Newcs Viasat

[patrik1972]

Tack minime

Jag får igång newcs, nu återstår det att lägga in mgcamd 1.30d.
Är det bara att ladda ner och installera 1.31 sen läsa över 1.30d med ändrat namn till 1.31?

Ingen hajare på detta men man lär sig.
Tackar för all hjälp

[patrik1972]

**************************
* *
* The Gemini Project *
* *
**************************
OpenDreambox 4.6.0 dm600pvr
dm600pvr login: root
root@dm600pvr:~> /var/bin/newcs_1.67
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:56:06
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: XXXXXXX
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 12:36:27 ] [ Box detect ] Box type 2 (Dream Multimedia (PPC) Box)
[ 12:36:27 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO
[ 12:36:27 ] [ Config ] Value in <ipk> for device 0 (lower) is INVALID, skipping...
[ 12:36:27 ] [ Config ] Value in <ucpk> for device 0 (lower) is INVALID, skipping...
[ 12:36:27 ] [ Config ] Pincode for device 0 (lower): 0000
[ 12:36:27 ] [ Config ] /dev/sci0 ECM priority: round
[ 12:36:27 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 12:36:27 ] [ EMM Cache ] Initialising dynamic Cache
[ 12:36:27 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 714
[ 12:36:27 ] [ Loader ] Starting Telnet on port 1001
[ 12:36:27 ] [ Loader ] Started HTTP-server on port: 8080
[ 12:36:27 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 12:36:27 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 12:36:27 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 12:36:27 ] [ Sci ] resetting card now
[ 12:36:27 ] [ Sci ] Reset
[ 12:36:27 ] [ Sci ] Card reset
[ 12:36:28 ] [ ATR ] T=0 1etu=372.00us Guardtime:14etu WWT:9600etu
[ 12:36:28 ] [ ATR ] Historical bytes: A [B0] [03] i [FF] J P [F0] [80] [00] V T [03]
[ 12:36:28 ] [ Loader ] Init NDS card
[ 12:36:29 ] [ KeymaN ] Adding key XXXXXXXXXXXX type 0 on Provider 000000 for caid 093E ID=0
[ 12:36:29 ] [ KeymaN ] Adding key XXXXXXXXXXXX type 1 on Provider 000000 for caid 093E ID=0
[ 12:36:30 ] [ Loader ] Card 093E on port /dev/sci0 ready
[ 12:36:30 ] [ Loader ] Starting Newcamd Server on port 15009
[ 12:36:30 ] [ NewCS ] Ready to GO!
root@dm600pvr:~> [ 12:36:30 ] [ Newcamd ] Newcamd thread Server started on port 15009
newcamd: main loop
[ 12:36:51 ] [ Newcamd:15009 ] User XXXXX logged in, client: Mgcamd
[ 12:36:56 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:36:57 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:36:58 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:36:59 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:37:01 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]

detta får jag när jag ansluter med 1.35a.

[Plow]

Det borde räcka med att ftpa upp 1.30d och skriva över 1.35 binären.

Sätt kortet i originalboxen så att det uppdaterar sig. Sedan bör det fungera

[patrik1972]

Tack alla för ett underbart forum
Jag har fått bild utan små uppehåll.
tack än en gång.