Error opening cardreader 0: Device or resource busy

[besa]

Finns det någon mer som har samma problem.
Kör:
DM500c
gemini350
newcamd610b
newcamd config betad
ComHem kort

Filer ser bra ut, va jag vet!

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = cardserv

DEBUG_PORT = 14000

ENTITLEMENT_PORT = 14001

ADMIN_PORT = 14002

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

USER = local local lan 127.0.0.1 12000 au

#USER = spider spider lan 127.0.0.1 15003

DEBUG_INIT = no

DEBUG_NET = no

DEBUG_ECM = no

DEBUG_EMM = no

SERIAL_PORT = 0

TCP_PORT = 10000

#SERIAL_PORT = 1



# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = uds 0 local local

CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

#

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

# send keep alive messages to servers to keep connections from dying by

# unreasonable router NAT timeouts, make sure all cardservers/spiders you

# conntect to are v5.25 or newer, otherwise you'll loose connection to them,

# if set to yes

# seems this feature is commonly misunderstood, it only keeps connections

# open even if no data packets are using it for while (NAT routers tend to

# forget about established tcp connections when they are inactive), it is

# NOT to automatically reconnect to servers, see also Q&A in readme.txt

CWS_KEEPALIVE = no

#

# newcamd admin control options

# (incoming port is the same as CWS_INCOMING_PORT)

#

# <password> <14>

#

ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Tacksam för alla tips

[nicnull]

Prova att telneta in och skriv "ps" innan du startar carderv scriptet.

Om cardserv_6.10b processen syns innan du har startat den så kör en "killall cardserv_6.10b" ett par gånger först tills du får "No such process".

Starta sedan servern med "/var/scripts/newcamd_cardserver_XXX.sh start"
(där XXX är vad nu ditt script heter)

Ska annars funka att välja via blå menyn/ cam/ restart och sedan reboot via "Menu" om det ligger dubblerade processer igång av ngn anledning, men det ger ju inte samma insikt i problemet.

Kan för övrigt rekommendera NewCS som kortserver istället...