Tak til piphulu - jag provade det på min DM8000HD clone og alt det her kom.
BCM97400
AB
001A168C
1s
Sync=0
LLMB=0
L2=0
RAC_I=0
RAC_D=0
Copy Code...34TUCV
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM8000
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build 87F (2012-02-02)
0.000 - BCM board setup
Configure MEMC1_2........ Done
0.039 - fp init
FP version 7 detected
0.106 - ca init
0.482 - load config
1.062 - config loaded.
* press [S] to enter setup
OLED found!
lcd: BOOT 87F
- NAND PROBE: 2c da 80 95 (normal)
- read config file: /boot/secondstage.conf
detected jffs2 blocksize: 128kb
+++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUU
dreamupd initialized
Scanning JFFS2 FS: . done.
find_inode failed for name=secondstage.conf
load: Failed to find inode
- failed to open /boot/secondstage.conf
- failed to open /cf/autorun.bat
lcd: /flash/bootlogo.elf
bootlogo size: 457522
Supported modes: NTSC !NTSC_J !NTSC_443 !PAL_B !PAL_B1 !PAL_D !PAL_D1 PAL_G !PAL _H !PAL_K !PAL_I !PAL_M !PAL_N !PAL_NC !PAL_60 !SECAM_L !SECAM_B !SECAM_G !SECAM _D !SECAM_K !SECAM_H 1080i !1080p 720p 480p 1080i_50Hz 1080p_24Hz 1080p_25Hz 108 0p_30Hz !1080p_50Hz !1250i_50Hz 720p_50Hz 576p_50Hz DVI_640x480p DVI_800x600p DV I_1024x768p !DVI_1280x720p_50Hz !DVI_1280x720p !DVI_1280x720p_ReducedBlank !DVI_ 640x480p_70Hz !DVI_640x480p_72Hz !DVI_640x480p_75Hz !DVI_640x480p_85Hz !DVI_1280 x720p_70Hz !DVI_1280x720p_72Hz !DVI_1280x720p_75Hz !DVI_1280x720p_85Hz !DVI_1360 x768p_60Hz !DVI_1920x1080p_60Hz_Red !Custom0 !Custom1 !Custom2
best supported mode is 25
using 1920x1080i (50.00 Hz)
HDMI
using colorspace: 1
create surface 1920 1080
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail lard.org>
parsing JPEG header..
SOS cid order (0:1) isn't compatible with the SOF marker (0:0)
parse header failed
lcd: /flash/vmlinux.gz
<5>Linux version 2.6.18-7.4-dm8000 (ubuntu@ubuntu) (gcc version 4.4.4 (GCC) ) #1 SMP Thu Oct 4 02:33:32 CEST 2012
Fetching vars from bootloader... none present, using defaults.
Detected 256 MB on MEMC0 (strap 0x2219c310)
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
1 831ffec4 8302b5b4
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1
CPU revision is: 0002a042
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 154
User-defined physical RAM map:
node [00000000, 09a00000: RAM]
node [09a00000, 06600000: RSVD]
<5>Reserving 102 MB upper memory starting at 09a00000
<7>On node 0 totalpages: 65536
<7> DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists. Total pages: 65536
<5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
before init RAC 0x01e0701f 0x0000000f 0x2fff0000
after init RAC 0x01e0705f 0x0000000f 0x2fff0000
Svara med citat
