Cardserver med Windows operativsystem ?

[mimmie]

Finns det någon som har en Cardsever (pc) med Windows som operativsystem ???
Linux är säkert hur bra som helst,men är man ingen datanörd och framförallt aldrig pysslat med Linyx,är det inte lätt
Hoppas på ett positivt svar

Mimmie

edit av rejj: överdrivet med tjugo "?"

[Stiffe]

sökt?

[mimmie]

Frågan va!
finns det något allternativ till LINUX om man vill ha en cardserver.(Windows)
Jag förstår att det här är LINUX fantasternas himmel,men man får väl ställa frågan ?

Mimmie

[Snouser]

OT: lägg ner lite tid i stället å lär dej Linux. När du väl kan de så förstår du att de är stabilare när datorn ska stå på 24/7
EDIT: sedan räcker de med 1 utropstecken.

[humlan57]

Det funkar hur bra som helst med "NewCS" till Windows, så det är bara å dra igång en server .

mvh humlan.

[mimmie]

TACK HUMLAN
Efter ditt svar har jag letat efter i ca 1 timme,jag har hittat
newcs-1_beta6,men ingen bra install beskrivning,du vet inte möjligen var man kan hitta en ?

Tack
Mimmie

[humlan57]

TACK HUMLAN
Efter ditt svar har jag letat efter i ca 1 timme,jag har hittat
newcs-1_beta6,men ingen bra install beskrivning,du vet inte möjligen var man kan hitta en ?

Tack
Mimmie

Kolla på www.dreamboxworld.com men det ska finnas med i filerna som laddas ner. Men jag ska försöka få tag på en "manual" av dom som kör NewCS på Windows.

mvh humlan.

[admin]

förstår inte varför du inte tittar i vårt filarkiv först?
http://filer.comhit.net/

newcs ligger under emulatorer...

[Spidde]

Och ALLT står i config filen. Bara att läsa den så funkar det.

[humlan57]

Den här manualen har jag klippt å klistrat från: http://cardsharing.homelinux.com/newcs_setup

--------------------------------------------------------------

Setting up NewCS cardserver

In this document we describe the installation and configuration steps for a NewCS cardserver system. You will need the following software / hardware components for a successful installation:

Linux or Windows XP host (preferred a newer RedHat or any new system)
Cardreader hardware
An active serial port
NewCS archive; You can download it from our site

When everything is ready, follow this step-by-step setup procedure:



Installing the server on a Linux system

Decompress the NewCS archive; You will find various executables in bin directory. We will need only one file for our Intel-based system. It is a newcs.x86. So copy it to your Linux host using FTP. The preferred location varies from system to system. It is usually

/usr/local/bin

Copy the configuration (newcs.xml.phoenix) file into:

/var/tuxbox/config

Rename this file to

newcs.xml

Now, we can start the NewCS server! But wait a moment! It need libcrypto.so.0.9.7! On some systems it is not available in this naming, but check the /lib directory on your system. If you can find a libcrypto.so.0.9.7a or libcrypto.so.0.9.7b or similar file, soft-link to the name we require:

ln /lib/libcrypto.so.0.9.7a /lib/libcrypto.so.0.9.7

Now, will have a required library name in /libs directory. We can start the NewCS server.

Type its name and press enter:

newcs

If You are in currently in a directory where NewCS is installed, type this:

./newcs

If it is running, it will write informations to the screen like this:

[root@celeron root]# newcs
Reading Config file /var/tuxbox/config/newcs.xml
level: normal
type: init
output: all
logger config: level 1 type 3 output 255
log file:
logger: cant open file , file log disabled
udp log: host 192.168.1.10 port 1000
tcp port: 3001
[ 20:14:47 ] [ Box detect ] Box type 1
[ 20:14:47 ] [ Config ] Option <PPV> for device phoenix not present
[ 20:14:47 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 20:14:47 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 20:14:47 ] [ ECM Cache ] Initialising Cache with 10 entries
[ NewCS ] Process id 1871
[ 20:14:47 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:14:47 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:14:47 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:14:47 ] [ Phoenix ] Setting Baud to custom 16129
[ 20:14:47 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 20:14:48 ] [ Loader ] Unknown card
[ 20:14:48 ] [ Loader ] Trying Irdeto (T=14)
[ 20:14:48 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 20:14:48 ] [ Phoenix ] Opening device /dev/ttyS0
[ 20:14:48 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:14:48 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:14:48 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 20:14:50 ] [ Loader ] Unknown card
[ 20:14:50 ] [ NewCS ] Ready to GO!



Ok! Now, find the NewCS process and kill it:

[root@celeron root]# ps ax|grep newcs
1871 pts/2 S 0:00 newcs
1875 pts/2 S 0:00 grep newcs

The process id is 1871, so use the kill comand with this number as its parameter:

[root@celeron root]# kill 1871

Always be sure you are running only a ONE INSTANCE from a NewCS server! Use ps ax | grep newcs command to do this. If You need multiple instances, create configuration files for every instance, and start NewCS with it as a parameter:

[root@celeron root]# newcs /var/tuxbox/config/newcs2.xml

In the previous example You have specified the configuration file You want to use.

With your favorite text editor edit the configuration file to suit your needs. The serial ports on Linux are:

/dev/ttyS0 = COM1
/dev/ttyS1 = COM2
etc.

Find the first <device> tag:



<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>/dev/ttyS0</node>
<mhz>357</mhz>
<parity>none</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<boxid>0000000000</boxid>
<PTShandshake>Yes</PTShandshake> <!-- Set to yes(if wanted) for cryptoworks, Viacess and c
<crypto-special>Yes</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10001</newcamd_port>
<priority>round</priority>
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it.
<id></id>
</deny>
</sid>
</device>




<node> and <newcamd_port> is interesting for us. Specify the serial port (ttySx) on which You have an active cardreader hardware. Also, specify the debug port for the NewCS (starts its numbering from 10001).

Add some users. Find a user tag:

<user>
<name>username1</name>
<password>password1</password>
<au>on</au>
</user>

Modify the <name> and <password> to fit your needs. You can have multiple <user> tags, of course.

<user>
<name>username2</name>
<password>password2</password>
<au>on</au>
</user>
<user>
<name>username3</name>
<password>password3</password>
<au>on</au>
</user>

Kill the runninf NewCS process, and restart it using this newly created configuration file with its parameter:

[root@celeron root]# newcs /var/tuxbox/config/newcs.xml

It will write out the card paramters and other infos. Now, You can connect to this server using NewCAMD, EvoCAMD, MGCAMD, WinCSC and other CAM emulators. Enjoy!



Installing the server on a Windows system

The Windows installation is similar to the unix version. Decompress the following files from the NewCS archive to some directory:

newcs.exe
mingwm10.dll
pthreadGCE2.dll
newcs.xml.dragon

Rename the file

newcs.xml.dragon to newcs.xml

Edit the newcs.xml file. Edit <device> and <user> tags. Now, use COM1 and COM2 etc. instead of ttySx device names for serial ports.

<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>COM1</node>
<mhz>357</mhz>
<parity>none</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<boxid>0000000000</boxid>
<PTShandshake>Yes</PTShandshake> <!-- Set to yes(if wanted) for cryptoworks, Viacess and c
<crypto-special>Yes</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10001</newcamd_port>
<priority>round</priority>
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it.
<id></id>
</deny>
</sid>
</device>




<node> and <newcamd_port> is interesting for us. Specify the serial port (COMx) on which You have a cardreader hardware installed. Also, specify the debug port for the NewCS server (starts its numbering from 10001).

Add some users. Find a user tag:

<user>
<name>username1</name>
<password>password1</password>
<au>on</au>
</user>

Modify the <name> and <password> to fit your needs. You can have multiple <user> tags, of course.

<user>
<name>username2</name>
<password>password2</password>
<au>on</au>
</user>
<user>
<name>username3</name>
<password>password3</password>
<au>on</au>
</user>

Start the newcs.exe from the command prompt.

C:\>newcs

You can test the server connecting to it using NewCAMD, EvoCAMD, MGCAMD, WinCSC and other CAM emulators. Enjoy!
----------------------------------------------------------------

mvh humlan.