**************************
* *
* The Gemini Project *
* *
**************************
OpenDreambox 4.6.0 dm600pvr
dm600pvr login: root
root@dm600pvr:~> /var/bin/newcs_1.67
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:56:06
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: XXXXXXX
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 12:36:27 ] [ Box detect ] Box type 2 (Dream Multimedia (PPC) Box)
[ 12:36:27 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO
[ 12:36:27 ] [ Config ] Value in <ipk> for device 0 (lower) is INVALID, skipping...
[ 12:36:27 ] [ Config ] Value in <ucpk> for device 0 (lower) is INVALID, skipping...
[ 12:36:27 ] [ Config ] Pincode for device 0 (lower): 0000
[ 12:36:27 ] [ Config ] /dev/sci0 ECM priority: round
[ 12:36:27 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 12:36:27 ] [ EMM Cache ] Initialising dynamic Cache
[ 12:36:27 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 714
[ 12:36:27 ] [ Loader ] Starting Telnet on port 1001
[ 12:36:27 ] [ Loader ] Started HTTP-server on port: 8080
[ 12:36:27 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 12:36:27 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 12:36:27 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 12:36:27 ] [ Sci ] resetting card now
[ 12:36:27 ] [ Sci ] Reset
[ 12:36:27 ] [ Sci ] Card reset
[ 12:36:28 ] [ ATR ] T=0 1etu=372.00us Guardtime:14etu WWT:9600etu
[ 12:36:28 ] [ ATR ] Historical bytes: A [B0] [03] i [FF] J P [F0] [80] [00] V T [03]
[ 12:36:28 ] [ Loader ] Init NDS card
[ 12:36:29 ] [ KeymaN ] Adding key XXXXXXXXXXXX type 0 on Provider 000000 for caid 093E ID=0
[ 12:36:29 ] [ KeymaN ] Adding key XXXXXXXXXXXX type 1 on Provider 000000 for caid 093E ID=0
[ 12:36:30 ] [ Loader ] Card 093E on port /dev/sci0 ready
[ 12:36:30 ] [ Loader ] Starting Newcamd Server on port 15009
[ 12:36:30 ] [ NewCS ] Ready to GO!
root@dm600pvr:~> [ 12:36:30 ] [ Newcamd ] Newcamd thread Server started on port 15009
newcamd: main loop
[ 12:36:51 ] [ Newcamd:15009 ] User XXXXX logged in, client: Mgcamd
[ 12:36:56 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:36:57 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:36:58 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:36:59 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]
[ 12:37:01 ] [ Newcamd ] ECM -> XXXXX (NOT OK) [CAID 093E] [Prov 00000000] [SID 09F6]

detta får jag när jag ansluter med 1.35a.