DM800 Cardserver till Ett DM800 Hemma Net.....

[spacecake]

Hi Again,

Here are my settings Maybe you can see if look OK Please

ON DM800 - Server :

/etc/tuxbox/config/oscam-experimental/oscam.user


[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1

And on DM500 Client

/var/tuxbox/config/newcamd/newcamd.conf

CWS = 192.168.0.14 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver

Dont seem to have newcamd.list .....

What do you think ?

Thanks in Advance

\\S.

[atomized]

I don't know why you need all those groups, but anyway that should not be a problem:

group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19

In your CWS line you also need a port number:
CWS = 192.168.0.14 port user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver

The port number and the DES key should correspond to the settings you have under the [newcamd] section in oscam.conf on the server.

[spacecake]

Sorry To Be silly but What is DES Key ? Thanks

\\S.

[atomized]

The DES key is the long series of numbers, in your case "01 02 03 04 05 06 07 08 09 10 11 12 13 14". This key is used to encrypt the traffic and should (must) be the same on the server and on the client.

[spacecake]

Hi There I think I am getting close But :-| Thanks For all the help .......

2012/08/06 16:19:55 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7196 (mipsel-oe-linux)
2012/08/06 16:19:55 0 version=1.20-unstable_svn, build #7196, system=mipsel-oe-linux, nice=-1
2012/08/06 16:19:55 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/08/06 16:19:55 0 max. logsize=10 Kb, loghistorysize=4096 bytes
2012/08/06 16:19:55 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/06 16:19:58 0 s init for all local cards done
2012/08/06 16:19:58 0 s anti cascading disabled
2012/08/06 16:19:58 59B840 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2012/08/06 16:19:58 59B840 c dvbapi: 0 entries read from oscam.dvbapi
2012/08/06 16:21:55 59DA00 c client connected to 35000 port
2012/08/06 16:21:55 59DA00 c plain newcamd-client 192.168.0.18 rejected (invalid access)
2012/08/06 16:21:55 59DA00 c anonymous disconnected from 192.168.0.18
2012/08/06 16:21:55 59DA00 c thread 2AF6D4B0 ended!


Seems Like 3 main files ? Oscam.conf

SERVER

[newcamd]
key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port = 35000,34003@0500:FFF400,042800,042810
keepalive = 1
allowed = 192.168.0.14,127.0.0.1,192.168.65.206

Then oscam.user

[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1

Client

Newcamd.conf

CWS = 192.168.0.14 35000 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver

IP Server = 192.168.0.14 and Client is 192.168.0.18

Thanks m8 I buy ya a beer

\\S.

[Bogdan]

In your allowed you have 192.168.0.14 shouldn't you have the clients ip 192.168.0.18 there?
I don't know oscam so i am not sure.

[spacecake]

Yep I see that and changed.....Seems Like a connection error ?

Hmmmm Can I send My files to Ya

Please Check My Config Must be a user error I think ?

2 Beers

HUGS

\\S.

[atomized]

Try this:

SERVER

[newcamd]
key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port = 35000@0500:000000

Then oscam.user 

[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
caid = 0500
ident = 0500:000000

What provider are you using? 0500 is for Boxer, maybe you have Comhem or other?

[spacecake]

Hi Atomized

Great with all the help much appreciated

Yes I have Comhem Orig card in the DM800

Thanks again soon be 3 beers for you

\\S.

[micklarn]

Caid for Comhem is 0b00.

Change these values.

In section newcamd:
port = 35000@0B00:000000
key = 0102030405060708091011121314

In section account:
caid = 0B00
ident = 0B00:000000