felsökningshjälp please! får inte igång min DM800SE clone med Oscam

[atomized]

En bra början är väl om du vill lägga upp dina config-filer här. Från oscam behövs oscam.conf, oscam.server och oscam.user. Från mgcamd behövs newcamd.list. Så kan vi kolla om konfigurationen ser vettig ut.

En annan sak att tänka på om du kör servern på en Windowsdator är att brandväggen i Windows ofta blockerar så det kan vara värt att tillfälligt slå av den när man testar.

[pic16f84]

En bra början är väl om du vill lägga upp dina config-filer här. Från oscam behövs oscam.conf, oscam.server och oscam.user. Från mgcamd behövs newcamd.list. Så kan vi kolla om konfigurationen ser vettig ut.

En annan sak att tänka på om du kör servern på en Windowsdator är att brandväggen i Windows ofta blockerar så det kan vara värt att tillfälligt slå av den när man testar.

ok ! här kommer mina filer:

oscam.conf:

#
# main configuration
#

[global]
nice = -1
WaitForCards = 1

# logging
logfile = log/oscam.log
maxlogsize = 1000
usrfile = log/oscamuser.log
cwlogdir = log/cw
# saveinithistory = 1
# monitor

[monitor]
port = 988
serverip = 0.0.0.0
nocrypt = 127.0.0.1
aulow = 120
monlevel = 4
# appendchaninfo = 1

# web interface

[webif]
httpport = 8888
httpuser = Admin
httppwd = OSCam
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.254
httphideidleclients = 0
httpreadonly = 0
# protocols

[newcamd]
key = 000102030405060708090A0B0C0D
port = 10001@0B00:000000;10002@093E:000000;10003@0500:023 200,023210,023220,023230,023240,FFF510

[radegast]
port = 20000
user = user1
allowed = 192.168.0.0-192.168.255.255

[cs378x]
port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0 300:FFFFFF

[cccam]
port = 40000
version = 1.2.3
build = 1234
reshare = 2

[gbox]
password = password1
maxdist = 4
cardinfos = card.infos
ignorelist = ignore.list
onlineinfos = online.infos
locals = 01000000,02000000,0300FFFF

[serial]
# device = user2@/dev/ttyS0?delay=1&timeout=300

[dvbapi]
enabled = 1
user = user1
demux = /dev/dvb/adapter0/demux0
ca = /dev/dvb/adapter0/ca1
socket = /tmp/camd.socket

oscam.server:

#
# reader configuration
#

# serial reader

[reader]
label = canaldigital
enable = 1
protocol = mouse
detect = CD
device = /dev/ttyS2
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
services = services1
caid = 0B00

# USB serial reader

[reader]
# label = viasat
# protocol = mouse
# detect = CD
# device = /dev/ttyUSB0
# aeskey = 000102030405060708090A0B0C0D0E0F
# group = 1
# emmcache = 1,3,2
# services = services1
# caid = 093e
# BoxID = xxxxxx (skriv in din boxid och ta bort denna text)

# remote newcamd reader with fallback for group 1

[reader]
# label = remote1
# protocol = newcamd
# key = 0102030405060708091011121314
# device = 192.168.0.2,66666
# account = login1,password1
# group = 1
# fallback = 1

# remote camd 3.78x reader with fallback for group 2

[reader]
# label = remote2
# protocol = cs378x
# device = 192.168.0.3,23456
# account = login2,password2
# group = 2
# fallback = 1

# remote gbox reader

[reader]
# label = remote3
# protocol = gbox
# device = 192.168.0.4,34567,45678
# account = login3,password3
# group = 3
# caid = 0300

# Smargo Smartreader+

[reader]
# label = mysmartreader
# protocol = smartreader
# device = 001:002
# aeskey = 0102030405060708090a0b0c0d0e0f10
# group = 7
# caid = 0700

# internal reader

[reader]
# label = myinternalreader
# protocol = internal
# device = /dev/sci0
# group = 8
# caid = 0800


oscam.user:

#
# user configuration
#

# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled

[account]
# user = username
# pwd = lösen
# monlevel = 0
# uniq = 1
# group = 1
# au = viasat
# services = services1
# betatunnel = 0300.FFFF:0100,0400.FFFF:0100
# ident = 093e:000000
# caid = 093e

# user for group 2 with monitor access, AU enabled

[account]
user = user2
pwd = password2
monlevel = 1
uniq = 0
group = 2
au = reader1
services = services1
ident = 0B00:000000
caid = 0B00

# user for group 2 without monitor access, AU disabled, account disabled

[account]
user = user3
pwd = password3
disabled = 1
group = 2
services = services2
ident = 0200:000000
caid = 0200

# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents

[account]
user = user4
pwd = password4
disabled = 1
monlevel = 0
uniq = 1
group = 3
ident = 0300:000000,FFFFFF;0400:FFFFFF
caid = 0300


newcamd.list:

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 10001
CWS = 192.168.0.250 10001 user2 password2 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1
CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2