Lägga till klienter i mgcamd/newcs?

[Guztav]

Såhär blir svaret från klienten på mgcamd

tuxbox mgcamd v1.31 by mixvt (compiled Oct 29 2008 19:10:42)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:1
2.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dreambox

/dev/dvb/card0/ca0 error 16: Device or resource busy
Conax.Key error 2: No such file or directory
Keys readed
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = box2:****.dyndns.org:34000 server newcs
newcamd keep alive: 300, incoming port: 21000
network port 21000 open: bind error 98: Address already in use

[mgcam] emm thread started
[mgcamd] tps update started.
/var/keys/tps.bin error 2: No such file or directory
[newcamd] Connecting to ****.dyndns.org:34000...
[newcamd] Login to ****.dyndns.org:34000 as box2 failed (2ms)


svaret från servern på newcs:

18:41:54 ] [ Loader ] Reset failed ...
18:41:54 ] [ Loader ] Reader type 5 on node /dev/sci0
18:41:54 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
18:41:54 ] [ Sci ] Opening device /dev/sci0
18:41:54 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]

Mja, inte verkar det vara som det ska riktigt, men vad kan vara fel??

[Minime]

Ni har två fel. dels så startar int newCS, då den int klarar att reseta kortet.
Och Klienten (MgCamd) lyckas int ansluta till NewCS. Detta dock beror på att newCS aldrig startar på Servern.

Detta beror på troligen att newcs.xml är käpprätt åt H**te konfigurerad...
Den bör se ut i stil med:

<newCSconfig>
   <readers name="Card Readers">
      <device>
      <name>lower</name>
      <type>sci</type>
      <mhz>357</mhz>
      <node>/dev/sci0</node>
      <parity>odd</parity>
      <reset>normal</reset>
      <export>Yes</export>
      <enabled>Yes</enabled>
      <blocksa>No</blocksa>
      <blockua>No</blockua>
      <blockga>Yes</blockga>
      <crypto-special>No</crypto-special>
      <PTShandshake>No</PTShandshake>
      <carddetect>yes</carddetect>
      <newcamd_port>34000</newcamd_port>
      <autosid>Yes</autosid>
      <Seca-PPV>no</Seca-PPV>
      <pincode>0000</pincode>
      <priority>round</priority>
      </device>
    </readers>
   <radegastserver>
      <enabled>No</enabled>
      <port>16000</port>
      <allow>
         <hostname>localhost</hostname>
      </allow>
   </radegastserver>
   <cache>
      <emm>20</emm>
      <ecm>-1</ecm>
   </cache>
   <httpd>
      <server>
         <port>8080</port>
         <enabled>yes</enabled>
      </server>
      <user>
         <name>newcs</name>
         <password>newcs</password>
         <accesslevel>admin</accesslevel>
      </user>
   </httpd>
   <debug>
      <password>NewCSpwd</password>
      <level>normal</level>
      <type>init</type>
      <output>console,tcp</output>
      <console_options>normal,init</console_options>
      <tcp_port>1001</tcp_port>
      <tcp_options>normal,init</tcp_options>
   </debug>
   <newcamdserver>
      <enabled>Yes</enabled>
      <name>newcs</name>
      <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
      <user>
         <name>box1</name>
         <password>*****</password>
         <au>on</au>
         <sidoverride>off</sidoverride>
         <spider>No</spider>
         <rate>2</rate>
      </user>
      <user>
         <name>box2</name>
         <password>*****</password>
         <rate>2</rate>
      </user>
   </newcamdserver>
</newCSconfig>