Mythtv + sasc-ng + newcs

[jolaren]

Har för tillfället bara ett pci kort i datorn men jag får för livet av mig inte igång de krypterade kanalerna. Så sjukt irriterande.

De guiderna jag följt är:
http://wiki.slackware.se/index.php/CardShare_Server
http://dolot.kipdola.com/wiki/Install_SASC-NG

Har följt båda guiderna till punkt och pricka men jag får inte igång det.
Är det något jag kan ge er för att kunna få hjälp? Typ?

Kör såklart boxer med en phoenix läsare, ett dvb-t kort (hauppage wintv nova-t 500 pci)
och Mythbuntu

[Plow]

vad är det som inte fungerar ?
Posta loggar

[jolaren]

Är på jobbet så kan inte kolla härifrån. Jag vet var newcs log filen ligger men har inte lyckats hitta någon för sasc-ng.. Allt ser "bra" ut.. Allt kompilerar och körs men inga kanaler..

[jolaren]

Jag ska göra en helt ny installation ikväll. Då med ubuntu server + frontend. Kör allt från scratch.
Vad tycker ni man ska använda? Newcs + Sasc-ng + Mythtv eller ska man använda något annat?

[Plow]

Det blir bra

[jolaren]

Det blir bra

Nu har jag precis brännt ner ubuntu server på usb.
Finns det några andra guider som är bättre eller är de som jag länkade fullt funktionabla?
Jag kör nu och är antagligen klar med server installationen om 20 min

[jolaren]

Jag har fastnat här:
LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:2 -j 1:4 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles

Vad är felet?

root@undin:/usr/local/src/sc/contrib/sasc-ng# LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:4 -j 0:4 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles
Mar 15 00:31:36.802 : Adapter 0 is already in use


root@undin:/usr/local/src/sc/contrib/sasc-ng# LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:1 -j 1:2 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles

Mar 15 00:37:21.534 frontend: Could not open /dev/dvb/adapter1/frontend1. Error was: 2
Open failed
: No such file or directory


Får igång allt med en tuner (förutom att kunna se kanaler då)
root@undin:/usr/local/src/sc/contrib/sasc-ng# LD_LIBRARY_PATH=/usr/local/src/sc/contrib/sasc-ng/sc/PLUGINS/lib/ ./sasc-ng -j 0:2 --cam-budget --sid-nocache -d 0xf0a --cam-dir /etc/camfiles

/usr/sbin/newcs.x86_64

[jolaren]

Finns det något mer jag kan ge er?

[ 01:11:20 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 01:11:20 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 01:11:20 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 01:11:20 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 01:11:20 ] [ Newcamd ] Server name : cardserver
[ 01:11:20 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 01:11:20 ] [ Newcamd ] User 2: myth, Pass: myth, Host , Port: 0, Au: On, Spider allowed: No, Sidoverride: Yes, level: 0
[ 01:11:20 ] [ Newcamd ] User 3: TestUser, Pass: TestPassword, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: $
[ 01:11:20 ] [ httpd ] httpd-user: admin, password: newcs, accesslevel: admin
[ 01:11:20 ] [ EMM Cache ] Initialising dynamic Cache
[ 01:11:20 ] [ ECM Cache ] Initialising dynamic Cache
[ 01:11:20 ] [ Loader ] Starting Telnet on port 0
[ 01:11:20 ] [ Loader ] Started HTTP-server on port: 8080
[ 01:11:20 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 01:11:20 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 01:11:20 ] [ Phoenix ] Setting Parity to: ODD
[ 01:11:20 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 01:11:20 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:11:21 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 01:11:22 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 01:11:22 ] [ ATR ] Historical bytes: [C2] [14] [00] [C1] h [90] [00]
[ 01:11:22 ] [ Loader ] Init Viaccess card
[ 01:11:22 ] [ Phoenix ] Setting Parity to: ODD
[ 01:11:22 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 01:11:22 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 0 on Provider 000000 for caid 0500 ID=0
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider FFF510 for caid 0500 ID=0
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023200 for caid 0500 ID=1
[ 01:11:23 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023210 for caid 0500 ID=2
[ 01:11:24 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023220 for caid 0500 ID=3
[ 01:11:24 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023230 for caid 0500 ID=4
[ 01:11:24 ] [ KeymaN ] Adding key 000000be7ada6e type 1 on Provider 023240 for caid 0500 ID=5
[ 01:11:24 ] [ Loader ] Card 0500 on port /dev/ttyUSB0 ready
[ 01:11:24 ] [ Loader ] Starting Newcamd Server on port 10000
[ 01:11:24 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 01:11:24 ] [ NewCS ] Ready to GO!
[ 01:12:27 ] [ httpd ] User admin logged in..

och i /etc/camfiles har jag skapat filen cardclient.conf med följande rad i:
newcamd:adress:10000:1/0500:myth:myth:0102030405060708091011121314

[jolaren]

Efter lite meck kom även detta upp i newcs loggen
[ 01:16:44 ] [ Config ] Successfully backed up file: /etc/newcs.xml, to: /tmp/newcs.xml-bck-1804289383
[ 01:16:44 ] [ Config ] Changes written to config (/etc/newcs.xml)
[ 01:16:52 ] [ Config ] Successfully backed up file: /etc/newcs.xml, to: /tmp/newcs.xml-bck-846930886
[ 01:21:15 ] [ Newcamd:10000 ] Connection from ip
[ 01:21:15 ] [ Newcamd:10000 ] User myth logged in, client: Generic

[jolaren]

[ 01:24:45 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=00
[ 01:24:45 ] [ Newcamd ] ECM -> myth (OK) [CAID 0000] [Prov 00000000] [SID 047E]
[ 01:24:46 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=40
[ 01:24:46 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 0488]
[ 01:24:46 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 0488]
[ 01:24:46 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=00
[ 01:24:46 ] [ Newcamd ] ECM -> myth (OK) [CAID 0000] [Prov 00000000] [SID 0488]
[ 01:24:50 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=40
[ 01:24:50 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 04C4]
[ 01:24:50 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 04C4]
[ 01:24:50 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=00
[ 01:24:50 ] [ Newcamd ] ECM -> myth (OK) [CAID 0000] [Prov 00000000] [SID 04C4]

[ 01:24:34 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=40
[ 01:24:34 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 046A]
[ 01:24:34 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 046A]
[ 01:24:34 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=00
[ 01:24:34 ] [ Newcamd ] ECM -> myth (OK) [CAID 0000] [Prov 00000000] [SID 046A]
[ 01:24:38 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=40
[ 01:24:38 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 0474]
[ 01:24:38 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 0474]
[ 01:24:38 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=00
[ 01:24:38 ] [ Newcamd ] ECM -> myth (OK) [CAID 0000] [Prov 00000000] [SID 0474]
[ 01:24:42 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=40
[ 01:24:42 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 047E]
[ 01:24:42 ] [ Newcamd ] ECM -> myth (NOT OK) [CAID 0000] [Prov 00000000] [SID 047E]
[ 01:24:42 ] [ Viaccess ] foundECM=1 Sw0=90 Sw1=00
[ 01:24:42 ] [ Newcamd ] ECM -> myth (OK) [CAID 0000] [Prov 00000000] [SID 047E]


Nu får jag:
[ 01:54:23 ] [ Newcamd:10000 ] Connection from ip
[ 01:54:23 ] [ Newcamd:10000 ] User myth logged in, client: Generic
[ 01:56:00 ] [ Phoenix ] Failed to read echo (res=0, size=5)
[ 01:56:00 ] [ Loader ] Reinit card with caid 0500

Det ser bra ut tills jag ska göra en kanalsökning:
Då hänger sig Newcs och visar följande i loggen
[ 04:24:21 ] [ Phoenix ] Failed to read echo (res=0, size=5)
[ 04:24:21 ] [ Loader ] Reinit card with caid 0500

Jag ändradew även
newcamd:adress:10000:1/0500:myth:myth:0102030405060708091011121314
till
newcamd:adress:10000:0/0500:myth:myth:0102030405060708091011121314
fast utan något bra resultat..



EDIT:

Nu blir alla bra förutom två.. dvs alla förutom två blir såhär

[ 01:24:34 ] [ Newcamd ] ECM -> myth (OK) [CAID 0000] [Prov 00000000] [SID 046A]

De andra två blir > not ok.

När jag försöker lira i Mythtv-frontend så får jag "Partial Lock"

Vad kan jag göra för att få detta att fungera?