DM800 Cardserver till Ett DM800 Hemma Net.....

[atomized]

micklarn is right.

And there should be no spaces in the DES key in the oscam configuration. I missed that in my example.

[spacecake]

Looking good

Have connection anyway

2012/08/07 16:08:54 58C7E8 r lower [conax] ready for requests
2012/08/07 16:08:57 0 s init for all local cards done
2012/08/07 16:08:57 0 s anti cascading disabled
2012/08/07 16:08:57 59B5C8 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2012/08/07 16:08:57 59B5C8 c dvbapi: 0 entries read from oscam.dvbapi
2012/08/07 16:09:48 59D788 c client connected to 35000 port
2012/08/07 16:09:48 59D788 c encrypted newcamd:35000-client 192.168.0.18 granted (user2, au=auto (1 reader))
2012/08/07 16:09:48 59D788 c user user2 authenticated successfully (generic)
2012/08/07 16:09:48 59D788 c AU enabled for user user2 on reader lower
2012/08/07 16:09:54 58C7E8 r lower [conax] user2 emmtype=shared, len=130, idx=0, cnt=1: written (107 ms)

BUT :-|


2012/08/07 16:11:34 59D788 c user2 (051C&44DE79/0000/051C/4C:E622): rejected caid (1 ms) (0/0/0/0) (invalid caid 51c )
2012/08/07 16:11:45 59D788 c user2 (0455&FEE66C/0000/0455/4C:F3B1): rejected caid (1 ms) (0/0/0/0) (invalid caid 455 )
2012/08/07 16:11:53 59D788 c user2 (0451&4A5DFA/0000/0451/4C:05C8): rejected caid (1 ms) (0/0/0/0) (invalid caid 451



?? Thanks you guys are Best One more hurdle I think


Maybe I need to edit /etc/tuxbox/config/oscam-experimental/oscam.dvbapi ??

You guys upto 4 beers

\\S.

[beson]

Why don't you present all your configfiles.
On serverbox as well on clientbox.
At least I, have no clue how your config looks like.

Here's a good site for you to read about oscam config.
http://streamboard.de.vu/svn/oscam/t...n/doc/example/

beson

[atomized]

In order to solve your problem I think you need to show us your complete configuration files. Please show us from server: oscam.conf, oscam.server and oscam.user. From client: newcamd.conf.

[beson]

He, he...
One minute ahead of you atomized.

beson

[atomized]

He, he...
One minute ahead of you atomized.

beson

Yeah, you were a little bit faster this time...

[spacecake]

He He Guys

OK Here We go I show the whole files

SERVER 192.168.0.14

oscam.server :

moreroot@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...cam.server.txt

[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid =
ident =
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0

# uncomment and enable this lines below only if devices are present
#[reader]
#label = upper
#enable = 0
#protocol = internal
#device = /dev/sci1
#detect = cd
#mhz = 500
#cardmhz = 500
#caid =
#ident =
#services =
#group = 2
#emmcache = 1,3,15
#lb_weight = 100
#cccreshare = 3
#audisabled = 0

#[reader]
#label = smartreader
#enable = 0
#protocol = mouse
# dreambox kernel does not support smartreader protocol so use mouse and set speed with ttyS0 tool
# for devices boxes with libusb1.0.6 or greater and kernel above 2.6.30 use smartreader
#device = /dev/ttyUSB0
# for smartreader protocol use bus:device
# bus:device bus name and device name of the Smartreader+
# (get the names with lsusb 'Bus' and 'Device')
#detect = cd
#mhz = 600
# do not use with mouse do use with smartreader protocol
#cardmhz = 600
# do not use with mouse do use with smartreader protocol
#caid =
#ident =
#services =
#group = 3
#emmcache = 1,3,15
#lb_weight = 100
#cccreshare = 3
#audisabled = 0

# uncomment and adapt to your needs the readers below this line or ad extra ones.
#[reader]
#label = pcserverlocalnetwork
#enable = 1
#protocol = cccam
#device = 192.168.123.9,12000
#account = user
#password = pasword
#reconnecttimeout = 1
#group = 5
#emmcache = 1,2,15
#lb_weight = 100
#cccversion = 2.2.1
#cccmaxhops = 5
#ccckeepalive = 1
#cccreshare = 3
#audisabled = 0

# on cccam it would be a c line like:
#C: 192.168.123.9 12000 user pasword no { 0:0:5 }

#[reader]
#label = remoteccampeer
#enable = 1
#protocol = cccam
#device = cccam.example.cx,12925
#account = user
#password = password
#services = !service1,!service2
# (the ignored providers or channel see oscam.services)
#reconnecttimeout = 2
#group = 12
#lb_weight = 100
#cccmaxhops = 5
#cccreshare = 3
#ccckeepalive = 1
#audisabled = 1
# the best is for NOT sending emm's to remote cccam peers
#cccversion = 2.2.1

# on cccam it would have been a c line like :
# C: cccam.example.cx 12925 user password no { 0:0:5 }

oscam.conf :

root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.conf.txt

[global]
disablelog = 0
disableuserfile = 1
logfile = /oscam.log
# first create the needed directory's and see if there is usb stick, cf or hdd
#usrfile = /media/usb/oscam/user.log
# first create the needed directory's and see if there is usb stick ,cf or hdd
#cwlogdir = /media/usb/oscam
# first create the needed directory's and see if there is usb stick ,cf or hdd
#emmlogdir = /media/usb/
# first create the needed directory's and see if there is usb stick ,cf or hdd
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600

[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08

[webif]
httpport = 16200
httpuser = user
httppwd = password
httprefresh = 20
httpallowed = 127.0.0.1,192.168.65.1,192.168.65.3,192.168.65.206 ,192.168.65.208,192.168.65.11
httphideidleclients = 0
httpreadonly = 0

[cccam]
port = 12000
version = 2.2.1
reshare = 3
reshare_mode = 4
ignorereshare = 0
minimizecards = 0
keepconnected = 1
nodeid = 0a0b0c0d0e0f1215

[dvbapi]
enabled = 1
au = 1
user = dvbapiau
boxtype = dreambox

[newcamd]
port = 35000@0B00:000000
key = 0102030405060708091011121314
keepalive = 1
allowed = 192.168.0.18,127.0.0.1,192.168.65.206

#[radegast]
#port = 30000
#user = radegastuser
#allowed = 127.0.0.1,192.168.0.0-192.168.255.255

#[camd33]
#port = 40000
#serverip = 192.168.123.1
#key = 01020304050607080910111213141516

#[cs378x]
#port = 50000@0300:600000

#[gbox]
#hostname = host.example.com
#port = 60000
#password = mypassword

oscam.user :

root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.user.txt

# is needed for au

[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
caid = 0B00
ident = 0B00:000000



[account]
user = dvbapiau
pwd =
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
# put all reader groups otherwise you not have ecm from the non included group.
uniq = 3
monlevel = 0
au = 1

# for using mpcsmon

[account]
user = usermonitor
pwd = pasword
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,19,20 ,21
uniq = 1
sleep = 0
monlevel = 4

#[account]
#user = user2
#pwd = pasword2
#disabled = 0
#group = 1,2,3,4,5,6,7,8,9,10,11,13,14,15,16
#uniq = 3
#sleep = 0
#monlevel = 0
#service = !service1,!service2
#services defind in oscam.services if empty all services are allowed.
#cccmaxhops = 5
#cccreshare = 2 # note the difference with { 0:0:3 } from f line cccam .
#cccignorereshare = 0
#keepalive = 1
#hostname = cccam.example.cx

# f line in cccam would be like :
# F: user pasword2 5 0 0 { 0:0:3 } { } { } cccam.example.cx
# this users c line here server line in oscam.server has group 12 to avoid loop back I did not put group 12 in his user
# account f line. Normally it's not needed... However some svn versions can have segfault errors and jumps out due to that loopback.
# By doing this you will avoid that kind of problems.That's also the reason that i asign a different group to each reader.

CLIENT 192.168.0.18

newcamd.conf :

root@dm500 ~ # more /var/tuxbox/config/newcamd/newcamd.conf
# /var/tuxbox/config/newcamd/newcamd.conf
#
# newcamd mandatory settings
#
# Use emulator?
EMU = yes
# if both control word server and emulator keys are available for the
# channel, which method should be tried first?
PREFER_EMU = yes
# Autoupdate for Emu and Control Word Servers
# AU is always yes if there are betad UDS control word server
# connected to newcamd
AU = yes
#
# OSD
#
# number of seconds to show the newcamd OSD, works on enigma only
# 0 seconds -> OSD off
# 1 second -> show "Can't decode" messages only
OSD_TIMEOUT = 0
# Recent Enigma versions come with a new option "Use http authentication"
# in the Expert Setup menu. If this option is enabled, the Enigma web server
# requires all clients to authorize themselves with username (root) and
# password (usually dbox2 or dreambox). The following option tells newcamd
# about the authentication username and password to use for the web server
# in order to be able to display its on screen information.
OSD_WEB_LOGIN = root:dreambox
#
# newcamd debug options
#
# dumps all ca systems used by a channel on the console
SHOW_ALL_CA_SYSTEMS = no
# print debug messages about ECM handling
DEBUG_ECM = yes
# print debug messages about EMM handling
DEBUG_EMM = no
# print debug messages about Control Word Server (CWS)
DEBUG_CWS = yes
# print debug messages about dbox2 CAM (cam-alpha.bin)
DEBUG_CAM = yes
# hex dump of entire PAT
SHOW_PAT = no
# hex dump of entire PMT
SHOW_PMT = no
# hex dump of entire ECM
SHOW_ECM = no
# hex dump of entire CAT
SHOW_CAT = no
# hex dump of entire EMM (AU)
SHOW_EMM = no
# show network ECM messages being sent and received from/to the cardservers
SHOW_CWS_ECM = no
# show network EMM messages being sent and received from/to the cardservers
SHOW_CWS_EMM = no
# hex dump of EMMs with wrong signature
EMM_REPORT_WRONG_SIG = no
#
# newcamd optional settings
#
# Delay between reception of new control word and writing them into
# the CSA registers
# this is a default, can be changed for each individual key in keylist
DEFAULT_CW_DELAY = 0
# reload config on every channel zap
RELOAD_CONFIG_ON_ZAP = yes
# reload keylist on every channel zap
RELOAD_KEYLIST_ON_ZAP = no
# write osd ca info to file
CA_INFO_FILE = /tmp/cainfo.txt
#
# newcamd mandatory settings for control word servers (cws)
#
# Cardserver list
#
# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name> [noecm]
#
# wan connections will be dropped and rebuild if newcamd is told so by camdcmd
# (see admin options)
#
# If the last word in the CWS line is noecm, newcamd will not attempt to send
# any ecms to that card, it will only send EMMs (AU) if userid is 1. Useful if
# you want to merge several cards of one provider into one port using
# cardspider.
#
# hostname = uds to use betad, port is the serial port in that case
#
# CWS = uds 1 dummy dummy
#
CWS = 192.168.0.14 35000 user2 pass2 0102030405060708091011121314
#
# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
CWS = uds 0 local local
CWS_MULTIPLE = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
#
# newcamd optional settings for using control word servers (cws)
#
# Timeout for cardserver login in 100ms
CWS_CONNECT_TIMEOUT = 20
# Port to listen for incoming cardserver connections (reverse login)
# and/or admin connections
CWS_INCOMING_PORT = 12000
# Port to get a list of all connected cardservers, just telnet to it
CWS_DEBUG_PORT = 12001
# send keep alive messages to servers to keep connections from dying by
# unreasonable router NAT timeouts, make sure all cardservers/spiders you
# conntect to are v5.25 or newer, otherwise you'll loose connection to them,
# if set to yes
# seems this feature is commonly misunderstood, it only keeps connections
# open even if no data packets are using it for while (NAT routers tend to
# forget about established tcp connections when they are inactive), it is
# NOT to automatically reconnect to servers, see also Q&A in readme.txt
CWS_KEEPALIVE = no
#
# newcamd admin control options
# (incoming port is the same as CWS_INCOMING_PORT)
#
# <password> <14 byte des key>
#
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00



You Guys best !! Beers for both ......

I will check the link as well .... Sorry Was a Dead Link ......

Tonight is the Night

\\S.

[spacecake]

Noticed and changed in oscam.server :

[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid = 0B00
ident = 0B00:000000
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0

Please Help Many Beers To Come

Thanks Soooooooo.....

Nix Not work with the above change to oscam.server

Please check Config files .........

\\S.

\\S.

[matkoh]

Hmmm.

Please remove all the line starting with "#", it is very hard to read the files.

[atomized]

Well, what a load of crap you have in your config files...

Please, please do not use these stupid "config file generators"... Instead look at the excellent guide made by forum member 'minime' and try to write the config files yourself. That way you will have a better understanding of the different settings.
http://www.comhit.net/content.php/19...Cam-CardServer

I know your Swedish is not the best but just look att section 2.6 in the guide for examples of reasonable settings.

Sorry, but now I just don't have the time or motivation to go through all your weird configuration.