Resultat 1 till 4 av 4

Ämne: Comhem kort hittas inte

  1. #1

    Comhem kort hittas inte

    Hej alla, skulle behöva lite hjälp med mitt dm500c som jag flshade igår med gemini 4.6 eller nåt, det gjorde jag via telnet. Så långt allt har gått bra, sedan har jag gjort kanalsökning och har fått in massa kanaler, problemet är att jag inte har tillgång till de kanalerna utom 1,2 och 4-an resten är låsta fast jag har comhems kort i och chippen ligger nedåt. Som jag kan förstå efter all läsning här på forumet och på andra ställen måste man installera client och server programvaran för att man ska kunna läsa av kortet på själva boxen. Det har jag gjort, har lagt mgcamd manuellt som det står på guiden. Newcs xml fil ligger i tuxbox/config mappen och ser ut så här :

    Kod:
    <?xml version="1.0"?><!--
    
    
    For setup-issues, look in readme.txt!
    If there are other troubles, try different forums or irc channels around :o)
    
    
    The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
    
    
    ** This is the example file for Dreambox/TD etc. that use SCI interfaces.
    
    
    -->
    
    
    <newCSconfig>
        <readers name="Card Readers">
            <device>
                <name>lower</name>
                <type>sci</type>
                <mhz>600</mhz>
                <node>/dev/sci0</node>
                <parity>odd</parity>
                <reset>normal</reset>
                <export>Yes</export>
                <enabled>Yes</enabled>
                <blocksa>No</blocksa>
                <blockua>No</blockua>
                <blockga>No</blockga>
                <!-- <boxkey>0000000000</boxkey>  -->
                <!-- <rsa>0000000000</rsa> -->
                <irdeto-camkey>0000000000000000</irdeto-camkey>
                <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
                <crypto-special>No</crypto-special>
                <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
                <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
                <PTShandshake>No</PTShandshake>
                <carddetect>yes</carddetect>
                <newcamd_port>34000</newcamd_port>
                <autosid>Yes</autosid>
                <Seca-PPV>no</Seca-PPV>
                <pincode>0000</pincode> 
                <priority>round</priority>
            </device>
            <device>
                <name>upper</name>
                <type>sci</type>
                <mhz>600</mhz>
                <node>/dev/sci1</node>
                <parity>odd</parity>
                <reset>normal</reset>
                <export>Yes</export>
                <enabled>Yes</enabled>
                <blocksa>No</blocksa>
                <blockua>No</blockua>
                <blockga>No</blockga>
                <!-- <boxkey>0000000000</boxkey>  -->
                <!-- <rsa>0000000000</rsa> -->
                <irdeto-camkey>0000000000000000</irdeto-camkey>
                <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
                <crypto-special>No</crypto-special>
                <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
                <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
                <PTShandshake>No</PTShandshake>
                <carddetect>yes</carddetect>
                <newcamd_port>34001</newcamd_port>
                <autosid>Yes</autosid>
                <Seca-PPV>no</Seca-PPV>
                <pincode>0000</pincode> 
                <priority>round</priority>
            </device>
        </readers>
        <radegastserver>
                <enabled>No</enabled>
                <port>16000</port>
                <allow>
                    <hostname>localhost</hostname>
                </allow>
        </radegastserver>
        <cache>
                <emm>20</emm>
                <ecm>-1</ecm>
        </cache>
        <httpd>
            <server> <!-- Port to accept connections on -->
                <port>8080</port>
                <enabled>yes</enabled>
            </server>
            <user>
                <!-- valid value for userfile are:
                     Any username you'd like - Used for browser to logon (its case sensitive).    -->
                <name>newcs</name>
                
                <!-- valid value for password are:
                     Any password you'd like - Used for browser to logon (its case sensitive).    -->
                <password>newcs</password>
                
                <!-- valid value for accesslevel are:
                     admin, stats - Define what rights the user has in the web-console    -->
                <accesslevel>admin</accesslevel>
            </user>
        </httpd>    
        <debug>
                <password>NewCSpwd</password>    
                <level>normal</level>
                <type>init</type>
                <output>console,tcp</output>
                <console_options>normal,init</console_options>
                <tcp_port>1001</tcp_port>
                <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                <enabled>Yes</enabled>
                <name>newcs</name>
                <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                <user>
                    <name>dummy</name>
                    <password>dummy</password>
                    <hostname>localhost</hostname>
                    <port>12000</port>
                    <au>on</au>
                    <sidoverride>off</sidoverride>
                    <spider>No</spider>
            <rate>2</rate>
                </user>
        </newcamdserver>
    </newCSconfig>
    Min fråga är, eftersom jag har hållit på med liknande programvaror på olika OS så jag är inte helt jävla borta, vart problemet ligger? Om jag kollar processer så finns ingen process som heter newcamd aktiv:

    Kod:
      219 root     R        728   217  1.5  2.4 top    3 root     SW<        0     1  0.3  0.0 events/0
      151 root     S       8568    15  0.0 28.4 enigma
      156 root     S       8568   151  0.0 28.4 enigma
      190 root     S N     8568   151  0.0 28.4 enigma
      154 root     S       8568   151  0.0 28.4 enigma
      153 root     S N     8568   151  0.0 28.4 enigma
      155 root     S N     8568   151  0.0 28.4 enigma
      215 root     S        856   213  0.0  2.8 in.ftpd
      213 nobody   S        764    55  0.0  2.5 in.ftpd
      217 root     S        692   216  0.0  2.2 sh
       55 root     S        592     1  0.0  1.9 inetd
       15 root     S        552    14  0.0  1.8 rcS
        1 root     S        540     0  0.0  1.7 init
       14 root     S        540     1  0.0  1.7 init
      161 root     S        516   151  0.0  1.7 udhcpc
      150 root     S        444    15  0.0  1.4 gdaemon
      216 root     S        416    55  0.0  1.3 telnetd
       12 root     SW         0     1  0.0  0.0 mtdblockd

  2. #2
    ComHit Crew Minimes avatar
    Reg.datum
    Jul 2007
    Inlägg
    2 267
    Tackad
    247 gånger
    Har du provat att starta newcs via telnet?
    Vad säger den då?

    Rekomenderar dig även att rensa upp lite i newcs.xml
    ex:
    Kod:
    <?xml version="1.0"?><!--
    For setup-issues, look in readme.txt!
    If there are other troubles, try different forums or irc channels around :o)
    The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
    ** This is the example file for Dreambox/TD etc. that use SCI interfaces.
    -->
    
    <newCSconfig>
      <readers name="Card Readers">
        <device>
          <name>lower</name>
          <type>sci</type>
          <mhz>600</mhz>
          <node>/dev/sci0</node>
          <parity>even</parity>
          <reset>normal</reset>
          <export>Yes</export>
          <enabled>Yes</enabled>
          <blocksa>No</blocksa>
          <blockua>No</blockua>
          <blockga>No</blockga>
          <!-- <boxkey>0000000000</boxkey> -->
          <crypto-special>No</crypto-special>
          <PTShandshake>No</PTShandshake>
          <carddetect>yes</carddetect>
          <newcamd_port>34000</newcamd_port>
          <autosid>Yes</autosid>
          <Seca-PPV>no</Seca-PPV>
          <pincode>0000</pincode>
          <priority>round</priority>
        </device>
      </readers>
      <radegastserver>
          <enabled>No</enabled>
          <port>16000</port>
          <allow>
            <hostname>localhost</hostname>
          </allow>
      </radegastserver>
      <cache>
          <emm>20</emm>
          <ecm>-1</ecm>
      </cache>
      <httpd>
        <server> <!-- Port to accept connections on -->
          <port>8080</port>
          <enabled>yes</enabled>
        </server>
        <user>
          <name>newcs</name>
          <password>newcs</password>      
          <!-- valid value for accesslevel are: admin, stats - Define what rights the user has in the web-console  -->
          <accesslevel>admin</accesslevel>
        </user>
      </httpd>  
      <debug>
          <password>NewCSpwd</password>  
          <level>normal</level>
          <type>init</type>
          <output>console,tcp</output>
          <console_options>normal,init</console_options>
          <tcp_port>1001</tcp_port>
          <tcp_options>normal,init</tcp_options>
      </debug>
      <newcamdserver>
          <enabled>Yes</enabled>
          <name>newcs</name>
          <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
          <user>
            <name>dummy</name>
            <password>dummy</password>
            <hostname>localhost</hostname>
            <port>12000</port>
            <au>on</au>
            <sidoverride>off</sidoverride>
            <spider>No</spider>
        <rate>2</rate>
          </user>
      </newcamdserver>
    </newCSconfig>
    newcamd.list
    Kod:
    CWS_KEEPALIVE = 300
    CWS_INCOMING_PORT = 21000
    CWS = localhost 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    Senast redigerad av Minime den 2012-08-04 klockan 15:29.
    Asus EeeBox Slackware 64 15.0 - OSCam Build 10611 - Omnikey 3121
    Asus EeeBox Slackware 64 15.0 - Kodi 20.2
    Raspberry Pi 4 Slackware Arm 15.0 - Kodi 20.2
    Miraclebox Premium Twin HD - Openvix 5.2.040 - OSCam r11532 - (Neotion CI+ CA-modul)
    Sharp Aquos 40" LED-TV LC-40LE600S

  3. #3
    Tack för svaret, har gjort stor tabbe att jag helt enkelt glömt lägga in binär fil till newcs helt enkelt, jag la in bara config filer i boxen, nu ligger den på DM men när jag startar den via telnet får jag detta upp:

    Kod:
    [ 16:04:40 ] [ CardMan ] Atr header is 3B 34 [NORMAL][ 16:04:40 ] [ ATR ] Data:
    0000: 3b 34 94 00 30 42 30                             ;4..0B0
    
    
    [ 16:04:40 ] [ ATR ] T=0  1etu=64.00us  Guardtime:12etu  WWT:76800etu
    [ 16:04:40 ] [ ATR ] Historical bytes: 0 B 0 0
    [ 16:04:40 ] [ Loader ] Init Conax card
    [ 16:04:40 ] Card reader locked for reader SCI Lower Slot [/dev/sci0]
    [ 16:04:40 ] [ Sci ] Changing to: T=0  ETU=372  EGT=0 Freq=3680000.000MHz
    [ 16:04:40 ] [ Sci ] Changing to: WWT=0  BWT=0  CWT=0
    [ 16:04:40 ] [ Conax ] Sending to Card: DD26000003
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: dd 26 00 00 03                                   .&...
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 26                                               &
    
    
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: 10 01 40                                         ..@
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 98                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 11                                               .
    
    
    [ 16:04:40 ] [ Conax ] Status Word from Card: 9811
    [ 16:04:40 ] [ Conax ] Sending to Card: DDCA000011
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: dd ca 00 00 11                                   .....
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: ca                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 20 01 40 28 02 0b 00 2f 02 00 2e 30 01 08 23 01   .@(.../...0..#.
    0010: 05                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 90                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 00                                               .
    
    
    [ 16:04:40 ] [ Conax ] Status Word from Card: 9000
    [ 16:04:40 ] [ Conax ] Cas Version in use: 40 - CAS5
    [ 16:04:40 ] [ Conax ] Cas System Id: 0B00
    [ 16:04:40 ] [ Conax ] Country Indicator: 002E - Sweden
    [ 16:04:40 ] [ Conax ] Maturity Rating Level: 08 - Erotic rating
    [ 16:04:40 ] [ Conax ] Session Info (Number of sessions): 05
    [ 16:04:40 ] [ Conax ] Sending to Card: DD82000011
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: dd 82 00 00 11                                   .....
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 82                                               .
    
    
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: 11 0f 01 b0 0f ff ff fb 00 00 09 04 0b 00 e0 30  ...............0
    0010: 2b                                               +
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 98                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 1a                                               .
    
    
    [ 16:04:40 ] [ Conax ] Status Word from Card: 981A
    [ 16:04:40 ] [ Conax ] Sending to Card: DDCA00001A
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: dd ca 00 00 1a                                   .....
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: ca                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 22 18 09 04 0b 00 e0 30 23 07 00 00 00 53 86 a9  "......0#....S..
    0010: 13 23 07 00 00 00 00 29 c3 54                    .#.....).T
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 90                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 00                                               .
    
    
    [ 16:04:40 ] [ Conax ] Status Word from Card: 9000
    [ 16:04:40 ] [ Conax ] CAID + pid: 0B00E030
    [ 16:04:40 ] [ KeymaN ] Adding key 0000005386a913 type 0 on Provider 000000 for                                                                                        caid 0B00 ID=0
    [ 16:04:40 ] [ KeymaN ] Adding key 0000000029c354 type 1 on Provider 000000 for                                                                                        caid 0B00 ID=0
    [ 16:04:40 ] [ Conax ] Sending PIN-code: 0000
    [ 16:04:40 ] [ Conax ] Sending to Card: DDC8000007
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: dd c8 00 00 07                                   .....
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: c8                                               .
    
    
    [ 16:04:40 ] [ Sci ] Delay is 17us
    [ 16:04:40 ] Sci_write:
    0000: 1d 05 01 30 30 30 30                             ...0000
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 90                                               .
    
    
    [ 16:04:40 ] [ Sci ] Timeout is 1463616us
    [ 16:04:40 ] Sci_read:
    0000: 00                                               .
    
    
    [ 16:04:40 ] [ Conax ] Status Word from Card: 9000
    [ 16:04:40 ] Card reader unlocked for reader SCI Lower Slot [/dev/sci0]
    [ 16:04:40 ] [ 0B00 ] Init took: 0.201772
    [ 16:04:40 ] [ Loader ] Card 0B00 on port /dev/sci0 ready
    [ 16:04:40 ] [ Card queue /dev/sci0 ] Starting...
    [ 16:04:40 ] [ Loader ] Starting Newcamd Server on port 15050
    [ 16:04:40 ] [ Loader ] Reader type 5 on node /dev/sci1
    [ 16:04:40 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
    [ 16:04:40 ] [ CardMan ] Reseting reader parameters
    [ 16:04:40 ] [ Sci ] Opening device /dev/sci1
    [ 16:04:40 ] [ Sci ] Could not open device /dev/sci1  [Might be in use by anothe                                                                                       r process?]
    [ 16:04:40 ] [ Loader ] Reset failed ...
    [ 16:04:40 ] [ Loader ] Starting Newcamd Server on port 15050
    [ 16:04:40 ] [ Loader ] Starting Radegast Server on port 10001
    [ 16:04:40 ] [ SockSrv ] Server thread started
    [ 16:04:40 ] [ NewCS ] Ready to GO! :)
    root@dreambox:/var/bin> [ 16:04:40 ] [ Newcamd ] Newcamd thread Server started o                                                                                       n port 15050
    newcamd: main loop
    [ 16:04:40 ] [ Card queue /dev/sci1 ] Starting...
    [ 16:04:40 ] [ Newcamd ] Newcamd thread Server started on port 15050
    [ 16:04:40 ] bind: error! 98: Address already in use
    [ 16:04:40 ] [ Newcamd ] Stopping port 15050
    [ 16:04:40 ] [ Chameleon2 ] Server started on port 1234 for realm myShares
    [ 16:04:40 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:04:40 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 1 seconds]
    [ 16:04:42 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:04:42 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 2 seconds]
    [ 16:04:45 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:04:45 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 3 seconds]
    [ 16:04:49 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:04:49 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 4 seconds]
    root@dreambox:/var/bin> [ 16:04:54 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:04:54 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 5 seconds]
    [ 16:05:00 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:05:00 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 6 seconds]
    [ 16:04:40 ] bind: error! 98: Address already in use
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:40 ] [ Newcamd ] Stopping port 15050
    [ 16:04:40 ] [ Chameleon2 ] Server started on port 1234 for realm myShares
    [ 16:04:40 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:04:40 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 1 seconds]
    [ 16:04:42 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:04:42 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 2 seconds]
    [ 16:04:45 ] [ Chameleon2 ] Failed to lookup remote
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:40 ] [ Chameleon2 ] Server started on port 1234 for realm myShares
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:40 ] [ Chameleon2 ] Failed to lookup remote
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:40 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 1 seconds]
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:42 ] [ Chameleon2 ] Failed to lookup remote
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:42 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 2 seconds]
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:45 ] [ Chameleon2 ] Failed to lookup remote
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:45 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 3 seconds]
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:49 ] [ Chameleon2 ] Failed to lookup remote
    [: missing ]
    root@dreambox:/var/bin> [ 16:04:49 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try i                                                                                       n 4 seconds]
    [: missing ]
    root@dreambox:/var/bin> root@dreambox:/var/bin> [ 16:04:54 ] [ Chameleon2 ] Failed to lookup remote
    -sh: root@dreambox:/var/bin: not found
    root@dreambox:/var/bin> [ 16:04:54 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 5 seconds]
    [: missing ]
    root@dreambox:/var/bin> [ 16:05:00 ] [ Chameleon2 ] Failed to lookup remote
    [: missing ]
    root@dreambox:/var/bin> [ 16:05:00 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 6 seconds][ 16:05:07 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:05:07 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 7 seconds]
    [ 16:05:15 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:05:15 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 8 seconds]
    
    
    root@dreambox:/var/bin> [ 16:04:54 ] [ 16:05:24 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:05:24 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 9 seconds]                                                              [ 16:05:34 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:05:34 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 10 seconds]
    [ 16:05:45 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:05:45 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 11 seconds]
    [ 16:05:57 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:05:57 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 12 seconds]
    [ 16:06:11 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:06:11 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 13 seconds]
    [ 16:06:25 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:06:25 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 14 seconds]
    [ 16:06:40 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:06:40 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 15 seconds]
    [ 16:06:56 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:06:56 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 16 seconds]
    [ 16:07:13 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:07:13 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 17 seconds]
    [ 16:07:31 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:07:31 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 18 seconds]
    [ 16:07:50 ] [ Chameleon2 ] Failed to lookup remote
    [ 16:07:50 ] [ Chameleon2 ] Failed to connect to remote on port 1234 [Next try in 19 seconds]

  4. #4
    Så här var det:
    Ingen startad newcs och ingen startad client heller, då var det inte så knstigt att jag hade inte nån signal övehuvudtaget. Det hjälpte med att rensa newsc.xml filen också. Nu har jag bild på kanaler som kommer från kortet i alla fall. Nu måste jag bara klura ut hur fan jag får newsc att starta automatiskt. Kul grej att hålla på, lite frustrerande när man gör det första gången men va fan man lär sig inget om man inte gräver lite djupare . Tack

Liknande ämnen

  1. Svar: 30
    Senaste inlägg: 2011-12-01, 18:50
  2. USB sticka som inte hittas i DM800
    Av Appen i forum Dreambox
    Svar: 0
    Senaste inlägg: 2010-03-15, 14:27
  3. Omkopplaren -Kanalen kan inte hittas-
    Av Marty72 i forum Dreambox
    Svar: 2
    Senaste inlägg: 2009-12-10, 23:38
  4. Viasat's kanaler hittas inte
    Av Snouser i forum Dreambox
    Svar: 7
    Senaste inlägg: 2006-08-17, 17:10
  5. varför hittas inte programmeraren?
    Av hedman75 i forum Canal Digital
    Svar: 18
    Senaste inlägg: 2004-02-06, 16:43

Taggar för det här ämnet

Behörigheter för att posta

  • Du får inte posta nya ämnen
  • Du får inte posta svar
  • Du får inte posta bifogade filer
  • Du får inte redigera dina inlägg
  •  
stöd oss
ComHit.net är en ideell sidan som drivs helt utan reklamintäkter, detta för att du som användare ska slippa all störande reklam och diskutera de saker du är intresserad av.
Skulle man däremot känna att man vill donera en slant för att hjälpa ComHit.net att bli bättre är ni välkomna att donera via länken nedan.

https://www.paypal.me/comhit/
Följ oss