Detta var lösningen för 600 boxen. Borde vara samma grund gränssnitt för 800:an


"Thanks a million! The box flashed successfully after enabling and disabling the Use Network tick box before starting the flash. It is no longer a brick!

To others out there who are using DreamUP to flash a 600PVR (and possibly others?) that was bricked like mine (no web or telnet interface) make sure your host PC has a configured network interface *even if* you have the "Use Network" box unticked* (thinking that it would then only use the null modem serial cable). There seems to be something in DreamUP that causes it to fail with the errors I was getting if you have the Use Network box unticked if the PC doesn't have a valid network interface configured..."


Och för 7025an
Kan också vara att boxen inte är på samma subnät som datorn du flashar ifrån, båda måste tex antingen ha en 192.168.0.x eller 192.168.1.x adress