felsökningshjälp please! får inte igång min DM800SE clone med Oscam

[pic16f84]

jag har försökt allt, men får inte igång min nya DM800SE Wi-fi clon
mitt system är : Dm800se med lt7 image och mgcamd samt win Xp dator cardreader från AD-teknik med OScam server.
nätverket är trådlöst och jag hittar alla enheter med Ecc-e2.
innan mina frågor så måste jag kanske förklara läget. Jag har lyckats installera Mgcamd i boxen och valt den som aktiv i menyn, men ingen bild, bara svart och inga fel kommandon typ "kodad kanal" eller liknande. jag verkar även har lyckats installera Oscam server i datorn och kollar man logfilerna där så finns det inga problem men jag vet inte om felet är i datorn/oscam eller i boxen. Boxen är installerad med de satelliter (Thor 0,9gW) som jag använder och nätverket är även ok. Boxen visar dom okodade kanalerna helt ok, men som sagt inte de kodade. och jag har mitt org. C**** D****** kort som funkar ok på min org.box.

fråga nr 1: Hur kan jag logga / se trafiken(CW?) som boxen skickar till servern/kortet, så att jag kan veta om felet sitter i boxen eller att mgcamd inte funkar?

fråga 2: hur startar man oscam så att man kan "se" trafiken mellan serv-box i realtid?

fråga 3:a om jag startar oscam med : oscam -c conf så får jag ingen loggfil - varför?
b: om jag istället startar med oscam -b så får jag en loggfil men då ser jag inte nåt i dosfönstret varför?
c: om jag startar genom att klicka på exe-filen så får jag en loggfil men ingen info i starten. Hur startas oscam i logg-läge?
Jag har alla filer i samma mapp på datorn och en mapp döpt till logg

fråga4 : hur börjar jag felsökningen ?

jag har loggfiler från servern som jag kan bifoga, om någon snäll individ kan hjälpa mig att få igång boxen med mitt org. kort i oscamservern
mitt syfte är naturligtvis BARA att dela kortet till övriga boxar (ev.framtida inköp) i hushållet och jag kan ju inte köpa några om jag inte ens får igång en box.

[micklarn]

Mitt tips: Börja med att installera Oscam i boxen så att du får bild. Sen kan du laborera med andra lösningar.

[atomized]

En bra början är väl om du vill lägga upp dina config-filer här. Från oscam behövs oscam.conf, oscam.server och oscam.user. Från mgcamd behövs newcamd.list. Så kan vi kolla om konfigurationen ser vettig ut.

En annan sak att tänka på om du kör servern på en Windowsdator är att brandväggen i Windows ofta blockerar så det kan vara värt att tillfälligt slå av den när man testar.

[pic16f84]

En bra början är väl om du vill lägga upp dina config-filer här. Från oscam behövs oscam.conf, oscam.server och oscam.user. Från mgcamd behövs newcamd.list. Så kan vi kolla om konfigurationen ser vettig ut.

En annan sak att tänka på om du kör servern på en Windowsdator är att brandväggen i Windows ofta blockerar så det kan vara värt att tillfälligt slå av den när man testar.

ok ! här kommer mina filer:

oscam.conf:

#
# main configuration
#

[global]
nice = -1
WaitForCards = 1

# logging
logfile = log/oscam.log
maxlogsize = 1000
usrfile = log/oscamuser.log
cwlogdir = log/cw
# saveinithistory = 1
# monitor

[monitor]
port = 988
serverip = 0.0.0.0
nocrypt = 127.0.0.1
aulow = 120
monlevel = 4
# appendchaninfo = 1

# web interface

[webif]
httpport = 8888
httpuser = Admin
httppwd = OSCam
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.254
httphideidleclients = 0
httpreadonly = 0
# protocols

[newcamd]
key = 000102030405060708090A0B0C0D
port = 10001@0B00:000000;10002@093E:000000;10003@0500:023 200,023210,023220,023230,023240,FFF510

[radegast]
port = 20000
user = user1
allowed = 192.168.0.0-192.168.255.255

[cs378x]
port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0 300:FFFFFF

[cccam]
port = 40000
version = 1.2.3
build = 1234
reshare = 2

[gbox]
password = password1
maxdist = 4
cardinfos = card.infos
ignorelist = ignore.list
onlineinfos = online.infos
locals = 01000000,02000000,0300FFFF

[serial]
# device = user2@/dev/ttyS0?delay=1&timeout=300

[dvbapi]
enabled = 1
user = user1
demux = /dev/dvb/adapter0/demux0
ca = /dev/dvb/adapter0/ca1
socket = /tmp/camd.socket

oscam.server:

#
# reader configuration
#

# serial reader

[reader]
label = canaldigital
enable = 1
protocol = mouse
detect = CD
device = /dev/ttyS2
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
services = services1
caid = 0B00

# USB serial reader

[reader]
# label = viasat
# protocol = mouse
# detect = CD
# device = /dev/ttyUSB0
# aeskey = 000102030405060708090A0B0C0D0E0F
# group = 1
# emmcache = 1,3,2
# services = services1
# caid = 093e
# BoxID = xxxxxx (skriv in din boxid och ta bort denna text)

# remote newcamd reader with fallback for group 1

[reader]
# label = remote1
# protocol = newcamd
# key = 0102030405060708091011121314
# device = 192.168.0.2,66666
# account = login1,password1
# group = 1
# fallback = 1

# remote camd 3.78x reader with fallback for group 2

[reader]
# label = remote2
# protocol = cs378x
# device = 192.168.0.3,23456
# account = login2,password2
# group = 2
# fallback = 1

# remote gbox reader

[reader]
# label = remote3
# protocol = gbox
# device = 192.168.0.4,34567,45678
# account = login3,password3
# group = 3
# caid = 0300

# Smargo Smartreader+

[reader]
# label = mysmartreader
# protocol = smartreader
# device = 001:002
# aeskey = 0102030405060708090a0b0c0d0e0f10
# group = 7
# caid = 0700

# internal reader

[reader]
# label = myinternalreader
# protocol = internal
# device = /dev/sci0
# group = 8
# caid = 0800


oscam.user:

#
# user configuration
#

# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled

[account]
# user = username
# pwd = lösen
# monlevel = 0
# uniq = 1
# group = 1
# au = viasat
# services = services1
# betatunnel = 0300.FFFF:0100,0400.FFFF:0100
# ident = 093e:000000
# caid = 093e

# user for group 2 with monitor access, AU enabled

[account]
user = user2
pwd = password2
monlevel = 1
uniq = 0
group = 2
au = reader1
services = services1
ident = 0B00:000000
caid = 0B00

# user for group 2 without monitor access, AU disabled, account disabled

[account]
user = user3
pwd = password3
disabled = 1
group = 2
services = services2
ident = 0200:000000
caid = 0200

# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents

[account]
user = user4
pwd = password4
disabled = 1
monlevel = 0
uniq = 1
group = 3
ident = 0300:000000,FFFFFF;0400:FFFFFF
caid = 0300


newcamd.list:

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 10001
CWS = 192.168.0.250 10001 user2 password2 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1
CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2

[pic16f84]

Mitt tips: Börja med att installera Oscam i boxen så att du får bild. Sen kan du laborera med andra lösningar.

tack! bra tips. Jag ska testa med det om jag inte får igång det mot datorn.
Hur installerar man Oscam i boxen? med FTP via DCCe2?

[Kammaflaje]

Sist jag gjorde det (evigheter sen) så gjorde jag det via plugin menyn på boxen. Fast jag använder Newnigma som jag anser är mycket bättre än Openpli (oftast är det en smaksak)

[matkoh]

Hmmmm.

Men snälla. När ni postar config-filer ta då BORT kommentarsrader !!! Dvs. de raderna som börjar med # (eller <!-- --> i .xml)

[Kammaflaje]

Hmmmm.

Men snälla. När ni postar config-filer ta då BORT kommentarsrader !!! Dvs. de raderna som börjar med # (eller <!-- --> i .xml)

Tycker det är lättare att se med dem. Så man vet exakt vad det är för något då jag inte är så ofta inne och rotar i oscam längre.

[atomized]

Ändra din newcamd.list till:

CWS_KEEPALIVE = 300
CWS = 192.168.0.250 10001 user2 password2 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D lan server1

Största felet var att din DES-key inte stämmer.
Sedan kan du städa upp lite i oscam.conf också. Ändra denna rad under [newcamd] till:
port = 10001@0B00:000000
och ta bort det som kommer efter.

Du kan också ta bort alla sektioner som heter [radegast], [cs378x], [cccam], [gbox] och [serial]. [dvbapi] behövs inte heller om du kör på en PC.

[pic16f84]

Ändra din newcamd.list till:

CWS_KEEPALIVE = 300
CWS = 192.168.0.250 10001 user2 password2 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D lan server1

Största felet var att din DES-key inte stämmer.
Sedan kan du städa upp lite i oscam.conf också. Ändra denna rad under [newcamd] till:
port = 10001@0B00:000000
och ta bort det som kommer efter.

Du kan också ta bort alla sektioner som heter [radegast], [cs378x], [cccam], [gbox] och [serial]. [dvbapi] behövs inte heller om du kör på en PC.

jag har testat med dina förändringar (tusen tack) , men svart i rutan jag får fortsätta.
jag klistrar in en loggfil från servern, och det verkar vara nåt fel med kortläsaren - vad tror du ?


2013/10/31 20:40:14 20063F78 r canaldigital [mouse] ERROR: Opening device /dev/ttyS2 (errno=13 Permission denied)
2013/10/31 20:40:14 20063F78 r canaldigital [mouse] Cannot open device: /dev/ttyS2

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Oct 31 20:40:22 2013
-------------------------------------------------------------------------------
2013/10/31 20:40:22 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8907 (i686-pc-cygwin)
2013/10/31 20:40:22 0 s creating pidfile /DOCUME~1/THORNE~1/LOCALS~1/Temp/_oscam/oscam.pid with pid 2748
2013/10/31 20:40:22 0 s userdb reloaded: 4 accounts loaded, 0 expired, 2 disabled
2013/10/31 20:40:22 0 s signal handling initialized
2013/10/31 20:40:22 0 s monitor: initialized (fd=5, port=988)
2013/10/31 20:40:22 0 s newcamd: Bind request failed (Address already in use), waiting another 119 seconds
2013/10/31 20:40:23 0 s newcamd: Bind request failed (Address already in use), waiting another 118 seconds
2013/10/31 20:40:24 0 s newcamd: Bind request failed (Address already in use), waiting another 117 seconds
2013/10/31 20:40:25 0 s newcamd: Bind request failed (Address already in use), waiting another 116 seconds
2013/10/31 20:40:26 0 s newcamd: Bind request failed (Address already in use), waiting another 115 seconds
2013/10/31 20:40:27 0 s newcamd: Bind request failed (Address already in use), waiting another 114 seconds
2013/10/31 20:40:28 0 s newcamd: Bind request failed (Address already in use), waiting another 113 seconds
2013/10/31 20:40:29 0 s newcamd: Bind request failed (Address already in use), waiting another 112 seconds
2013/10/31 20:40:30 0 s newcamd: Bind request failed (Address already in use), waiting another 111 seconds
2013/10/31 20:40:31 0 s newcamd: Bind request failed (Address already in use), waiting another 110 seconds
2013/10/31 20:40:32 0 s newcamd: Bind request failed (Address already in use), waiting another 109 seconds
2013/10/31 20:40:33 0 s newcamd: Bind request failed (Address already in use), waiting another 108 seconds
2013/10/31 20:40:34 0 s newcamd: Bind request failed (Address already in use), waiting another 107 seconds
2013/10/31 20:40:35 0 s newcamd: Bind request failed (Address already in use), waiting another 106 seconds
2013/10/31 20:40:36 0 s newcamd: Bind request failed (Address already in use), waiting another 105 seconds
2013/10/31 20:40:37 0 s newcamd: Bind request failed (Address already in use), waiting another 104 seconds
2013/10/31 20:40:38 0 s newcamd: Bind request failed (Address already in use), waiting another 103 seconds
2013/10/31 20:40:39 0 s newcamd: Bind request failed (Address already in use), waiting another 102 seconds
2013/10/31 20:40:40 0 s newcamd: Bind request failed (Address already in use), waiting another 101 seconds
2013/10/31 20:40:41 0 s newcamd: Bind request failed (Address already in use), waiting another 100 seconds
2013/10/31 20:40:42 0 s newcamd: Bind request failed (Address already in use), waiting another 99 seconds
2013/10/31 20:40:43 0 s newcamd: Bind request failed (Address already in use), waiting another 98 seconds
2013/10/31 20:40:44 0 s newcamd: Bind request failed (Address already in use), waiting another 97 seconds
2013/10/31 20:40:45 0 s newcamd: Bind request failed (Address already in use), waiting another 96 seconds
2013/10/31 20:40:46 0 s newcamd: Bind request failed (Address already in use), waiting another 95 seconds
2013/10/31 20:40:47 0 s newcamd: Bind request failed (Address already in use), waiting another 94 seconds
2013/10/31 20:40:48 0 s newcamd: Bind request failed (Address already in use), waiting another 93 seconds
2013/10/31 20:40:49 0 s newcamd: Bind request failed (Address already in use), waiting another 92 seconds
2013/10/31 20:40:50 0 s newcamd: Bind request failed (Address already in use), waiting another 91 seconds
2013/10/31 20:40:51 0 s newcamd: Bind request failed (Address already in use), waiting another 90 seconds
2013/10/31 20:40:52 0 s newcamd: Bind request failed (Address already in use), waiting another 89 seconds
2013/10/31 20:40:53 0 s newcamd: Bind request failed (Address already in use), waiting another 88 seconds
2013/10/31 20:40:54 0 s newcamd: Bind request failed (Address already in use), waiting another 87 seconds
2013/10/31 20:40:55 0 s newcamd: Bind request failed (Address already in use), waiting another 86 seconds
2013/10/31 20:40:56 0 s newcamd: Bind request failed (Address already in use), waiting another 85 seconds
2013/10/31 20:40:57 0 s newcamd: Bind request failed (Address already in use), waiting another 84 seconds
2013/10/31 20:40:58 0 s newcamd: Bind request failed (Address already in use), waiting another 83 seconds
2013/10/31 20:40:59 0 s newcamd: Bind request failed (Address already in use), waiting another 82 seconds
2013/10/31 20:41:00 0 s newcamd: Bind request failed (Address already in use), waiting another 81 seconds
2013/10/31 20:41:01 0 s newcamd: Bind request failed (Address already in use), waiting another 80 seconds
2013/10/31 20:41:02 0 s newcamd: Bind request failed (Address already in use), waiting another 79 seconds
2013/10/31 20:41:03 0 s newcamd: Bind request failed (Address already in use), waiting another 78 seconds
2013/10/31 20:41:04 0 s newcamd: Bind request failed (Address already in use), waiting another 77 seconds
2013/10/31 20:41:05 0 s newcamd: Bind request failed (Address already in use), waiting another 76 seconds
2013/10/31 20:41:06 0 s newcamd: Bind request failed (Address already in use), waiting another 75 seconds
2013/10/31 20:41:07 0 s newcamd: Bind request failed (Address already in use), waiting another 74 seconds
2013/10/31 20:41:08 0 s newcamd: Bind request failed (Address already in use), waiting another 73 seconds
2013/10/31 20:41:09 0 s newcamd: Bind request failed (Address already in use), waiting another 72 seconds
2013/10/31 20:41:10 0 s newcamd: Bind request failed (Address already in use), waiting another 71 seconds
2013/10/31 20:41:11 0 s newcamd: Bind request failed (Address already in use), waiting another 70 seconds
2013/10/31 20:41:12 0 s newcamd: Bind request failed (Address already in use), waiting another 69 seconds
2013/10/31 20:41:13 0 s newcamd: Bind request failed (Address already in use), waiting another 68 seconds
2013/10/31 20:41:14 20063F78 r canaldigital [mouse] ERROR: Opening device /dev/ttyS2 (errno=13 Permission denied)
2013/10/31 20:41:14 20063F78 r canaldigital [mouse] Cannot open device: /dev/ttyS2
2013/10/31 20:41:14 0 s newcamd: Bind request failed (Address already in use), waiting another 67 seconds
2013/10/31 20:41:15 0 s newcamd: Bind request failed (Address already in use), waiting another 66 seconds
2013/10/31 20:41:16 0 s newcamd: Bind request failed (Address already in use), waiting another 65 seconds
2013/10/31 20:41:17 0 s newcamd: Bind request failed (Address already in use), waiting another 64 seconds
2013/10/31 20:41:18 0 s newcamd: Bind request failed (Address already in use), waiting another 63 seconds
2013/10/31 20:41:19 0 s newcamd: Bind request failed (Address already in use), waiting another 62 seconds
2013/10/31 20:41:20 0 s newcamd: Bind request failed (Address already in use), waiting another 61 seconds
2013/10/31 20:41:21 0 s newcamd: Bind request failed (Address already in use), waiting another 60 seconds
2013/10/31 20:41:22 0 s newcamd: Bind request failed (Address already in use), waiting another 59 seconds
2013/10/31 20:41:23 0 s newcamd: Bind request failed (Address already in use), waiting another 58 seconds
2013/10/31 20:41:24 0 s newcamd: Bind request failed (Address already in use), waiting another 57 seconds
2013/10/31 20:41:25 0 s newcamd: Bind request failed (Address already in use), waiting another 56 seconds
2013/10/31 20:41:26 0 s newcamd: Bind request failed (Address already in use), waiting another 55 seconds
2013/10/31 20:41:27 0 s newcamd: Bind request failed (Address already in use), waiting another 54 seconds
2013/10/31 20:41:28 0 s newcamd: Bind request failed (Address already in use), waiting another 53 seconds
2013/10/31 20:41:29 0 s newcamd: Bind request failed (Address already in use), waiting another 52 seconds
2013/10/31 20:41:30 0 s newcamd: Bind request failed (Address already in use), waiting another 51 seconds
2013/10/31 20:41:31 0 s newcamd: Bind request failed (Address already in use), waiting another 50 seconds
2013/10/31 20:41:32 0 s newcamd: Bind request failed (Address already in use), waiting another 49 seconds
2013/10/31 20:41:33 0 s newcamd: Bind request failed (Address already in use), waiting another 48 seconds
2013/10/31 20:41:34 0 s newcamd: Bind request failed (Address already in use), waiting another 47 seconds
2013/10/31 20:41:35 0 s newcamd: Bind request failed (Address already in use), waiting another 46 seconds
2013/10/31 20:41:36 0 s newcamd: Bind request failed (Address already in use), waiting another 45 seconds
2013/10/31 20:41:37 0 s newcamd: Bind request failed (Address already in use), waiting another 44 seconds
2013/10/31 20:41:38 0 s newcamd: Bind request failed (Address already in use), waiting another 43 seconds
2013/10/31 20:41:39 0 s newcamd: Bind request failed (Address already in use), waiting another 42 seconds
2013/10/31 20:41:40 0 s newcamd: Bind request failed (Address already in use), waiting another 41 seconds
2013/10/31 20:41:41 0 s newcamd: Bind request failed (Address already in use), waiting another 40 seconds
2013/10/31 20:41:42 0 s newcamd: Bind request failed (Address already in use), waiting another 39 seconds
2013/10/31 20:41:43 0 s newcamd: Bind request failed (Address already in use), waiting another 38 seconds
2013/10/31 20:41:44 0 s newcamd: Bind request failed (Address already in use), waiting another 37 seconds
2013/10/31 20:41:45 0 s newcamd: Bind request failed (Address already in use), waiting another 36 seconds
2013/10/31 20:41:46 0 s newcamd: Bind request failed (Address already in use), waiting another 35 seconds
2013/10/31 20:41:47 0 s newcamd: Bind request failed (Address already in use), waiting another 34 seconds
2013/10/31 20:41:48 0 s newcamd: Bind request failed (Address already in use), waiting another 33 seconds
2013/10/31 20:41:49 0 s newcamd: Bind request failed (Address already in use), waiting another 32 seconds
2013/10/31 20:41:50 0 s newcamd: Bind request failed (Address already in use), waiting another 31 seconds
2013/10/31 20:41:51 0 s newcamd: Bind request failed (Address already in use), waiting another 30 seconds
2013/10/31 20:41:52 0 s newcamd: Bind request failed (Address already in use), waiting another 29 seconds
2013/10/31 20:41:53 0 s newcamd: Bind request failed (Address already in use), waiting another 28 seconds
2013/10/31 20:41:54 0 s newcamd: Bind request failed (Address already in use), waiting another 27 seconds
2013/10/31 20:41:55 0 s newcamd: Bind request failed (Address already in use), waiting another 26 seconds
2013/10/31 20:41:56 0 s newcamd: Bind request failed (Address already in use), waiting another 25 seconds
2013/10/31 20:41:57 0 s newcamd: Bind request failed (Address already in use), waiting another 24 seconds
2013/10/31 20:41:58 0 s newcamd: Bind request failed (Address already in use), waiting another 23 seconds
2013/10/31 20:41:59 0 s newcamd: Bind request failed (Address already in use), waiting another 22 seconds
2013/10/31 20:42:00 0 s newcamd: Bind request failed (Address already in use), waiting another 21 seconds
2013/10/31 20:42:01 0 s newcamd: Bind request failed (Address already in use), waiting another 20 seconds
2013/10/31 20:42:02 0 s newcamd: Bind request failed (Address already in use), waiting another 19 seconds
2013/10/31 20:42:03 0 s newcamd: Bind request failed (Address already in use), waiting another 18 seconds
2013/10/31 20:42:04 0 s newcamd: Bind request failed (Address already in use), waiting another 17 seconds
2013/10/31 20:42:05 0 s newcamd: Bind request failed (Address already in use), waiting another 16 seconds
2013/10/31 20:42:06 0 s newcamd: Bind request failed (Address already in use), waiting another 15 seconds
2013/10/31 20:42:07 0 s newcamd: Bind request failed (Address already in use), waiting another 14 seconds
2013/10/31 20:42:08 0 s newcamd: Bind request failed (Address already in use), waiting another 13 seconds
2013/10/31 20:42:09 0 s newcamd: Bind request failed (Address already in use), waiting another 12 seconds
2013/10/31 20:42:10 0 s newcamd: Bind request failed (Address already in use), waiting another 11 seconds
2013/10/31 20:42:11 0 s newcamd: Bind request failed (Address already in use), waiting another 10 seconds
2013/10/31 20:42:12 0 s newcamd: Bind request failed (Address already in use), waiting another 9 seconds
2013/10/31 20:42:13 0 s newcamd: Bind request failed (Address already in use), waiting another 8 seconds
2013/10/31 20:42:13 20063F78 r canaldigital [mouse] ERROR: Opening device /dev/ttyS2 (errno=13 Permission denied)
2013/10/31 20:42:13 20063F78 r canaldigital [mouse] Cannot open device: /dev/ttyS2
2013/10/31 20:42:14 0 s newcamd: Bind request failed (Address already in use), waiting another 7 seconds
2013/10/31 20:42:15 0 s newcamd: Bind request failed (Address already in use), waiting another 6 seconds
2013/10/31 20:42:16 0 s newcamd: Bind request failed (Address already in use), waiting another 5 seconds
2013/10/31 20:42:17 0 s newcamd: Bind request failed (Address already in use), waiting another 4 seconds
2013/10/31 20:42:18 0 s newcamd: Bind request failed (Address already in use), waiting another 3 seconds
2013/10/31 20:42:19 0 s newcamd: Bind request failed (Address already in use), waiting another 2 seconds
2013/10/31 20:42:20 0 s newcamd: Bind request failed (Address already in use), waiting another 1 seconds
2013/10/31 20:42:21 0 s newcamd: Bind request failed (Address already in use), giving up
2013/10/31 20:42:21 20061248 h webif: decompressed 52875 bytes back into 152168 bytes
2013/10/31 20:42:21 20061248 h HTTP Server couldn't bind on port 8888 (errno=112 Address already in use). Not starting HTTP!
2013/10/31 20:42:21 0 s canaldigital [mouse] creating thread for device /dev/ttyS2
2013/10/31 20:42:21 20063F38 r canaldigital [mouse] ERROR: Opening device /dev/ttyS2 (errno=13 Permission denied)
2013/10/31 20:42:21 20063F38 r canaldigital [mouse] Cannot open device: /dev/ttyS2
2013/10/31 20:42:21 0 s loadbalancer: can't read from file /DOCUME~1/THORNE~1/LOCALS~1/Temp/_oscam/stat
2013/10/31 20:42:21 0 s waiting for local card init
2013/10/31 20:43:13 20063F78 r canaldigital [mouse] ERROR: Opening device /dev/ttyS2 (errno=13 Permission denied)
2013/10/31 20:43:13 20063F78 r canaldigital [mouse] Cannot open device: /dev/ttyS2
2013/10/31 20:43:21 20063F38 r canaldigital [mouse] ERROR: Opening device /dev/ttyS2 (errno=13 Permission denied)
2013/10/31 20:43:21 20063F38 r canaldigital [mouse] Cannot open device: /dev/ttyS2