Mythtv + sasc-ng + newcs

[jolaren]

Jag har fastnat här:
LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:2 -j 1:4 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles

Vad är felet?

root@undin:/usr/local/src/sc/contrib/sasc-ng# LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:4 -j 0:4 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles
Mar 15 00:31:36.802 : Adapter 0 is already in use


root@undin:/usr/local/src/sc/contrib/sasc-ng# LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:1 -j 1:2 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles

Mar 15 00:37:21.534 frontend: Could not open /dev/dvb/adapter1/frontend1. Error was: 2
Open failed
: No such file or directory


Får igång allt med en tuner (förutom att kunna se kanaler då)
root@undin:/usr/local/src/sc/contrib/sasc-ng# LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:2 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles

/usr/sbin/newcs.x86_64

[jolaren]

Finns det något mer jag kan ge er?

[ 01:11:20 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 01:11:20 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 01:11:20 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 01:11:20 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 01:11:20 ] [ Newcamd ] Server name : cardserver
[ 01:11:20 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 01:11:20 ] [ Newcamd ] User 2: myth, Pass: myth, Host , Port: 0, Au: On, Spider allowed: No, Sidoverride: Yes, level: 0
[ 01:11:20 ] [ Newcamd ] User 3: TestUser, Pass: TestPassword, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: $
[ 01:11:20 ] [ httpd ] httpd-user: admin, password: newcs, accesslevel: admin
[ 01:11:20 ] [ EMM Cache ] Initialising dynamic Cache
[ 01:11:20 ] [ ECM Cache ] Initialising dynamic Cache
[ 01:11:20 ] [ Loader ] Starting Telnet on port 0
[ 01:11:20 ] [ Loader ] Started HTTP-server on port: 8080
[ 01:11:20 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 01:11:20 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 01:11:20 ] [ Phoenix ] Setting Parity to: ODD
[ 01:11:20 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 01:11:20 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:11:21 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 01:11:22 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 01:11:22 ] [ ATR ] Historical bytes: [C2] [14] [00] [C1] h [90] [00]
[ 01:11:22 ] [ Loader ] Init Viaccess card
[ 01:11:22 ] [ Phoenix ] Setting Parity to: ODD
[ 01:11:22 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 01:11:22 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 0 on Provider 000000 for caid 0500 ID=0
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider FFF510 for caid 0500 ID=0
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023200 for caid 0500 ID=1
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023210 for caid 0500 ID=2
[ 01:11:24 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023220 for caid 0500 ID=3
[ 01:11:24 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023230 for caid 0500 ID=4
[ 01:11:24 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023240 for caid 0500 ID=5
[ 01:11:24 ] [ Loader ] Card 0500 on port /dev/ttyUSB0 ready
[ 01:11:24 ] [ Loader ] Starting Newcamd Server on port 10000
[ 01:11:24 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 01:11:24 ] [ NewCS ] Ready to GO!
[ 01:12:27 ] [ httpd ] User admin logged in..

och i /etc/camfiles har jag skapat filen cardclient.conf med följande rad i:
newcamd:adress:10000:1/0500:myth:myth:0102030405060708091011121314

[jolaren]

Efter lite meck kom även detta upp i newcs loggen
[ 01:16:44 ] [ Config ] Successfully backed up file: /etc/newcs.xml, to: /tmp/newcs.xml-bck-1804289383
[ 01:16:44 ] [ Config ] Changes written to config (/etc/newcs.xml)
[ 01:16:52 ] [ Config ] Successfully backed up file: /etc/newcs.xml, to: /tmp/newcs.xml-bck-846930886
[ 01:21:15 ] [ Newcamd:10000 ] Connection from ip
[ 01:21:15 ] [ Newcamd:10000 ] User myth logged in, client: Generic

[Plow]

borde det inte vara 0:2 och 1:3

[jolaren]

borde det inte vara 0:2 och 1:3

Möjligt.. jag la in det i init scriptet nu och testar på det viset..

En av errorsen som jag tänker på nu är
Mar 15 12:35:14 undin sasc-ng: [2325] [general.error] failed open
/etc/camfiles//smartcard.conf: No such file or directory
Mar 15 12:35:14 undin sasc-ng: [2325] [general.error] failed open
/etc/camfiles//cardslot.conf: No such file or directory
Mar 15 12:35:14 undin sasc-ng: [2325] [general.error] failed open

Varför letar den efter "//"?
cardclient.conf ligger där och ecm vad den nu heter men inte smartcard lr cardslot


nu blir det såhär vid vaje scanning i mythtv

[ 13:24:01 ] [ Newcamd:10000 ] User myth logged in, client: Generic
[ 13:24:02 ] [ Phoenix ] Failed to read echo (res=0, size=5)
[ 13:24:02 ] [ Loader ] Reinit card with caid 0500

[Plow]

Att den kollar efter de filerna gör inget bara den kan läsa cardclient.conf

Att läsaren resetar är inte bra. Får den tillräckligt med ström ?

[jolaren]

Den sitter i en usb slot.. ska testa att flytta den till front usb ist.
<mhz>357</mhz>

Vad finns det för andra altenativ? Köpa en usb hub som går på ström?

[Plow]

Den sitter i en usb slot.. ska testa att flytta den till front usb ist.
<mhz>357</mhz>

Vad finns det för andra altenativ? Köpa en usb hub som går på ström?

357mhz blir bra
Japp

[jolaren]

borde det inte vara 0:2 och 1:3

Nu när jag fått allt att fungera tänkte jag köpa ett till identiskt kort.

Då lägger jag bara till 2:4 och 3:5 i sasc-ng så kommer allt att fungera klockrent?

[Plow]

du måste ändra num_adapters=2 till 4 också när du laddar modulen
Nej. det borde bli 0:4 1:5 2:6 3:7 då de virtuella kommer efter de riktiga

Här finns också hjälp att få: http://www.minhembio.com/forum/index.php?showforum=118