Artikel: Oscam (och CSP) på Raspberry Pi för nybörjare

[atomized]

Hej,

Jeg forsøger at få min Raspberry Pi til at virke med OSCAM og en HID Omnikey CardMan 3021 men har lidt udfordringer.

Jeg har fulgt jeres guide, men før følgende fejl i min log:

2015/06/21 21:55:14 00000000 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10777 (arm-linux-gnueabihf)
2015/06/21 21:55:14 00000000 s (main) System name = Linux
2015/06/21 21:55:14 00000000 s (main) Host name = raspberrypi
2015/06/21 21:55:14 00000000 s (main) Release = 3.18.11-v7+
2015/06/21 21:55:14 00000000 s (main) Version = #781 SMP PREEMPT Tue Apr 21 18:07:59 BST 2015
2015/06/21 21:55:14 00000000 s (main) Machine = armv7l
2015/06/21 21:55:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2407
2015/06/21 21:55:14 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/06/21 21:55:14 00000000 s (main) signal handling initialized
2015/06/21 21:55:14 00000000 s (net) monitor: initialized (fd=6, port=988)
2015/06/21 21:55:14 00000000 s (net) newcamd: initialized (fd=7, port=10001)
2015/06/21 21:55:14 00000000 s (net) -> CAID: 0B00 PROVID: 000000
2015/06/21 21:55:14 00000000 s (net) cccam: initialized (fd=8, port=10009)
2015/06/21 21:55:14 00000000 s (reader) Reader1 [pcsc] creating thread for device 0
2015/06/21 21:55:14 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/06/21 21:55:14 00000000 s (main) waiting for local card init
2015/06/21 21:55:14 00E03CB8 r (reader) Reader1 [pcsc] Cannot open device: 0
2015/06/21 21:55:14 00E03630 h (webif) webif: decompressed 161171 bytes back into 384892 bytes
2015/06/21 21:55:14 00E03630 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
2015/06/21 21:55:16 00E03CB8 r (reader) Reader1 [pcsc] Cannot open device: 0


Hvis man kigger i syslog så skriver den:
Jun 21 21:53:01 raspberrypi kernel: [ 3.306049] smsc95xx v1.0.4
Jun 21 21:53:01 raspberrypi kernel: [ 3.372320] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4$
Jun 21 21:53:01 raspberrypi kernel: [ 3.628149] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
Jun 21 21:53:01 raspberrypi kernel: [ 3.779303] usb 1-1.4: New USB device found, idVendor=076b, idProduct=3022
Jun 21 21:53:01 raspberrypi kernel: [ 3.788271] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 21 21:53:01 raspberrypi kernel: [ 3.797592] usb 1-1.4: Product: Smart Card Reader USB
Jun 21 21:53:01 raspberrypi kernel: [ 3.804978] usb 1-1.4: Manufacturer: OMNIKEY AG


Så... den kan godt finde min kortlæser, men spørgsmålet er om jeg har brugt det rigtige Device (Device = 0)

Er der nogen der kan hjælpe?

Ps. Jeg har ændret min oscam.server til at have caid=093E og desuden indtastet BoxID (Viasat)

Har du gjort den workaround som jag hänvisar till i början på guiden om du läser om kortläsare under "saker att skaffa"?
Nyare Omnikey läsare behöver ett litet hack i en av filerna som hör till pcscd i Linux.
http://www.comhit.net/showthread.php...l=1#post226561