Citat Ursprungligen postat av Eklundh Visa inlägg
Provade denna lösning på en DM600PVR och det fungerade inte för mig :'(

Men det gav mig åtminstone hopp =)

Har Ni liknande problem så föreslår jag er att prova det, vem vet Ni kanske har lite mer tur.

Har ett tipps om det inte fungerar med Dreamupp och nollmodemkabel.

************************************************** ************

[FONT=Tahoma]1. Boot your DM600, goto the communication menu and note the ip address.
***note: this is the original IP of the box....192.168.0.5 or similar***

2. Run DCC, connect to the dreambox. Once the network is connected ok, click on the the 'Telnet' option.

3. In the telnet window, type the following, pressing <return> at the end of each line.

mount /boot -o remount,rw
rm /boot/*
reboot

4. You should now get a message saying that the Dreambox is rebooting.

5. Wait a few seconds and then run Explorer (Firefox or whatever) and enter the ip address of the Dreambox in the address bar.

6. On the screen that appears, choose the 'Upgrade firmware' option, find the .nfi file and click the 'Flash' button.

7. Once the progress bar reaches 100%, reboot the box[/FONT]
************************************************** *****

Alternativ.
1-Notera ip nr boxen fått
2-Stoppa i strömkabeln samtidigt med power on/off knappen på framsida på boxen intryckt
3-Fortsätt från punkt 4 ovan.

************************************************** *****