Installera MythTv med DVB-S2 Quad Tuner TV Card för Canal Digital?

[Erik-NA]

Provade rev 570 av sasc-ng enligt följande:

hg clone -r 570 http://85.17.209.13:6100/sc
wget http://85.17.209.13:6100/raw-rev/cf44e48e7700
wget http://85.17.209.13:6100/raw-rev/c1d21c70a678
wget http://85.17.209.13:6100/raw-rev/362e03faeed6
patch -d sc -p1 < cf44e48e7700
patch -d sc -p1 < c1d21c70a678
patch -d sc -p1 < 362e03faeed6

Den sista delen av sista patchen (362e03faeed6) fick jag patcha manuellt.

Får dock exakt samma fel som förut.

Här är loggen från sasc-ng.log

[core.pids] 3: found handler for SID 4402 (3.1 idle=1 idx=1)
[core.ecm] 3.1: setting new SID 4402
[core.pids] 3.1: pids on entry
[core.pids] 3.1: pids after delete
[core.pids] 3: descrambling pid 020c on index 1
Got command(7): P idx: 1 pid: 524
[core.pids] 3: descrambling pid 02b0 on index 1
Got command(7): P idx: 1 pid: 688
[core.pids] 3: descrambling pid 02b1 on index 1
Got command(7): P idx: 1 pid: 689
[core.pids] 3: descrambling pid 0240 on index 1
Got command(7): P idx: 1 pid: 576
[core.pids] 3: descrambling pid 0350 on index 1
Got command(7): P idx: 1 pid: 848
[core.pids] 3: descrambling pid 08fb on index 1
Got command(7): P idx: 1 pid: 2299
[core.pids] 3.1: pids after add typ5=020c typ5=02b0 typ5=02b1 typ5=0240 typ5=0350 typ5=08fb
[core.ecm] 3.1: is no longer idle
[core.ecm] 3.1: triggered SID -1/4402 idx -1/1 mode -1/0 -
[core.ecm] 3.1: new caDescr: 09 04 0B 00 E0 64 09 04 0B 00 E0 64 09 04 0B 00 E0 64 09 04 0B 00 E0 64
[core.ecm] 3.1: CA descriptors for SID 4402 (len=24)
[core.ecm] 3.1: descriptor 0b 00 e0 64
[core.ecm] 3.1: found 0b00(0000) (Conax) id 0000 with ecm 64/80 (new)
[core.ecm] 3.1: descriptor 0b 00 e0 64
[core.ecm] 3.1: found 0b00(0000) (Conax) id 0000 with ecm 64/80 (already present)
[core.ecm] 3.1: descriptor 0b 00 e0 64
[core.ecm] 3.1: found 0b00(0000) (Conax) id 0000 with ecm 64/80 (already present)
[core.ecm] 3.1: descriptor 0b 00 e0 64
[core.ecm] 3.1: found 0b00(0000) (Conax) id 0000 with ecm 64/80 (already present)
[core.ecm] 3.1: try system Conax (0b00) id 0000 with ecm 64 (pri=-10)
[conax.key] missing 30 E key
[core.ecm] system: no key found for C 30 M
[core.au] 3: chain caid 0b00 -> Cardclient(-15) [0030-82/ff/00]
[core.au] 3: starting chain 0b00
[conax.key] missing 30 E key
[core.ecm] 3.1: try system Cardclient (0b00) id 0000 with ecm 64 (pri=-15)
[cardclient.core] cc-loop
[cardclient.core] now trying client Newcamd (localhost:15000)
[cardclient.ecm] Newcamd: card was not able to decode the channel
[cardclient.core] client Newcamd (localhost:15000) ECM failed (4045 ms)
[general.error] action logger 3/1 read: Buffer overflow
[cardclient.core] cc-loop
[cardclient.core] now trying client Newcamd (localhost:15000)
[cardclient.ecm] Newcamd: card was not able to decode the channel
[cardclient.core] client Newcamd (localhost:15000) ECM failed (122 ms)

Blir nyfiken på raden

[core.au] 3: chain caid 0b00 -> Cardclient(-15) [0030-82/ff/00]

Vad den nu kan betyda?

Får följande fel i oscam.log

TheUser (0B00&000000/0000/1132/8D:DE34): not found (2214 ms) by phoenix - 0B00:1132 unknown