Bilden fryser ofta

[Tom80]

Hej!

Ska ta och prova med en annan router tror jag men jag skickar med Newcs-filen här ifall det syns något fel.

<newCSconfig>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>local</name>
<password>local</password>
<hostname>localhost</hostname>
<port>12000</port>
<allow>lower</allow>
<allow>upper</allow>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>ssssss</name>
<password>ttttttt</password>
<hostname>192.168.1.xx</hostname>
<port>12000</port>
<au>off</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
<user>
<name>uuuuuuuuuuu</name>
<password>ttttt</password>
<hostname>vvvvvvvvvv.no-ip.info</hostname>
<au>off</au>
<spider>No</spider>
</user>
<user>
<name>wwwwwwwww</name>
<password>xxxxx</password>
<hostname>yyyyyyyyyy.no-ip.biz</hostname>
<au>off</au>
<spider>No</spider>
</user>
</newcamdserver>
</newCSconfig>

Och newcamd.list...

CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = 192.168.1.xx10000 ssssss ttttttt 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = 192.168.1.xx 10001 ssssss ttttttt 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = vvvvvvvvvv.no-ip.info 10000 uuuuuuuuuuu ttttt 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan newcs
CWS = vvvvvvvvvv.no-ip.info 10001 uuuuuuuuuuu ttttt 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan newcs
CWS = yyyyyyyyyy.no-ip.biz 10000 wwwwwwwww xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan newcs
CWS = yyyyyyyyyy.no-ip.biz 10001 wwwwwwwww xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan newcs
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
ADMIN_PASSWORD = secret 01 02 03 04 05 06 07 08 09 10 11 12 13 17

Har två konton på wan för tillfället. Det första går till stugan och det andra är kvar sedan jag provade hos brorsan. Ska också ta och byta deskkey sen när allt rullar som det ska.
Har provat att överklocka korten något till 600 mhz men det blev inte bättre.

Mvh Tom