Resultat 1 till 1 av 1

Ämne: VuCC VU+ Control Centre Version 0.1 Beta

  1. #1
    Seniormedlem nicolitos avatar
    Reg.datum
    Nov 2006
    Inlägg
    763
    Tackad
    50 gånger

    VuCC VU+ Control Centre Version 0.1 Beta



    VU+ Control Centre Version 0.1 Beta by Lee Hudson - Goldwafers.com

    Known Bug:
    Media Files Manager

    Transferring MKV files over 2GB causes the Progress Bar to become inaccurate.
    Don't worry if the progress bar gets to 100% goes blank and the "Please wait file message"
    still appears.
    Just leave the app running as it's still transferring the file. Once the file has completed
    transferring you'll see the filename appear in the Remote or Local file list window respectively.
    It can take a while to complete if your uploading or downloading a very large MKV file.
    --------------------------------------------------------------------------------------------------------------------------------------
    A quick VuCC Video guide is available on Youtube
    _http://www.youtube.com/watch?v=2wvopTTwmhY
    --------------------------------------------------------------------------------------------------------------------------------------

    Installation Instructions
    ------------------------------------
    Unzip all the files and folders in the zip file to your local hard drive.


    How to Use VUCC
    -----------------------------
    1. Run the VUCC.exe application.
    2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
    3. If you have changed the password on your receiver, enter the password in the password field
    otherwise leave blank.
    4. Click Connect Button


    Telnet
    ---------
    Self explanatory.
    For a list of Busybox commands check out the following website:
    _http://www.busybox.net/downloads/BusyBox.html


    FTP
    ----
    Click the FTP Button.
    This will load FileZilla FTP Client and automatically connect to your Vu+
    For instructions on using FileZilla check out the following website:
    _http://wiki.filezilla-project.org/Using


    Settings Backup
    -------------------------
    Click on Settings Backup Button.
    Click the Backup Settings Button.
    This will backup all the settings from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
    The /enigma2 and /tuxbox folders will be located in the same folder as this program.

    Click the Restore Vu+ Settings Button.
    All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
    Once the files have successfully been restored you'll need to reboot the receiver by powering off
    and on using the switch on the back of the receiver.


    Media Files Manager
    ---------------------------------
    Uploading a Media File.
    Select the Hard Drive and folder that contains your Media File.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Local file you want to upload so it's highlighted in blue.
    Click the Upload Button to transfer the file from your local HDD to the Vu+.

    Downloading a Media File.
    Select the Hard Drive and folder that you wish the file to be transferred too.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Remote file you want to download so it's highlighted in blue.
    Click the Download Button to transfer the file from the Vu+ to your local HDD.

    Deleting Local File
    Select Local file so it's highlighted in blue.
    Click Delete Local File Button.

    Deleting Remote File
    Select remote file so it's highlighted in blue.
    Click Delete Remote File Button.


    Vu+ HDD Manager
    ------------------------------
    To mount and format a Hard Disk Drive do the following:
    Select the receiver type and Hard Disk type.
    Click the Format Button.

    This will erase all the data on the Vu+ HDD.

    Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD.
    You'll see a command prompt like the one below when the format has completed.

    root@bm750>


    Vu+ WebControl
    ---------------------------
    Click the Vu+ WebControl Button to open Vu+ WebControl in your default web browser.


    Kind Regards

    Lee.
    Goldwafers.com

    To keep informed on new developments follow us on Twitter:
    _http://twitter.com/goldwafers

    Released 16-9-2010
    Bifogade bilder Bifogade bilder
    Raspberry Pi /Smargo+ reader
    Oscam server
    MOVISTAR+ Premium Extra
    Canal Digital Familjepaketet
    Vu+ Duo2 och Vu+ Solo2
    Toroidal 90-30W-1W-13E-16E-19,2E-23,5E-28,5E
    [/h]

Liknande ämnen

  1. Shape HTPC remote control
    Av rogerd i forum Hårdvara
    Svar: 0
    Senaste inlägg: 2009-01-29, 19:42
  2. script control
    Av Lollo i forum Canal Digital
    Svar: 2
    Senaste inlägg: 2004-03-14, 18:06

Taggar för det här ämnet

Behörigheter för att posta

  • Du får inte posta nya ämnen
  • Du får inte posta svar
  • Du får inte posta bifogade filer
  • Du får inte redigera dina inlägg
  •  
stöd oss
ComHit.net är en ideell sidan som drivs helt utan reklamintäkter, detta för att du som användare ska slippa all störande reklam och diskutera de saker du är intresserad av.
Skulle man däremot känna att man vill donera en slant för att hjälpa ComHit.net att bli bättre är ni välkomna att donera via länken nedan.

https://www.paypal.me/comhit/
Följ oss