Firedtv och softcam

[wba]

Hittade ha ci under dvbserver måste man ha igång den. Jag har ju en separat server.
Har även döpt om smartcard.conf eftersom jag läste någonstans att jag inte behövde den när jag körde mot separat server. Klistrar in loggen från acam.
Någon kunnig som kan se något fel?

15:57:17.750: ACamd v0.6.1.8
15:57:18.390: systems: registering CA system Cardclient, pri -15, ident 1000
15:57:18.390: structloaders: registering loader cardclient config
15:57:18.390: cardclients: registering cardclient Newcamd
15:57:18.390: cardclients: registering cardclient Newcamd2
15:57:18.390: cardclients: registering cardclient CCcamN
15:57:18.390: cardclients: registering cardclient Radegast
15:57:18.390: cardclients: registering cardclient Camd35
15:57:18.390: cardclients: registering cardclient EmuBox03
15:57:18.390: cardclients: registering cardclient Gbox
15:57:18.390: cardclients: registering cardclient GboxN
15:57:18.390: cardclients: registering cardclient MboxN
15:57:18.390: structloaders: registering loader smartcard data
15:57:18.390: systems: registering CA system SC-Irdeto, pri -10, ident 1001
15:57:18.390: feature: using feature SMARTCARD
15:57:18.390: registering Irdeto smartcard (id 49726474)
15:57:18.390: systems: registering CA system SC-Seca, pri -10, ident 1002
15:57:18.390: registering Seca smartcard (id 53656361)
15:57:18.390: systems: registering CA system SC-Viaccess, pri -10, ident 1003
15:57:18.390: registering Viaccess smartcard (id 56696173)
15:57:18.390: systems: registering CA system SC-Conax, pri -10, ident 1004
15:57:18.390: registering Conax smartcard (id 436f6e78)
15:57:18.390: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
15:57:18.390: registering Cryptoworks smartcard (id 4372576f)
15:57:18.390: systems: registering CA system SC-Nagra, pri -10, ident 1006
15:57:18.390: registering Nagra smartcard (id 4e616772)
15:57:18.390: systems: registering CA system SC-NDS, pri -10, ident 1007
15:57:18.390: registering NDS smartcard (id 56694732)
15:57:18.406: Monitor listen on port 1931
15:57:18.484: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
15:57:18.484: P:Preferred, CAID 0B00 with Provider 00000000
15:57:18.484: Engine [DVB Viewer Pro]
15:57:18.562: failed open C:\Program Files\DVBViewer\Plugins\smartcard.conf: No such file or directory
15:57:18.562: loading cardclient config from C:\Program Files\DVBViewer\Plugins\cardclient.conf
15:57:18.562: now using protocol version 525 (cdLen=8)
15:57:18.562: hostname=192.168.1.109 port=34001 emm=0 emmCaids 0b00/ffff
15:57:18.562: Newcamd: username=dummypassword=dummykey=xxxxxxxxxxxxxxxxxxproviders=none
15:57:18.562: client 'Newcamd' ready
15:57:18.562: ** registered systems:
15:57:18.562: ** SC-NDS (pri -10)
15:57:18.562: ** SC-Nagra (pri -10)
15:57:18.562: ** SC-Cryptoworks (pri -10)
15:57:18.562: ** SC-Conax (pri -10)
15:57:18.562: ** SC-Viaccess (pri -10)
15:57:18.562: ** SC-Seca (pri -10)
15:57:18.562: ** SC-Irdeto (pri -10)
15:57:18.562: ** Cardclient (pri -15)
15:57:18.562: no smartcard interface defined!
15:57:22.406: 
15:57:22.406: Ch: 262 - Com Hem-kanalen 
15:57:22.406: Programm crc: B72E272F
15:57:24.421: PMT not found...
15:57:26.437: CAT not found...
15:57:26.437: PMT: ACamd_PMT.txt, search, not found PMT=0106 (AND SID=041D)
15:57:26.437: 0x0106 0x041D 0x0000 0x00000000 0x0000 0x0000 11111110
15:57:26.437: Exit, no channel data, posible no [PMT Scan] or [PMT not found]... 

[joxen]

[FONT=Courier New]Newcamd: username=dummypassword=dummykey=xxxxxxxxxxxxxxxxxxproviders=[/FONT][FONT=Courier New]none[/FONT]

stämmer detta ???

eller har du ändrat ?

borde se ut så här

Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none

om du har ändrat pröva att sätta en 2 efter newcamd i cardclient.cof filen .

Newcamd: username=user password=pass key=0102030405060708091011121314
till
Newcamd2: username=user password=pass key=0102030405060708091011121314