Installera MythTv med DVB-S2 Quad Tuner TV Card för Canal Digital?

[Erik-NA]

Nu fungerar oscam och sasc-ng. I alla fall enligt loggarna, vad jag kan se.

Däremot, när jag startar MythTv-backensetup och går till Capture Card Setup så blir det något fel. Se skärmdump nedan
backend-error.jpg

När jag stegar ned och väljer första raden för adapter4 hänger sig setup-programmet. Jag frågar mig också varför det är dubbla frontends för de virtuella adaptrarna 4 till 7?

~# ls /dev/dvb/adapter0
demux0  dvr0  frontend0  net0

~# ls /dev/dvb/adapter4
audio0  audio1  demux0  demux1  dvr0  dvr1  frontend0  frontend1  osd0  osd1  video0  video1

Startar dvbloopback med

modprobe dvbloopback num_adapters=4

startsträngen till sasc-ng ser ut så här:

sasc-ng -j 0:4 -j 1:5 -j 2:6 -j 3:7 --cam-budget --sid-allpid --sid-nocache -d 0xf0a --log /var/log/sasc-ng.log --cam-dir /etc/camfiles/

Loggen från sasc-ng ser ut så här:

Aug 20 21:51:44.807 : Version: 0.0.2-29b7b5f231c8+
Aug 20 21:51:44.808 CAM: initializing plugin: SoftCam (1.0.0pre-HG-29b7b5f231c8+): A software emulated CAM
Aug 20 21:51:44.809 [general.info] SC version 1.0.0pre-HG-29b7b5f231c8+ initializing (VDR 1.6.0)
Aug 20 21:51:44.809 CAM: starting plugin:
Aug 20 21:51:44.810 [general.info] SC version 1.0.0pre-HG-29b7b5f231c8+ starting (VDR 1.6.0)
Aug 20 21:51:44.810 [core.load] ** Plugin config:
Aug 20 21:51:44.811 [core.load] ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Aug 20 21:51:44.811 [core.load] ** Local systems DON'T take priority over cached remote
Aug 20 21:51:44.812 [core.load] ** Concurrent FF recordings are NOT allowed
Aug 20 21:51:44.812 [core.load] ** Force transfermode with digital audio
Aug 20 21:51:44.813 [core.load] ** ECM cache is set to enabled
Aug 20 21:51:44.813 [core.load] ** TsBufferSize is 4 MB
Aug 20 21:51:44.814 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Aug 20 21:51:44.814 [general.error] failed open /etc/camfiles//override.conf: No such file or directory
Aug 20 21:51:44.814 [general.error] failed open /etc/camfiles//smartcard.conf: No such file or directory
Aug 20 21:51:44.815 [general.error] failed open /etc/camfiles//cardslot.conf: No such file or directory
Aug 20 21:51:44.815 [general.error] failed open /etc/camfiles//SoftCam.Key: No such file or directory
Aug 20 21:51:44.816 [general.info] loading cardclient config from /etc/camfiles//cardclient.conf
Aug 20 21:51:44.816 [cardclient.newcamd] now using protocol version 525 (cdLen=8)
Aug 20 21:51:44.816 [cardclient.core] hostname=localhost port=15000 emm=1 emmCaids 0b00/ffff
Aug 20 21:51:44.817 [cardclient.core] Newcamd: username=TheUser password=ThePass key=000102030405060708090A0B0C0D
Aug 20 21:51:44.817 [cardclient.core] client 'Newcamd' ready
Aug 20 21:51:44.818 [core.net] connecting to localhost:15000/tcp (127.0.0.1)
Aug 20 21:51:44.821 [cardclient.login] Newcamd: CaID=0b00 admin=1 srvUA=00000000XXXXXXXX provider 000000/0000000000XXXXXX
Aug 20 21:51:44.822 [general.error] no keys loaded for softcam!
Aug 20 21:51:44.822 [core.load] ** registered systems:
Aug 20 21:51:44.822 [core.load] ** Viaccess          (pri -10)
Aug 20 21:51:44.823 [core.load] ** Seca              (pri -10)
Aug 20 21:51:44.823 [core.load] ** SC-VideoGuard2    (pri  -5)
Aug 20 21:51:44.824 [core.load] ** SC-Viaccess       (pri  -5)
Aug 20 21:51:44.824 [core.load] ** SC-Seca           (pri  -5)
Aug 20 21:51:44.824 [core.load] ** SC-Nagra          (pri  -5)
Aug 20 21:51:44.825 [core.load] ** SC-Irdeto         (pri  -5)
Aug 20 21:51:44.825 [core.load] ** SC-Cryptoworks    (pri  -5)
Aug 20 21:51:44.826 [core.load] ** SC-Conax          (pri  -5)
Aug 20 21:51:44.826 [core.load] ** Fake-NDS          (pri -12)
Aug 20 21:51:44.827 [core.load] ** Nagra2            (pri -10)
Aug 20 21:51:44.827 [core.load] ** Nagra             (pri -10)
Aug 20 21:51:44.828 [core.load] ** Irdeto2           (pri  -8)
Aug 20 21:51:44.828 [core.load] ** Irdeto            (pri -10)
Aug 20 21:51:44.828 [core.load] ** Cryptoworks       (pri -10)
Aug 20 21:51:44.829 [core.load] ** ConstCW           (pri -20)
Aug 20 21:51:44.829 [core.load] ** Conax             (pri -10)
Aug 20 21:51:44.830 [core.load] ** Cardclient        (pri -15)
Aug 20 21:51:45.833 frontend: Starting thread on /dev/dvb/adapter4/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:45.833 dvr: Starting thread on /dev/dvb/adapter4/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Aug 20 21:51:45.833 demux: Starting thread on /dev/dvb/adapter4/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:46.835 dvr: Starting thread on /dev/dvb/adapter5/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Aug 20 21:51:46.836 demux: Starting thread on /dev/dvb/adapter5/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:46.836 frontend: Starting thread on /dev/dvb/adapter5/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:47.839 dvr: Starting thread on /dev/dvb/adapter6/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Aug 20 21:51:47.839 demux: Starting thread on /dev/dvb/adapter6/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:47.839 frontend: Starting thread on /dev/dvb/adapter6/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:48.842 dvr: Starting thread on /dev/dvb/adapter7/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Aug 20 21:51:48.842 demux: Starting thread on /dev/dvb/adapter7/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:48.842 frontend: Starting thread on /dev/dvb/adapter7/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 20 21:51:48.844 : Listening on port 5456
Aug 20 21:53:44.828 [core.net] idle timeout, disconnected localhost:15000

Vad kan vara fel?