Oscam - Via 093e ... Card system not supported.... help ???

[Myrmidon]

Försöker få igång Via 093e på en DM500HD med Pli Enigma2.

Laddat ned o installerat senaste stabila version av Oscam.
Dom 3 konfig filerna ligger i tuxbox/config

Oscam.Conf

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1


[webif]
HttpPort = 3001
HttpUser = root
HttpPWD = dreambox
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 1


[dvbapi]
Enabled = 1
Boxtype = coolstream
User = DVBApi
AU = 2

Oscam.server

[reader]
Label = Viasat
Protocol = internal
Device = 0
Mhz = 337
Detect = CD
Group = 1
CAID = 093E
EMMCache = 1,3,2

Oscam.user

[account]
User = DVBApi
AU = 1
Group = 1


[account]
User = User1
Pwd = Pass1
AU = 1
Group = 1

Logg (oscam.log)

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Feb 13 20:37:53 2012
-------------------------------------------------------------------------------
2012/02/13 20:37:53 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/13 20:37:53 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/13 20:37:53 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/13 20:37:53 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/13 20:37:53 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/13 20:37:53 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/13 20:37:53 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/13 20:37:53 2AAC7480 s signal handling initialized (type=sysv)
2012/02/13 20:37:53 2AAC7480 s 164 service-id's loaded in 4ms
2012/02/13 20:37:53 2AAC7480 s oscam.tiers loading failed
2012/02/13 20:37:53 2AAC7480 s 14 provid's loaded
2012/02/13 20:37:53 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/13 20:37:53 2AAC7480 s monitor: disabled
2012/02/13 20:37:53 2AAC7480 s camd33: disabled
2012/02/13 20:37:53 2AAC7480 s camd35: disabled
2012/02/13 20:37:53 2AAC7480 s cs378x: disabled
2012/02/13 20:37:53 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/13 20:37:53 2AAC7480 s CAID: 093E
2012/02/13 20:37:53 2AAC7480 s provid #0: 000000
2012/02/13 20:37:53 2AAC7480 s radegast: disabled
2012/02/13 20:37:53 2AAC7480 s http thread started
2012/02/13 20:37:53 2AAC7480 s creating thread for device /dev/sci0
2012/02/13 20:37:53 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/13 20:37:53 2AAC7480 s waiting for local card init
2012/02/13 20:37:53 2AF794B0 h HTTP Server listening on port 3001
2012/02/13 20:37:53 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/13 20:37:54 2AFF94B0 r viasat card detected
2012/02/13 20:37:55 2AFF94B0 r ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03 
2012/02/13 20:37:56 2AFF94B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.37 Mhz
2012/02/13 20:38:01 2AFF94B0 r card system not supported
2012/02/13 20:38:01 2AFF94B0 r Normal mode failed, reverting to Deprecated Mode
2012/02/13 20:38:02 2AFF94B0 r ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03 
2012/02/13 20:38:03 2AFF94B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.37 Mhz
2012/02/13 20:38:08 2AFF94B0 r card system not supported
2012/02/13 20:38:08 2AFF94B0 r card initializing error
2012/02/13 20:38:09 2AAC7480 s init for all local cards done
2012/02/13 20:38:09 2AAC7480 s anti cascading disabled

Ser inte vart jag gör fel eller vart det ligger.
Vad jag vet var att man behövde BoxId på äldre Oscam, men detta var borta i senaste versionen så man kan köra utan BoxId eller är jag ute o cyklar ???

Mycket tacksam för lite assistans.. börjar få abstinens på detta :/

[atomized]

När det gäller Viasat 093E så måste du ha med "boxid" parametern i oscam.server, typ:
boxid = XXXXXXXX

Det finns en wiki om hur man tar fram sin boxid:
http://www.comhit.net/showwiki.php?title=Boxid+Boxkey

[Myrmidon]

Ska BoxId = HEX

stå på nån särskild rad eller kan jag lägga den på raden under CAID =

?

[Myrmidon]

Slängde in BoxID.. o lite längre gick det nu.
Ändrade samtidigt till 500Mhz i conf filen då den säger att kortet ska köras i 5mhz o inte 3,37.

Felmedelande nu:

--------------
>> OSCam <<  cardserver started at Mon Feb 13 21:52:26 2012
-------------------------------------------------------------------------------
2012/02/13 21:52:26 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/13 21:52:26 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/13 21:52:26 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/13 21:52:26 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/13 21:52:26 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/13 21:52:26 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/13 21:52:26 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/13 21:52:26 2AAC7480 s signal handling initialized (type=sysv)
2012/02/13 21:52:26 2AAC7480 s 164 service-id's loaded in 2ms
2012/02/13 21:52:26 2AAC7480 s oscam.tiers loading failed
2012/02/13 21:52:26 2AAC7480 s 14 provid's loaded
2012/02/13 21:52:26 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/13 21:52:26 2AAC7480 s monitor: disabled
2012/02/13 21:52:26 2AAC7480 s camd33: disabled
2012/02/13 21:52:26 2AAC7480 s camd35: disabled
2012/02/13 21:52:26 2AAC7480 s cs378x: disabled
2012/02/13 21:52:26 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/13 21:52:26 2AAC7480 s CAID: 093E
2012/02/13 21:52:26 2AAC7480 s provid #0: 000000
2012/02/13 21:52:26 2AAC7480 s radegast: disabled
2012/02/13 21:52:26 2AAC7480 s http thread started
2012/02/13 21:52:26 2AAC7480 s creating thread for device /dev/sci0
2012/02/13 21:52:26 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/13 21:52:26 2AAC7480 s waiting for local card init
2012/02/13 21:52:26 2AF794B0 h HTTP Server listening on port 3001
2012/02/13 21:52:26 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/13 21:52:27 2AFF94B0 r viasat card detected
2012/02/13 21:52:28 2AFF94B0 r ERROR: 0 characters found in ATR

Vet inte riktigt vad den menar med:
0 characters found in ATR

Det klagas också på:
2012/02/13 21:52:25 2AAC7480 s oscam.tiers loading failed
men räknar med att detta är skitsamma.

[Kokkivoxx]

Hej

oscam.tiers behöver du inte bry dig om i detta fallet. Har du testat med

ident =

eller

ident = 093E

Detta ska isåfall finnas med i både oscam.server och oscam.user

Testa med ident = först då den antar default, annars kan du använda det andra exemplet för att tvinga kortet att identifiera kort och krypteringsguard.

[Myrmidon]

Ska jag skippa CAID o köra ident eller ska båda va med ?

O vart i user filen bör jag lägga ident = xxx ?

[Kokkivoxx]

båda ska vara med. lägg nedanför caid i båda filerna (oscam.server och oscam.user)

Det ska alltså se ut:

caid = 093E
ident =

eller

caid = 093E
ident = 093E

[atomized]

Kolla hur konfigurationsfilerna ser ut i punkt 2.6 i denna guiden och försök att göra likadant:
http://www.comhit.net/content.php/19...Cam-CardServer

Du behöver bara ta med de delarna som handlar om Viasat och 093E.

[Volvo3]

Skärpning, sluta snacka boxid när läsaren inte snackar med kortet! Ta bort MHz. Och sedan när blev en dm500hd en coolstream?

Sent from my Galaxy Nexus using Tapatalk

[Myrmidon]

Nytt försök, samma bekymmer.

Server

[reader]Label = Viasat
enable = 1
Protocol = internal
Device = 0
# Mhz = 500
# cardmhz = 500
Detect = CD
Group = 1
CAID = 093E
ident = 093E
BoxID = xxxxxx
EMMCache = 1,3,2

Conf

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1


[webif]
HttpPort = 8080
HttpUser = user
HttpPWD = pass
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 0
[dvbapi]
Enabled = 1
User = DVBApi
AU = 2

User

[account]User = DVBApi
AU = 1
Group = 1


ident        = 093E:000000
caid         = 093E


[account]
User = User1
Pwd = Pass1
AU = 1
Group = 1


ident        = 093E:000000
caid         = 093E

Log

------------------------------------------------------------------------------->> OSCam <<  cardserver started at Tue Feb 14 18:32:36 2012
-------------------------------------------------------------------------------
2012/02/14 18:32:36 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/14 18:32:36 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/14 18:32:36 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/14 18:32:36 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/14 18:32:36 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/14 18:32:36 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/14 18:32:36 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/14 18:32:36 2AAC7480 s signal handling initialized (type=sysv)
2012/02/14 18:32:36 2AAC7480 s 164 service-id's loaded in 2ms
2012/02/14 18:32:36 2AAC7480 s oscam.tiers loading failed
2012/02/14 18:32:36 2AAC7480 s 14 provid's loaded
2012/02/14 18:32:36 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/14 18:32:36 2AAC7480 s monitor: disabled
2012/02/14 18:32:36 2AAC7480 s camd33: disabled
2012/02/14 18:32:36 2AAC7480 s camd35: disabled
2012/02/14 18:32:36 2AAC7480 s cs378x: disabled
2012/02/14 18:32:36 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/14 18:32:36 2AAC7480 s CAID: 093E
2012/02/14 18:32:36 2AAC7480 s provid #0: 000000
2012/02/14 18:32:36 2AAC7480 s radegast: disabled
2012/02/14 18:32:36 2AAC7480 s http thread started
2012/02/14 18:32:36 2AAC7480 s creating thread for device /dev/sci0
2012/02/14 18:32:36 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/14 18:32:36 2AAC7480 s waiting for local card init
2012/02/14 18:32:36 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/14 18:32:36 2AF794B0 h HTTP Server listening on port 3001
2012/02/14 18:32:37 2AFF94B0 r viasat card detected
2012/02/14 18:32:38 2AFF94B0 r ERROR: 0 characters found in ATR


-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Tue Feb 14 18:32:38 2012
-------------------------------------------------------------------------------
2012/02/14 18:32:38 2AAC7480 s >> OSCam <<  cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2012/02/14 18:32:38 2AAC7480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2012/02/14 18:32:38 2AAC7480 s client max. idle=120 sec, debug level=0
2012/02/14 18:32:38 2AAC7480 s max. logsize=256 Kb, loghistorysize=4096 bytes
2012/02/14 18:32:38 2AAC7480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/14 18:32:38 2AAC7480 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/02/14 18:32:38 2AAC7480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/14 18:32:38 2AAC7480 s signal handling initialized (type=sysv)
2012/02/14 18:32:38 2AAC7480 s 164 service-id's loaded in 3ms
2012/02/14 18:32:38 2AAC7480 s oscam.tiers loading failed
2012/02/14 18:32:38 2AAC7480 s 14 provid's loaded
2012/02/14 18:32:38 2AAC7480 s 0 lengths for caid guessing loaded
2012/02/14 18:32:38 2AAC7480 s monitor: disabled
2012/02/14 18:32:38 2AAC7480 s camd33: disabled
2012/02/14 18:32:38 2AAC7480 s camd35: disabled
2012/02/14 18:32:38 2AAC7480 s cs378x: disabled
2012/02/14 18:32:38 2AAC7480 s newcamd: initialized (fd=7, port=50001, crypted)
2012/02/14 18:32:38 2AAC7480 s CAID: 093E
2012/02/14 18:32:38 2AAC7480 s provid #0: 000000
2012/02/14 18:32:38 2AAC7480 s radegast: disabled
2012/02/14 18:32:38 2AAC7480 s http thread started
2012/02/14 18:32:38 2AAC7480 s creating thread for device /dev/sci0
2012/02/14 18:32:38 2AAC7480 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/14 18:32:38 2AAC7480 s waiting for local card init
2012/02/14 18:32:38 2AFF94B0 r reader thread started (thread=2AFF94B0, label=viasat, device=/dev/sci0, detect=cd, mhz=337, cardmhz=357)
2012/02/14 18:32:38 2AF794B0 h HTTP Server listening on port 3001
2012/02/14 18:32:38 2AFF94B0 r viasat card detected
2012/02/14 18:32:40 2AAC7480 s thread 2AAC7480 exit with signal 15
2012/02/14 18:32:40 2AAC7480 s cardserver down

Notera att i första försöket (gjordes iofs många med samma resultat, enbart klippt ut 2 sista ur loggen) så är det samma fel som tidigare.
I andra försöket dock stänger den igen cardserver.

Så, snälla ge mig lite hjärnceller för mina är totalt kassa...