX XX
Chip Identifier: AT90SC6464C

This means that your Smartcard is blank and ready to be programmed.

Press "Open File" and choose the file you want to load with the extension .OSF
You sohuld see a short description of the kind of file you are loading if available.

Now press the button "Write" to proceed with the OS loading into the c*rd.
At the end of this procedure the ATR will be performed.
Is your Smartcard is not blank (pre-programmed) as OS c*rd?

You have to make sure it's a M2 or Platinum c*rd. Insert the Smartcard into the c*rd reader and the funcion "Erase" will be enabled.
At this point you can press the "Erase" button. Make sure you have the valid Trasport Code otherwise your Smartcard would not be accessible anymore!
Wait util the Smartcard is erased and the new ATR will come up as shown:

Status-memory State: 90 03 = Pre-Programmed c*rd
BootLoader Version: XX XX
Chip Identifier: AT90SC6464C

This means that your Smartcard is blank and ready to be programmed.

Press "Open File" and choose the file you want to load with the extension .OSF
You sohuld see a short description of the kind of file you are loading if available.

Now press the button "Write" to proceed with the OS loading into the c*rd.
At the end of this procedure the ATR will be performed.
About the Transport Code:

for cas2,3 and dynamyte from m11 to opus 1.03 os The Transport Code works almost in the same way as the PIN function of your GSM Sim-c*rd. You need it to access to all the functions of a Blank or erased Smartcard.
Just before programming a blank or Erased Smartcard you will need to present the Trasport Code. If you present the Trasport Code for more than 3 times wrong the c*rd will be permanently blocked and there will be no more possibilities to access to the c*rd anymore!
Set as default there is a Trasport Code which is quite standard. This doens't mean it the correct Trasport Code for your c*rd. Don't erase neither try to program a blank or erased Smartcard if you are not sure about the genuinity of your Transport Code.

And now .... Enjoy!

[massaro carlo]

Jag har frågat samma sak hos flera forum
Nästa gång ska titta först på danskarna download och sen.....
Men tack endå för ditt tips
Ha en bra dag
Carlo