Pairing Canal Digital

[Leatherface]

grejen är den att dom har CD boxar Sagem HD ITSD81 funkar klokrent för dom

så tell me varför?

Smartwi klonar ju kortet så boxen vet inte skillnaden om det är riktiga kortet eller smartwi kortet du stoppar i.

[juppe]

Det funkar även med alex mot Sagem HD ITSD81, så det är inte bara smartwi som funkar.

[Leatherface]

CD's HD kanaler funkar på alla satellit HD-boxar med Conax stöd...

Ja men CD's mottagare och CA moduler pairas det till men det funkar i andra boxar.

[johanml]

är inte CD kortet låst till boxens serie nr? altså paring

[wildone]

Nope

[Leatherface]

Ja det är låst till boxens serienummer men bara på deras egna boxar.
Det hindrar inte användning av kortet i Dreambox eller andra boxar för det måste dom slå på chippairing och det har dom inte gjort än. Fast det problemet löser ju deras pairing CA moduler.

[Stefan60]

Fast det problemet löser ju deras pairing CA moduler.

Den där pairing-modulen verkar ju vara ci+ , och verkar ju bara funka i dom godkända Samsung-TVna, eller har du hört något annat?

[Pem]

Är det någon som vet med säkerhet att Strong CAM:en är Ci+?

Om den är det, är det någon som känner till vilka DVB-S2 tv kort som stödjer Ci+

/P

[Pem]

Svarar mig själv i denna fråga, nedan kan ni följa min konversation med Strong:

"No it is not CI+, this is fist for the next model. There is no time frame for this yet but under development.

Med venlig hilsen / Best regards
Jesper Sørensen
Nordic Product Manager
STRONG Scandinavia A/S
________________________________________
Fra: Peter [mailto: ]
Sendt: 20. september 2010 10:19
Til: Jesper Sørensen
Emne: SV: A question about the Canal Digital Conax Strong CAM

So the CAM is not Ci+?

Mvh
Peter

Från: Jesper Sørensen [mailto:jsorensen@strong.tv]
Skickat: den 20 september 2010 09:18
Till: Peter
Ämne: SV: A question about the Canal Digital Conax Strong CAM

Hi Peter
CI+ platform is under development at the moment but not ready yet.

Med venlig hilsen / Best regards
Jesper Sørensen
Nordic Product Manager
STRONG Scandinavia A/S
________________________________________
Fra: Peter [mailto: ]
Sendt: 20. september 2010 08:50
Til: Jesper Sørensen
Emne: SV: A question about the Canal Digital Conax Strong CAM

Hello again.
I just have one more question for you. Could you please tell me if the Canal Digital Strong Pairing CAM for DVB-S2 is a CI+ CAM?

Best Regards
Peter

Från: Jesper Sørensen [mailto:jsorensen@strong.tv]
Skickat: den 8 september 2010 09:33
Till: Peter
Ämne: SV: A question about the Canal Digital Conax Strong CAM

Hi Peter

I spoke with the manufacturer and we can unfortunately not make any guarantees. This has not been tested. And the test is very expensive and long.
No the professional CAM is not the CAM for Canal Digital, this is for multi users systems. used for big cable systems,

Med venlig hilsen / Best regards
Jesper Sørensen
Nordic Product Manager
STRONG Scandinavia A/S
________________________________________
Fra: Peter [mailto: ]
Sendt: 7. september 2010 13:26
Til: Jesper Sørensen
Emne: SV: A question about the Canal Digital Conax Strong CAM

Hello and thanks for you answer.

What I would like to know is if I could use your CAM, that you have provided to CanalDigital here in Sweden and supports CanalDigital pairing, in a DVB-S2 dualtuner TV tuner card fitted in a PC. So that I could look at one channel while recording another channel. For that to be possible with only one CAM running against a Dualtuner DVB-S2 card, the CAM has to be able to decrypt more than one transponder at the same time.
But this professional CAM he mentions, is that the CAM you have provided to CanalDigital that supports pariring and that works in TV sets with a built in CI interface for Sattelite, or is it another CAM?
Hope you understand what I am looking to find out 
The TV card I would like to buy is these cards: http://www.dvbshop.net/index.php/cat...l-Devices.html

Best Regards
Peter

Från: Jesper Sørensen [mailto:jsorensen@strong.tv]
Skickat: den 7 september 2010 13:09
Till: Peter
Ämne: SV: A question about the Canal Digital Conax Strong CAM

Hi Peter

Sorry for my late answer.
Please see the below answer from the manufacturer.

""Dear Jesper,
I think you have tested our professional CAM which can descramble multi-channels in one transponder,there is a bit difference in multi-transponders,we haven’t tested this situtation,I want to analyse the stream,could you help to record the streams of all the transponder which need to descramble?and could you tell me the model number of IRD/STB?
Can I ask what this is for?""

Med venlig hilsen / Best regards
Jesper Sørensen
Nordic Product Manager
STRONG Scandinavia A/S
________________________________________
Fra: Peter [mailto: ]
Sendt: 1. september 2010 15:03
Til: Jesper Sørensen; support_dk
Emne: A question about the Canal Digital Conax Strong CAM

Hi.

I have a question regarding how many MTD the CAM can decrypt? (MTD = Multi Transponder Decrypting ist a new technology, to decrypt up to 4 TV channels with only one CAM (depends on CAM manufacturer)
Is it possible to use this CAM with a Dual Tuner DVB-S2 card?

Best Regards
Peter

[Pem]

Detta innebär ju att det bör fungera med Strong CAM:en i typ ett TerraTech Cinergy S2 HD Ci tv kort.

/P