ffdecsawrapper kontra sasc-ng

[Tillda]

Hej Har installerat driver samt patch. När jag kör scriptet får jag fel sökväg. Har använt ./configure --dvb_dir=~/dvb/linux-tbs-drivers. Får då fel meddelande vad är fel?

Could not locate any of the following:

/home/htpc/dvb/linux-tbs-drivers/drivers/media/dvb-core/dvbdev.h

/home/htpc/dvb/linux-tbs-drivers/drivers/media/dvb/dvb-core/dvbdev.h

Aborting..

[Tillda]

Hittade felet ./configure --dvb_dir=~/dvb/linux-tbs-drivers/linux

[Tillda]

Erik tror jag gör fel när jag patchar tbs drivers. Kan du förklara steg för steg denna process?

[Erik-NA]

Kolla denna guide, kapitlet om TBS-drivern

http://www.comhit.net/showthread.php...-Canal-Digital

[Tillda]

Tack tror jag fått till det. Jag har 3 st TBS kort är nedan rätt?

ADAPTERS="2"
NUMADAPTERS="3"
JOIN="--join 0:3 --join 1:4 --join 2:5"



Dec 15 16:16:50.189 frontend: Starting thread on /dev/dvb/adapter3/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:50.189 demux: Starting thread on /dev/dvb/adapter3/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:50.189 dvr: Starting thread on /dev/dvb/adapter3/dvr1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:51.205 frontend: Starting thread on /dev/dvb/adapter4/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:51.205 dvr: Starting thread on /dev/dvb/adapter4/dvr1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:51.205 demux: Starting thread on /dev/dvb/adapter4/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:52.222 frontend: Starting thread on /dev/dvb/adapter5/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:52.222 dvr: Starting thread on /dev/dvb/adapter5/dvr1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:52.222 demux: Starting thread on /dev/dvb/adapter5/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Dec 15 16:16:52.223 : Listening on port 5456
sched_setscheduler: Operation not permitted

[Erik-NA]

Det ser rätt ut. Har du tre TBS-kort eller tre adaptrar på ditt kort?
Du kan ju själv kontrollera vad de fysiska adaptrarna får för adress under /dev/dvb genom att köra "ls /dev/dvb"

[Tillda]

Tackar nu fungerar det som det ska adapter0 adapter1 adapter2 adapter3 adapter4 adapter5. Har bara ett problem kvar är hela tiden tvungen att starta ffdecsawrapper manuellt.
htpc@htpcdator:~$ sudo update-rc.d ffdecsawrapper defaults
[sudo] password for htpc:
System start/stop links for /etc/init.d/ffdecsawrapper already exist.

Vad gör jag för fel?