Vilken kortläsare behöver jag ?

[nissek]

Vad blir det för com port till omnikey cardman 3121 pc windows
Windows ger inte läsaren något com ports nr
Utan det kommer till smartkortläsare i enhetshanteraren
[reader]
label = Canaldigital
enable = 1
protocol = pcsc
detect = CD
device = /dev/tty0
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
caid = 0B00

[atomized]

Nu har jag inte provat i Windows. Men prova att göra som i Linux:
device = 0

Edit:
Japp, nu hittade jag en gammal provinstallation av oscam på Windows som jag kunde testa med. Och det funkade bra med device = 0.

[reader]
label = Reader1
enable = 1
protocol = pcsc
device = 0
group = 1
emmcache = 1,3,2
caid = 0B00

[nissek]

Tackar För Hjälpen.
Har Inte Provat Inställningen Än
MVH

[nissek]

Provade Med Dina Inställningar atomized
Fungerar Inte Ändå

[reader]label = reader1
enable = 1
Protocol = pcsc
device = 0
group = 1
au = 1
emmcache = 1,3,2
CAID = 0B00

Log

2014/10/25 10:18:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9665 (i686-pc-cygwin)
2014/10/25 10:18:04 0 s creating pidfile /DOCUME~1/ADMINI~1/LOKALA~1/Temp/_oscam/oscam.pid with pid 2552
2014/10/25 10:18:04 0 s couldn't open statistics file: log/oscamuser.log
2014/10/25 10:18:04 0 s userdb reloaded: 20 accounts loaded, 0 expired, 0 disabled
2014/10/25 10:18:04 0 s signal handling initialized
2014/10/25 10:18:04 0 s newcamd: initialized (fd=3, port=10100)
2014/10/25 10:18:04 0 s -> CAID: 0B00 PROVID: 000000
2014/10/25 10:18:04 0 s newcamd: initialized (fd=4, port=10101)
2014/10/25 10:18:04 0 s -> CAID: 093E PROVID: 000000
2014/10/25 10:18:04 2005D330 h webif: decompressed 149835 bytes back into 363004 bytes
2014/10/25 10:18:04 2005D330 h HTTP Server running. ip=0.0.0.0 port=11000
2014/10/25 10:18:04 0 s reader1 [pcsc] creating thread for device 0
2014/10/25 10:18:04 0 s loadbalancer: can't read from file /DOCUME~1/ADMINI~1/LOKALA~1/Temp/_oscam/stat
2014/10/25 10:18:04 0 s waiting for local card init
2014/10/25 10:18:04 20061A70 r reader1 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2014/10/25 10:18:05 20061A70 r reader1 [pcsc] PCSC was opened with handle: -369033216
2014/10/25 10:18:05 20061A70 r reader1 [pcsc] card detected
2014/10/25 10:18:05 20061A70 r reader1 [pcsc] ATR: 3B 24 00 30 42 30 30
2014/10/25 10:18:06 20061A70 r reader1 [pcsc] card system not supported
2014/10/25 10:18:06 20061A70 r reader1 [pcsc] Normal mode failed, reverting to Deprecated Mode
2014/10/25 10:18:06 20061A70 r reader1 [pcsc] ATR: 3B 24 00 30 42 30 30
2014/10/25 10:18:07 20061A70 r reader1 [pcsc] card system not supported
2014/10/25 10:18:07 20061A70 r reader1 [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/10/25 10:18:07 20061A70 r reader1 [pcsc] card initializing error
2014/10/25 10:18:08 0 s init for all local cards done
2014/10/25 10:18:08 0 s anti cascading disabled

[atomized]

Det ser ju ut att vara en framgång på det viset att oscam hittar kortläsaren i alla fall.
Sedan verkar den ha problem att läsa själva kortet, jag vet inte riktigt varför. Funkar kortet i originalboxen?

P.S. 20 konton är lite mycket...
"2014/10/25 10:18:04 0 s userdb reloaded: 20 accounts loaded, 0 expired, 0 disabled"

[nissek]

P.S. 20 konton är lite mycket...
"2014/10/25 10:18:04 0 s userdb reloaded: 20 accounts loaded, 0 expired, 0 disabled"

Det skall vara 4 konton, har kopierats på något vis har rättat till det
funkar inte i alla fall
kortet Funkar i originalboxen

PS, Uppdaterade drivrutinerna fick då den här logen
vad betyder ready for requests

[2014-10-25 12:48:45] - 12:48:45 20061020 r reader1 [pcsc] PCSC was opened with handle: -368836608
[2014-10-25 12:48:45] - 12:48:45 20061020 r reader1 [pcsc] card detected
[2014-10-25 12:48:45] - 12:48:45 20061020 r reader1 [pcsc] ATR: 3B 24 00 30 42 30 30
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [pcsc] type: Conax, caid: 0B00, serial: ##########, hex serial: ########, card: v64
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [pcsc] Providers: 1
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [pcsc] Provider: 1 Provider-Id: 000000
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [pcsc] Provider: 1 SharedAddress: ########
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [pcsc] found card system conax
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 1, id: 6010, classes: 01BDFFC5, date: 2012/04/01 - 2012/04/30, name: Canal +
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 2, id: 6010, classes: 01BDFFC5, date: 2012/03/01 - 2012/03/31, name: Canal +
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 3, id: 6020, classes: 01FFFDFF, date: 2012/04/01 - 2012/04/30, name: Nordic 1
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 4, id: 6020, classes: 01FFFDFF, date: 2012/03/01 - 2012/03/31, name: Nordic 1
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 5, id: 6030, classes: 01000007, date: 2011/08/12 - 2011/08/30, name: Nordic 2
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 6, id: 6030, classes: 01000007, date: 1990/01/01 - 1990/01/01, name: Nordic 2
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 7, id: 6040, classes: 0107C388, date: 2012/04/01 - 2012/04/30, name: Nordic 3
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 8, id: 6040, classes: 0107C388, date: 2012/03/01 - 2012/03/31, name: Nordic 3
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 9, id: 6050, classes: 010004F2, date: 2011/08/12 - 2011/08/30, name: TSS
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 10, id: 6050, classes: 010004F2, date: 1990/01/01 - 1990/01/01, name: TSS
[2014-10-25 12:48:46] - 12:48:46 20061020 r reader1 [conax] Package: 11, id: 6060, classes: 016BAF2F, date: 2012/04/01 - 2012/04/30, name: Nordic 4
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 12, id: 6060, classes: 016BAFAF, date: 2012/03/01 - 2012/03/31, name: Nordic 4
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 13, id: 6070, classes: 01601100, date: 2012/04/01 - 2012/04/30, name: Nordic 5
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 14, id: 6070, classes: 01601100, date: 2012/03/01 - 2012/03/31, name: Nordic 5
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 15, id: 6080, classes: 01048000, date: 2012/04/01 - 2012/04/30, name: HD
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 16, id: 6080, classes: 01048000, date: 2012/03/01 - 2012/03/31, name: HD
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 17, id: 8010, classes: 01000020, date: 2014/10/01 - 2014/10/31, name: 8010
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 18, id: 8010, classes: 01000020, date: 2014/04/01 - 2014/04/30, name: 8010
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 19, id: 8011, classes: 01000040, date: 2014/10/01 - 2014/10/31, name: 8011
[2014-10-25 12:48:47] - 12:48:46 20061020 r reader1 [conax] Package: 20, id: 8011, classes: 01000040, date: 2014/04/01 - 2014/04/30, name: 8011
[2014-10-25 12:48:47] - 12:48:47 20061020 r reader1 [conax] Package: 21, id: 8013, classes: 01000010, date: 2014/10/01 - 2014/10/31, name: 8013
[2014-10-25 12:48:47] - 12:48:47 20061020 r reader1 [conax] Package: 22, id: 8013, classes: 01000010, date: 2014/04/01 - 2014/04/30, name: 8013
[2014-10-25 12:48:47] - 12:48:47 20061020 r reader1 [conax] ready for requests

MVH

[atomized]

Men kortläsaren hittas och kortet hittas för oscam klarar att läsa ut rätt ATR från kortet. Så viss kommunikation med kortet fungerar men sedan skiter det sig av någon anledning.

Det är svårt att gissa varför. Vad har du för dator? Ev. kan det vara problem med att spänningen på USB-porten inte räcker till. Det kan vara värt att prova att koppla in kortläsaren via en USB-hub med egen spänningsmatning om du har den möjligheten. Kan också vara värt att prova en annan USB-port på datorn.

Annars är det väl bara att titta över kablar och kontakter så att det inte är något glapp eller liknande.

[nissek]

vad betyder ready for requests

OK! Skall pröva med strömförsörjande usb.
Tackar så mycket för all hjälp
MVH