Tack för info Atomized.

Tyvärr lyckades jag nog bricka min blackbox :-(
Jag använde denna guide för att installera PLi imagen:

Howto Flash via the root.cramfs method
It means that you use the network connection (or crossover cable) to FTP the image to your Dreambox and to flash it manually.
This way is only supported by the CDK boxes or what are also called Engima 1 boxes.
the DM500, the DM56xx and the DM7000
When you have an UTP (LAN) connection between your PC and Dreambox, do the following:
Rename the image into root.cramfs (in small letters)
Copy this root.cramfs with a FTP-software to your Dreambox in the subdirectory /var/tmp
Push on the Dream or Menu button on your remote control to get into the Enigma menu
Go to the System Settings menu and choose the Software update
Now choose Software update where you will see 2 possibilities:
Internet update
Manual update
Now you choose the last option (Manual Update).

Flashningen såg ut att fungera fint, men efter reboot så startar ej boxen.......
Är det kört, eller går det rädda den med en nollmdem kabel och dreamUP?