DM7025 + NewCS

**fevzi** · 2008-04-13, 09:00

Hej,

Jag har suttit snart i ett dygn och kämpat igenom mgcamd och newcs träsket med Gemini2 3.30 på min Dreambox 7025. (Jag har testat med Pan 1.0 E åxå med samma resultat.)

NewCS vill helt enkelt inte känna igen mitt comhem kort.

Jag är säker på att mina mgcamd inställningar är korrekta då när jag använder min MP3.5 i phoenix läge på min windows dator så fungerar allt. Givetvist sätter jag om ip addressen i conf filen när jag testar på dreamboxens läsare.

Jag har läst om fler som har liknande problem och har även hittat andra trådar i detta forum som belyer samma problem. Men lösningen verkar vara att köra newcs på en linux eller windows dator.

Jag undrar har någon fått igång någon newcs eller annan newcamd demon på din dreambox 7025 med de interna läsarna?

Jag har iof en konfiguration som funger med datorn men jag vill att det fungerar på dreambox 7025 !

Jag skulle uppskatta all hjälp som går att få. Till att börja med, har någon DM7025+ ägare fårr igång newcs? Eller finns ett annat prog som gör motsvarande?

PC: 10.0.0.100
DM7025: 10.0.0.128

Loggar:

newcs 1.19:

Kod:

[ 09:29:30 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 09:29:30 ] [ Sci ] Opening device /dev/sci0
[ 09:29:30 ] [ Sci ] CARD_DETECT for sci returned 1
[ 09:29:45 ] [ Loader ] Reset failed ...
[ 09:29:45 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 09:29:45 ] [ Sci ] Opening device /dev/sci1
[ 09:29:45 ] [ Sci ] CARD_DETECT for sci returned 0
[ 09:29:45 ] [ Sci ] No card present in reader
[ 09:29:45 ] [ Loader ] Reset failed ...

newcs 1.50:

Kod:

[ 09:39:38 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 09:39:38 ] [ Sci ] Opening device /dev/sci0
[ 09:39:49 ] [ Loader ] Clearing all autosids on reader ...
[ 09:39:49 ] [ Loader ] Reset failed ...
[ 09:39:49 ] [ Loader ] Starting Newcamd Server on port 34000
[ 09:39:49 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 09:39:49 ] [ Sci ] Opening device /dev/sci1
[ 09:39:50 ] [ Sci ] No card present in reader
[ 09:39:50 ] [ Loader ] Clearing all autosids on reader ...
[ 09:39:50 ] [ Loader ] Reset failed ...
[ 09:39:50 ] [ Loader ] Starting Newcamd Server on port 34001
[ 09:39:50 ] [ NewCS ] Ready to GO! :)

NewCS.XML (Windows)

Kod:

<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Phoenix Interface on Windows.
-->
<newCSconfig>
 <readers name="Phoenix">
  <device>
   <name>Phoenix Interface</name>
   <type>phoenix</type>
   <mhz>357</mhz>
   <node>COM1</node>
   <parity>odd</parity>
   <reset>normal</reset>
   <export>Yes</export>
   <enabled>Yes</enabled>
   <blocksa>No</blocksa>
   <blockua>No</blockua>
   <blockga>No</blockga>
   <!-- <boxkey>0000000000</boxkey>  -->
   <!-- <rsa>0000000000</rsa> -->
   <irdeto-camkey>0000000000000000</irdeto-camkey>
   <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
   <crypto-special>No</crypto-special>
   <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
   <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
   <PTShandshake>No</PTShandshake>
   <carddetect>yes</carddetect>
   <newcamd_port>15000</newcamd_port>
   <autosid>Yes</autosid>
   <Seca-PPV>no</Seca-PPV>
   <pincode>0000</pincode>
   <priority>round</priority>
  </device>
 </readers>
 <radegastserver>
   <enabled>No</enabled>
   <port>16000</port>
   <allow>
    <hostname>localhost</hostname>
   </allow>
 </radegastserver>
 <cache>
   <emm>20</emm>
   <ecm>-1</ecm>
 </cache> 
 <debug>
   <password>NewCSpwd</password> 
   <level>verbose</level>
   <type>init</type>
   <output>console,tcp</output>
   <console_options>normal,init</console_options>
   <tcp_port>1001</tcp_port>
   <tcp_options>normal,init</tcp_options>
 </debug>
 <newcamdserver>
   <enabled>Yes</enabled>
   <name>newcs</name>
   <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
   <user>
    <name>dummy</name>
    <password>dummy</password>
    <hostname>10.0.0.100</hostname>
    <port>12000</port>
    <au>on</au>
    <sidoverride>off</sidoverride>
    <spider>No</spider>
        <rate>2</rate>
   </user>
 </newcamdserver>
</newCSconfig>

/etc/tuxbox/config/newcs.xml i dm7025

Kod:

<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
        <readers name="Card Readers">
                <device>
                        <name>lower</name>
                        <type>sci</type>
                        <mhz>358</mhz>
<!-- Jag har provat med 600 också -->
                        <node>/dev/sci0</node>
                        <parity>odd</parity>
                        <reset>normal</reset>
                        <export>Yes</export>
                        <enabled>Yes</enabled>
                        <blocksa>No</blocksa>
                        <blockua>No</blockua>
                        <blockga>No</blockga>
                        <!-- <boxkey>0000000000</boxkey>  -->
                        <!-- <rsa>0000000000</rsa> -->
                        <irdeto-camkey>0000000000000000</irdeto-camkey>
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
                        <crypto-special>No</crypto-special>
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
                        <PTShandshake>No</PTShandshake>
                        <carddetect>yes</carddetect>
                        <newcamd_port>34000</newcamd_port>
                        <autosid>Yes</autosid>
                        <Seca-PPV>no</Seca-PPV>
                        <pincode>0000</pincode>
                        <priority>round</priority>
                </device>
                <device>
                        <name>upper</name>
                        <type>sci</type>
                        <mhz>600</mhz>
                        <node>/dev/sci1</node>
                        <parity>odd</parity>
                        <reset>normal</reset>
                        <export>Yes</export>
                        <enabled>Yes</enabled>
                        <blocksa>No</blocksa>
                        <blockua>No</blockua>
                        <blockga>No</blockga>
                        <!-- <boxkey>0000000000</boxkey>  -->
                        <!-- <rsa>0000000000</rsa> -->
                        <irdeto-camkey>0000000000000000</irdeto-camkey>
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
                        <crypto-special>No</crypto-special>
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
                        <PTShandshake>No</PTShandshake>
                        <carddetect>yes</carddetect>
                        <newcamd_port>34001</newcamd_port>
                        <autosid>Yes</autosid>
                        <Seca-PPV>no</Seca-PPV>
                        <pincode>0000</pincode>
                        <priority>round</priority>
                </device>
        </readers>
        <radegastserver>
                        <enabled>No</enabled>
                        <port>16000</port>
                        <allow>
                                <hostname>localhost</hostname>
                        </allow>
        </radegastserver>
        <cache>
                        <emm>20</emm>
                        <ecm>-1</ecm>
        </cache>
        <httpd>
                <server> <!-- Port to accept connections on -->
                        <port>8080</port>
                        <enabled>yes</enabled>
                </server>
                <user>
                        <!-- valid value for userfile are:
                             Any username you'd like - Used for browser to logon (its case sensitive).  -->
                        <name>newcs</name>
                        <!-- valid value for password are:
                             Any password you'd like - Used for browser to logon (its case sensitive).  -->
                        <password>newcs</password>
                        <!-- valid value for accesslevel are:
                             admin, stats - Define what rights the user has in the web-console  -->
                        <accesslevel>admin</accesslevel>
                </user>
        </httpd>
        <debug>
                        <password>NewCSpwd</password>
                        <level>normal</level>
                        <type>init</type>
                        <output>console,tcp</output>
                        <console_options>normal,init</console_options>
                        <tcp_port>1001</tcp_port>
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                        <enabled>Yes</enabled>
                        <name>newcs</name>
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                        <user>
                                <name>dummy</name>
                                <password>dummy</password>
                                <hostname>10.0.0.128</hostname>
                                <port>12000</port>
                                <au>on</au>
                                <sidoverride>off</sidoverride>
                                <spider>No</spider>
        <rate>2</rate>
                        </user>
        </newcamdserver>
</newCSconfig>

/etc/tuxbox/config/newcamd.conf

Kod:

...
# For Windows Confen
#CWS = 10.0.0.100 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = 10.0.0.128 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
#CWS = 10.0.0.128 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
...

/usr/keys/mg_cfg

Kod:

# EMM messages
#    00 don't show any EMM's (default)
#    01 show only valid EMM's
#    02 show valid and bad EMM's with complete data display
M: { 01 }
# ECM messages
#    00 don't show any ECM's
#    01 show only valid ECM's (default)
#    02 show valid and bad ECM's with complete data display
C: { 01 }
# AU
#    01 enable AU
#    02 AU Auto
A: { 01 }
# key update
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
G: { 01 }
# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
N: { 01 }
# network ecm timeout in seconds
K: { 10 }
# newcamd dead routes connect retry, sec
Q: { 15 }
# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 00 }
# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
O: { 00 }
# on screen display Options
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
S: { 03 }
# Log options
#    00 Off
#    01 Network
#    02 console
#    03 both
L: { 02 } 172.16.1.1 28007
# cache ecm pids and data used to open channels,
# store pids in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# use summ
#    00 Off (default)
#    01 Ecm pids cache
#    02 Ecm data cache
#    04 Emm cache for network cards
H: { 07 }
# reread files on zap:
#    00 No (default)
#    01 config (including priority and ignore, but not replace/cache)
#    02 config and keys
#    03 both
R: { 02 }
# debug, use summ
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox 7025
B: { 06 }
# keep ecm cache, seconds
E: { 15 }

/usr/keys/replace.list

Kod:

# replace old with new {{ sid } { caid } { provid } { ecmpid } { newcaid } { newprovid } { newecmpid }}
# multivision 1 example
# R: {{ 515 } { 500 } { 7C00 } { A0 } { 500 } { 7800 } { A1 }}
# OR put this ecm on top if new* = 0
# R: {{ 515 } { 500 } { 7800 } { A1 } { 0 } { 0 } { 0 }}
# replace old caid > newcaid example
X: {{ 624 } { 604 }}

**snake** · 2008-04-13, 11:10

Hej

Sitter kortet i rätt läsare?

Har du kollat så att du har angett rätt namn på läsaren/läsarna

//snake

**fevzi** · 2008-04-13, 13:06

Kortet sitter i läsare sci0.
Loggen för newcs säger inte card missing, vilket den gör ifall jag lägger in kortet upp och ner.

Som namn har jag lower och upper, och det är lower som jag testar med.

Vart finns vettig dokumentation som beskriver namnen?

**hingstin** · 2008-04-14, 08:46

Hejsan
om jag minns rätt så var det så här (kan ej kolla var en kompis 7025:a):

Alltså denna rad HELT BORT:
<mhz>358</mhz>

<device>
<name>upper</name>
<type>Sci</type>
<node>/dev/sci1</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>16001</newcamd_port>
<priority>hard</priority>
<autosid>no</autosid>
<Seca-PPV>no</Seca-PPV>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>

~G

Ämne: DM7025 + NewCS

Ämnesverktyg

Sök ämne

Visa

DM7025 + NewCS

Liknande ämnen

Text i en DM7025 med Pli

Dm7025+

Rensa DM7025

Taggar för det här ämnet

Behörigheter för att posta

stöd oss

Följ oss