Smargo Reader - Viasatkort

[BruketFans]

Har just inhandlat en Smargo läsare eftersom jag brände med Viasatkort 093E i den interna kortläsaren på DB.

Som ni ser nedan, skulle behöva lite Tips & Tricks...

oscam.server
label = viasat
protocol = mouse
detect = CD
device = /dev/ttyUSB0
enable = 1
group = 1
emmcache= 1,3,2
services = services1
caid = 093E
boxid = XXXXXX

oscam.log
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Mar 16 19:39:47 2011
-------------------------------------------------------------------------------
2011/03/16 19:39:47 2AAC6BF0 s version=1.00-unstable_svn, build #4287, system=mipsel-oe-linux, nice=-1
2011/03/16 19:39:47 2AAC6BF0 s client max. idle=120 sec, debug level=0
2011/03/16 19:39:47 2AAC6BF0 s max. logsize=1000 Kb
2011/03/16 19:39:47 2AAC6BF0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/03/16 19:39:47 2AAC6BF0 s auth size=4888
2011/03/16 19:39:47 2AAC6BF0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2)
2011/03/16 19:39:47 2AAC6BF0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2011/03/16 19:39:47 2AAC6BF0 s signal handling initialized (type=sysv)
2011/03/16 19:39:47 2AAC6BF0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/03/16 19:39:47 2AAC6BF0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/03/16 19:39:47 2AAC6BF0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/03/16 19:39:47 2AAC6BF0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/03/16 19:39:47 2AAC6BF0 s monitor: initialized (fd=6, port=988)
2011/03/16 19:39:47 2AAC6BF0 s camd33: disabled
2011/03/16 19:39:47 2AAC6BF0 s camd35: disabled
2011/03/16 19:39:47 2AAC6BF0 s cs378x: disabled
2011/03/16 19:39:47 2AAC6BF0 s newcamd: disabled
2011/03/16 19:39:47 2AAC6BF0 s cccam: initialized (fd=7, port=12000, crypted)
2011/03/16 19:39:47 2AAC6BF0 s radegast: disabled
2011/03/16 19:39:47 2AAC6BF0 s http thread started
2011/03/16 19:39:47 2AAC6BF0 s creating thread for device /dev/ttyUSB0
2011/03/16 19:39:47 2AAC6BF0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/03/16 19:39:47 2AAC6BF0 s waiting for local card init
2011/03/16 19:39:47 2BE674B0 r reader thread started (thread=2BE674B0, label=viasat, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/03/16 19:39:47 2BE674B0 r ERROR opening device /dev/ttyUSB0
2011/03/16 19:39:47 2BE674B0 r Cannot open device: /dev/ttyUSB0
2011/03/16 19:39:47 2B6674B0 h HTTP Server listening on port 8888
2011/03/16 19:39:51 2AAC6BF0 s init for all local cards done
2011/03/16 19:39:51 2AAC6BF0 s anti cascading disabled
2011/03/16 19:39:51 2C6674B0 c plain dvbapi-client granted (local, au=auto)
2011/03/16 19:39:51 2C6674B0 c dvbapi: can't open priority file /etc/tuxbox/config/oscam.dvbapi
2011/03/16 19:40:47 2BE674B0 r ERROR opening device /dev/ttyUSB0
2011/03/16 19:40:47 2BE674B0 r Cannot open device: /dev/ttyUSB0
2011/03/16 19:41:46 2BE674B0 r ERROR opening device /dev/ttyUSB0
2011/03/16 19:41:46 2BE674B0 r Cannot open device: /dev/ttyUSB0

[bpl]

Du måste köra smartreader protokollet mot en Smargo. Ändra detect till cts också.

[reader]
label = canal_digital
enable = 1
protocol = smartreader
device = 001:005
smargopatch = 1
caid = 0B00
detect = cts
group = 1
emmcache = 1,3,2

Device får du fram med: lsusb

[BruketFans]

Du måste köra smartreader protokollet mot en Smargo. Ändra detect till cts också.

[reader]
label = canal_digital
enable = 1
protocol = smartreader
device = 001:005
smargopatch = 1
caid = 0B00
detect = cts
group = 1
emmcache = 1,3,2

Device får du fram med: lsusb

Fått fram Device till 003:002 "Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC"

[reader]
label = viasat
enable = 1
protocol = smartreader
device = 003:002
smargopatch= 1
caid = 093E
detect = cts
group = 1
emmcache = 1,3,2
BoxID = xxxxxxxx

Dock fortfarande i loggen:
2011/03/17 19:52:27 2BE674B0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/03/17 19:52:27 2BE674B0 r recompile with SmartReader support.
2011/03/17 19:52:27 2BE674B0 r Cannot open device: 003:002

[99kalle]

Du måste köra smartreader protokollet mot en Smargo. Ändra detect till cts också.


[reader]
label = canal_digital
enable = 1
protocol = smartreader
device = 001:005
smargopatch = 1
caid = 0B00
detect = cts
group = 1
emmcache = 1,3,2

Device får du fram med: lsusb

vad står cts för är det nått för smargo

[Minime]

Detect = CD (Carrier Detect) - default -
Detect = DSR (Data Set Ready)
Detect = CTS (Clear To Send)
Detect = RING (Ring Indicator)
Detect = NONE (detect switched off, but signal "card is in"
Detect = gpio1 ... gpio7 (new for mipsel-uclibc)

Lite olika sätt som OSCam ska försöka Identifiera och initialisera kortet.

[99kalle]

Detect = CD (Carrier Detect) - default -
Detect = DSR (Data Set Ready)
Detect = CTS (Clear To Send)
Detect = RING (Ring Indicator)
Detect = NONE (detect switched off, but signal "card is in"
Detect = gpio1 ... gpio7 (new for mipsel-uclibc)

Lite olika sätt som OSCam ska försöka Identifiera och initialisera kortet.

är de bättre med cts än cd vid extern server eller passar de med smargo bättre

[Minime]

Visa läsare kan behöva lite olika inställningar för att fungera.
Man får ibland prova sig fram med olika inställningar för att se vad som fungerar best...
Trail and error metoden kallas det.
Nu råkar någon dock redan gjort denna process och kommit till slutsatsen att Detect = CTS funkar best med Smargo läsare.
Så Prova själv och se om det löser ditt problem.

[bpl]

Fått fram Device till 003:002 "Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC"

[reader]
label = viasat
enable = 1
protocol = smartreader
device = 003:002
smargopatch= 1
caid = 093E
detect = cts
group = 1
emmcache = 1,3,2
BoxID = xxxxxxxx

Dock fortfarande i loggen:
2011/03/17 19:52:27 2BE674B0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/03/17 19:52:27 2BE674B0 r recompile with SmartReader support.
2011/03/17 19:52:27 2BE674B0 r Cannot open device: 003:002

Du måste ha en OSCam binär som har SmartReader support...

[BruketFans]

Du måste ha en OSCam binär som har SmartReader support...

Uppfattat, då gäller det bara att hitta en sån fil !! Jag bugar och tackar! Återkommer säkert framöver ;-)

[Minime]

Ladda ned en mipsel binär av OSCam som har libUSB/Smartreader stödet kompilerat