Sidan 1 av 5 123 ... SistaSista
Resultat 1 till 10 av 42

Ämne: Dela ut mapp på Rpi

  1. #1
    Seniormedlem SnaBel@s avatar
    Reg.datum
    Sep 2011
    Inlägg
    735
    Tackad
    9 gånger

    Dela ut mapp på Rpi

    Jag har en mapp på min Rpi3 som jag vill dela ut i mitt nätverk, Hur gör jag detta enklast ? Har noll kunskaper om detta. Det är en excelfil som behöver få åtkomst till logfiler på Rpi

    Rpi har 192.168.1.112 och mappen jag vill dela är /home/pi/Desktop/ProfitTrailer den behöver bara ha läs behörighet
    Senast redigerad av SnaBel@ den 2018-01-28 klockan 07:59.
    DM500S, DM500HD, DM800SE,
    Allt är Klon

  2. #2
    ComHit Crew atomizeds avatar
    Reg.datum
    Feb 2004
    Inlägg
    9 231
    Tackad
    1 084 gånger
    Citat Ursprungligen postat av SnaBel@ Visa inlägg
    Jag har en mapp på min Rpi3 som jag vill dela ut i mitt nätverk, Hur gör jag detta enklast ? Har noll kunskaper om detta. Det är en excelfil som behöver få åtkomst till logfiler på Rpi

    Rpi har 192.168.1.112 och mappen jag vill dela är /home/pi/Desktop/ProfitTrailer den behöver bara ha läs behörighet
    Du installerar samba och konfigurerar den. Här är ett exempel du kan följa:
    https://www.opentechguides.com/how-t...r-windows.html
    Har du frågor om hur man gör, ställ dem i forumet! Skicka inte PM till mig!
    Använd SÖK i forumet. LÄS Guider och Wikis. Testa!!


  3. #3
    Seniormedlem SnaBel@s avatar
    Reg.datum
    Sep 2011
    Inlägg
    735
    Tackad
    9 gånger
    Som vanligt så jävlas det. Tror jag gjort rätt, men tydligen inte då inget syns i nätverket . Varför ska detta alltid hända mig, =( Kan ingen hjälpa mig via vnc ?
    Senast redigerad av SnaBel@ den 2018-01-28 klockan 12:20.
    DM500S, DM500HD, DM800SE,
    Allt är Klon

  4. #4
    ComHit Crew atomizeds avatar
    Reg.datum
    Feb 2004
    Inlägg
    9 231
    Tackad
    1 084 gånger
    Hur ser din smb.conf ut? Har du startat om samba efter att du ändrade i smb.conf?

    För skojs skull provade jag att följa exemplet jag länkade till eftersom det var måånga år sedan jag satte upp min egen samba här hemma. Jag hade inga problem att följa exemplet rakt av och det funkade för mig på en test Raspberry Pi.

    Hela nyckeln till samba ligger i smb.conf så troligen är det något där som inte är riktigt. Har du ändrat raden i början så den set ut som nedanstående?

    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    wins support = yes


    Alltså ändrat till yes och tagit bort kommentarstecknet i början på raden?
    Har du frågor om hur man gör, ställ dem i forumet! Skicka inte PM till mig!
    Använd SÖK i forumet. LÄS Guider och Wikis. Testa!!


  5. #5
    Seniormedlem SnaBel@s avatar
    Reg.datum
    Sep 2011
    Inlägg
    735
    Tackad
    9 gånger
    eftersom jag har desktop så gick jag sen in och gjorde ändringarna.

    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which
    # are not shown in this example
    #
    # Some options that are often worth tuning have been included as
    # commented-out examples in this file.
    # - When such options are commented with ";", the proposed setting
    # differs from the default Samba behaviour
    # - When commented with "#", the proposed setting is the default
    # behaviour of Samba but the option is considered important
    # enough to be mentioned here
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic
    # errors.

    #======================= Global Settings =======================

    [global]

    ## Browsing/Identification ###

    # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = LINDER

    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    # wins support = yes

    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z

    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

    #### Networking ####

    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ; interfaces = 127.0.0.0/8 eth0

    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself. However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ; bind interfaces only = yes



    #### Debugging/Accounting ####

    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m

    # Cap the size of the individual log files (in KiB).
    max log size = 1000

    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    # syslog only = no

    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 0

    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


    ####### Authentication #######

    # Server role. Defines in which mode Samba will operate. Possible
    # values are "standalone server", "member server", "classic primary
    # domain controller", "classic backup domain controller", "active
    # directory domain controller".
    #
    # Most people will want "standalone sever" or "member server".
    # Running as "active directory domain controller" will require first
    # running "samba-tool domain provision" to wipe databases and create a
    # new domain.
    server role = standalone server

    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.
    passdb backend = tdbsam

    obey pam restrictions = yes

    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    unix password sync = yes

    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    pam password change = yes

    # This option controls how unsuccessful authentication attempts are mapped
    # to anonymous connections
    map to guest = bad user

    ########## Domains ###########

    #
    # The following settings only takes effect if 'server role = primary
    # classic domain controller', 'server role = backup domain controller'
    # or 'domain logons' is set
    #

    # It specifies the location of the user's
    # profile directory from the client point of view) The following
    # required a [profiles] share to be setup on the samba server (see
    # below)
    ; logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    # logon path = \\%N\%U\profile

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ; logon drive = H:
    # logon home = \\%N\%U

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ; logon script = logon.cmd

    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe. The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

    # This allows machine accounts to be created on the domain controller via the
    # SAMR RPC pipe.
    # The following assumes a "machines" group exists on the system
    ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

    # This allows Unix groups to be created on the domain controller via the SAMR
    # RPC pipe.
    ; add group script = /usr/sbin/addgroup --force-badname %g

    ############ Misc ############

    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ; include = /home/samba/etc/smb.conf.%m

    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ; idmap uid = 10000-20000
    ; idmap gid = 10000-20000
    ; template shell = /bin/bash

    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.

    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ; usershare max shares = 100

    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
    usershare allow guests = yes

    #======================= Share Definitions =======================

    [homes]
    comment = Home Directories
    browseable = no

    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    read only = yes

    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    create mask = 0700

    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    directory mask = 0700

    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.
    # The following parameter makes sure that only "username" can connect
    # to \\server\username
    # This might need tweaking when using external authentication schemes
    valid users = %S

    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ; comment = Network Logon Service
    ; path = /home/samba/netlogon
    ; guest ok = yes
    ; read only = yes

    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ; comment = Users profiles
    ; path = /home/samba/profiles
    ; guest ok = no
    ; browseable = no
    ; create mask = 0600
    ; directory mask = 0700

    [printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
    guest ok = no
    read only = yes
    create mask = 0700

    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    browseable = yes
    read only = yes
    guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # You may need to replace 'lpadmin' with the name of the group your
    # admin users are members of.
    # Please note that you also need to set appropriate Unix permissions
    # to the drivers directory for these users to have write rights in it
    ; write list = root, @lpadmin

    [pishare]
    comment = Pi Shared Folder
    path = /home/pi/Desktop/ProfitTrailer
    browsable = yes
    guest ok = yes
    writable = yes
    DM500S, DM500HD, DM800SE,
    Allt är Klon

  6. #6
    ComHit Crew atomizeds avatar
    Reg.datum
    Feb 2004
    Inlägg
    9 231
    Tackad
    1 084 gånger
    Du måste ta bort kommentarstecknet som står först på denna raden:
    # wins support = yes

    Det ska alltså INTE vara någon # i början.
    Senast redigerad av atomized den 2018-01-28 klockan 15:18.
    Har du frågor om hur man gör, ställ dem i forumet! Skicka inte PM till mig!
    Använd SÖK i forumet. LÄS Guider och Wikis. Testa!!


  7. #7
    Seniormedlem SnaBel@s avatar
    Reg.datum
    Sep 2011
    Inlägg
    735
    Tackad
    9 gånger
    Så typiskt av mig. Så nu är det bort taget. När jag startar om så får jag nu detta

    Första gången jag starta om så fick jag inget error, men nu får jag det.

    sudo /etc/init.d/samba restart
    [....] Restarting nmbd (via systemctl): nmbd.serviceJob for nmbd.service failed because the control process exited with error code.
    See "systemctl status nmbd.service" and "journalctl -xe" for details.
    failed!
    DM500S, DM500HD, DM800SE,
    Allt är Klon

  8. #8
    ComHit Crew atomizeds avatar
    Reg.datum
    Feb 2004
    Inlägg
    9 231
    Tackad
    1 084 gånger
    Citat Ursprungligen postat av SnaBel@ Visa inlägg
    Så typiskt av mig. Så nu är det bort taget. När jag startar om så får jag nu detta

    Första gången jag starta om så fick jag inget error, men nu får jag det.

    sudo /etc/init.d/samba restart
    [....] Restarting nmbd (via systemctl): nmbd.serviceJob for nmbd.service failed because the control process exited with error code.
    See "systemctl status nmbd.service" and "journalctl -xe" for details.
    failed!
    Jaha, det var inget jag känner igen. Misstänker att det kanske är så att du råkat peta på något annat i smb.conf filen. Det är smb.conf som styr hela samba så det finns inte mycket annat som kan krångla egentligen.

    Vad säger kommandot:
    systemctl status nmbd.service

    Du får nog trycka q för att avsluta sedan. Det fick jag göra på min burk.
    Har du frågor om hur man gör, ställ dem i forumet! Skicka inte PM till mig!
    Använd SÖK i forumet. LÄS Guider och Wikis. Testa!!


  9. #9
    Seniormedlem SnaBel@s avatar
    Reg.datum
    Sep 2011
    Inlägg
    735
    Tackad
    9 gånger
    nmbd.service - Samba NMB Daemon
    Loaded: loaded (/lib/systemd/system/nmbd.service; enabled; vendor preset: enabled)
    Active: failed (Result: exit-code) since Sun 2018-01-28 16:11:45 CET; 48s ago
    Docs: man:nmbd(8)
    man:samba(7)
    man:smb.conf(5)
    Process: 5015 ExecStart=/usr/sbin/nmbd $NMBDOPTIONS (code=exited, status=1/FAILURE)
    Main PID: 5015 (code=exited, status=1/FAILURE)

    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: Starting Samba NMB Daemon...
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: nmbd.service: Main process exited, code=exited, status=1/FAILURE
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: Failed to start Samba NMB Daemon.
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: nmbd.service: Unit entered failed state.
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: nmbd.service: Failed with result 'exit-code'.
    ~
    DM500S, DM500HD, DM800SE,
    Allt är Klon

  10. #10
    ComHit Crew atomizeds avatar
    Reg.datum
    Feb 2004
    Inlägg
    9 231
    Tackad
    1 084 gånger
    Citat Ursprungligen postat av SnaBel@ Visa inlägg
    nmbd.service - Samba NMB Daemon
    Loaded: loaded (/lib/systemd/system/nmbd.service; enabled; vendor preset: enabled)
    Active: failed (Result: exit-code) since Sun 2018-01-28 16:11:45 CET; 48s ago
    Docs: man:nmbd(8)
    man:samba(7)
    man:smb.conf(5)
    Process: 5015 ExecStart=/usr/sbin/nmbd $NMBDOPTIONS (code=exited, status=1/FAILURE)
    Main PID: 5015 (code=exited, status=1/FAILURE)

    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: Starting Samba NMB Daemon...
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: nmbd.service: Main process exited, code=exited, status=1/FAILURE
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: Failed to start Samba NMB Daemon.
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: nmbd.service: Unit entered failed state.
    Jan 28 16:11:45 Team-Erik-Linkan-Btc systemd[1]: nmbd.service: Failed with result 'exit-code'.
    ~
    Det sa inte så mycket mer tyvärr. Har du sparat någon backup av smb.conf innan du ändrade i den så pröva att lägga tillbaka den.
    Annars finns originalfilen på /usr/share/samba/smb.conf. Men se upp så du inte ändrar på originalet utan kopiera den först till /etc/samba.
    Typ:
    döp om den felaktiga filen:
    cd /etc/samba
    mv smb.conf smb.conf.kass
    kopiera dit en ny:
    cp /usr/share/samba/smb.conf smb.conf

    Prova sedan först att starta om samba och se om felet är borta. Om felet är borta kan du prova att lägga in dina ändringar i smb.conf igen.
    Har du frågor om hur man gör, ställ dem i forumet! Skicka inte PM till mig!
    Använd SÖK i forumet. LÄS Guider och Wikis. Testa!!


Liknande ämnen

  1. Timeshift mot utdelad mapp på PC:n?
    Av ctm555 i forum Dreambox
    Svar: 11
    Senaste inlägg: 2010-03-21, 20:00
  2. mgcamd filplacering - mapp
    Av hingstin i forum Dreambox
    Svar: 2
    Senaste inlägg: 2007-08-11, 15:28
  3. mount en mapp på 7025
    Av lonn2se i forum Dreambox
    Svar: 0
    Senaste inlägg: 2006-09-01, 20:25
  4. låsa mapp
    Av rottweiler i forum Övrigt
    Svar: 6
    Senaste inlägg: 2004-12-27, 22:35
  5. spärra mapp-programm
    Av rottweiler i forum Övrigt
    Svar: 4
    Senaste inlägg: 2004-04-07, 09:54

Behörigheter för att posta

  • Du får inte posta nya ämnen
  • Du får inte posta svar
  • Du får inte posta bifogade filer
  • Du får inte redigera dina inlägg
  •  
stöd oss
ComHit.net är en ideell sidan som drivs helt utan reklamintäkter, detta för att du som användare ska slippa all störande reklam och diskutera de saker du är intresserad av.
Skulle man däremot känna att man vill donera en slant för att hjälpa ComHit.net att bli bättre är ni välkomna att donera via länken nedan.

https://www.paypal.me/comhit/
Följ oss